VRRPV3-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY,
	OBJECT-TYPE,
	NOTIFICATION-TYPE,
	Counter32,
	Integer32,
	mib-2,
	Unsigned32,
	Counter64,
	TimeTicks
		FROM SNMPv2-SMI		-- RFC2578
	TEXTUAL-CONVENTION,
	RowStatus,
	MacAddress,
	TruthValue,
	TimeStamp,
	TimeInterval
		FROM SNMPv2-TC		-- RFC2579
	MODULE-COMPLIANCE,
	OBJECT-GROUP,
	NOTIFICATION-GROUP
		FROM SNMPv2-CONF		-- RFC2580
	ifIndex
		FROM IF-MIB		-- RFC2863
	InetAddressType,
	InetAddress
		FROM INET-ADDRESS-MIB;

-- RFC4001

vrrpv3MIB MODULE-IDENTITY
	LAST-UPDATED "201202130000Z"	-- Feb 13, 2012 12:00:00 AM
	ORGANIZATION "IETF VRRP Working Group"
	CONTACT-INFO
		"WG E-Mail: vrrp@ietf.org

		Editor:    Kalyan Tata
		           Nokia
		           313 Fairchild Dr,
		           Mountain View, CA 94043
		           Tata_kalyan@yahoo.com"
	DESCRIPTION
		"This MIB describes objects used for managing Virtual
		Router Redundancy Protocol version 3 (VRRPv3).

		Copyright (c) 2012 IETF Trust and the persons
		identified as authors of the code.  All rights
		reserved.

		Redistribution and use in source and binary forms,
		with or without modification, is permitted pursuant
		to, and subject to the license terms contained in,
		the Simplified BSD License set forth in Section
		4.c of the IETF Trust's Legal Provisions Relating
		to IETF Documents
		(http://trustee.ietf.org/license-info).

		This version of the MIB module is part of RFC 6527.
		Please see the RFC for full legal notices."
	REVISION "201202120000Z"	-- Feb 12, 2012 12:00:00 AM
	DESCRIPTION
		"Initial version as published in RFC 6527."
	-- 1.3.6.1.2.1.207
	::= { mib-2 207 }


-- Textual Conventions

Vrrpv3VrIdTC ::= TEXTUAL-CONVENTION
	DISPLAY-HINT "d"
	STATUS  current
	DESCRIPTION
		"The value of the Virtual Router Identifier noted as
		(VRID) in RFC 5798.  This, along with interface index
		(ifIndex) and IP version, serves to uniquely identify
		a virtual router on a given VRRP router."
	REFERENCE
		"RFC 5798 (Sections 3 and 5.2.3)"
	SYNTAX Integer32 (1..255)


--  VRRPv3 MIB Groups

vrrpv3Notifications OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.207.0
	::= { vrrpv3MIB 0 }

vrrpv3Objects OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.207.1
	::= { vrrpv3MIB 1 }

vrrpv3Conformance OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.207.2
	::= { vrrpv3MIB 2 }

-- VRRPv3 MIB Objects

vrrpv3Operations OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.207.1.1
	::= { vrrpv3Objects 1 }

vrrpv3Statistics OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.207.1.2
	::= { vrrpv3Objects 2 }

--  VRRPv3 Operations Table

vrrpv3OperationsTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF Vrrpv3OperationsEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Unified Operations table for a VRRP router that
		consists of a sequence (i.e., one or more conceptual
		rows) of 'vrrpv3OperationsEntry' items each of which
		describe the operational characteristics of a virtual
		router."
	-- 1.3.6.1.2.1.207.1.1.1
	::= { vrrpv3Operations 1 }


vrrpv3OperationsEntry OBJECT-TYPE
	SYNTAX  Vrrpv3OperationsEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the vrrpv3OperationsTable containing the
		operational characteristics of a virtual router.
		On a VRRP router, a given virtual router is
		identified by a combination of ifIndex, VRID, and
		the IP version.  ifIndex represents an interface of
		the router.

		A row must be created with vrrpv3OperationsStatus
		set to initialize(1) and cannot transition to
		backup(2) or master(3) until





		vrrpv3OperationsRowStatus is transitioned to
		active(1).

		The information in this table is persistent and when
		written the entity SHOULD save the change to non-
		volatile storage."
	INDEX {
		ifIndex,
		vrrpv3OperationsVrId,
		vrrpv3OperationsInetAddrType }
	-- 1.3.6.1.2.1.207.1.1.1.1
	::= { vrrpv3OperationsTable 1 }


Vrrpv3OperationsEntry ::= SEQUENCE {

	vrrpv3OperationsVrId           Vrrpv3VrIdTC,
	vrrpv3OperationsInetAddrType   InetAddressType,
	vrrpv3OperationsMasterIpAddr   InetAddress,
	vrrpv3OperationsPrimaryIpAddr  InetAddress,
	vrrpv3OperationsVirtualMacAddr MacAddress,
	vrrpv3OperationsStatus         INTEGER,
	vrrpv3OperationsPriority       Unsigned32,
	vrrpv3OperationsAddrCount      Integer32,
	vrrpv3OperationsAdvInterval    TimeInterval,
	vrrpv3OperationsPreemptMode    TruthValue,
	vrrpv3OperationsAcceptMode     TruthValue,
	vrrpv3OperationsUpTime         TimeTicks,
	vrrpv3OperationsRowStatus      RowStatus }


vrrpv3OperationsVrId OBJECT-TYPE
	SYNTAX  Vrrpv3VrIdTC
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"This object contains the Virtual Router Identifier
		(VRID)."
	REFERENCE
		"RFC 4001"
	-- 1.3.6.1.2.1.207.1.1.1.1.1
	::= { vrrpv3OperationsEntry 1 }


vrrpv3OperationsInetAddrType OBJECT-TYPE
	SYNTAX  InetAddressType
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The IP address type of Vrrpv3OperationsEntry and
		Vrrpv3AssociatedIpAddrEntry.  This value determines
		the type for vrrpv3OperationsMasterIpAddr,
		vrrpv3OperationsPrimaryIpAddr, and
		vrrpv3AssociatedIpAddrAddress.

		 ipv4(1) and ipv6(2) are the only two values supported
		 in this MIB module."
	REFERENCE
		"RFC 4001"
	-- 1.3.6.1.2.1.207.1.1.1.1.2
	::= { vrrpv3OperationsEntry 2 }


vrrpv3OperationsMasterIpAddr OBJECT-TYPE
	SYNTAX  InetAddress
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The master router's real IP address.  The master router
		would set this address to vrrpv3OperationsPrimaryIpAddr
		while transitioning to master state.  For backup
		routers, this is the IP address listed as the source in
		the VRRP advertisement last received by this virtual
		router."
	REFERENCE
		"RFC 5798"
	-- 1.3.6.1.2.1.207.1.1.1.1.3
	::= { vrrpv3OperationsEntry 3 }


vrrpv3OperationsPrimaryIpAddr OBJECT-TYPE
	SYNTAX  InetAddress
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"In the case where there is more than one IP
		Address (associated IP addresses) for a given
		'ifIndex', this object is used to specify the IP
		address that will become the
		vrrpv3OperationsMasterIpAddr', should the virtual
		router transition from backup state to master."
	-- 1.3.6.1.2.1.207.1.1.1.1.4
	::= { vrrpv3OperationsEntry 4 }


vrrpv3OperationsVirtualMacAddr OBJECT-TYPE
	SYNTAX  MacAddress
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The virtual MAC address of the virtual router.
		Although this object can be derived from the
		'vrrpv3OperationsVrId' object, it is defined so that it
		is easily obtainable by a management application and
		can be included in VRRP-related SNMP notifications."
	-- 1.3.6.1.2.1.207.1.1.1.1.5
	::= { vrrpv3OperationsEntry 5 }


vrrpv3OperationsStatus OBJECT-TYPE
	SYNTAX  INTEGER {
			initialize(1),
			backup(2),
			master(3) }
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The current state of the virtual router.  This object
		has three defined values:

		- 'initialize', which indicates that the
		   virtual router is waiting for a startup event.

		- 'backup', which indicates that the virtual router is
		   monitoring the availability of the master router.

		- 'master', which indicates that the virtual router
		   is forwarding packets for IP addresses that are
		   associated with this router."
	REFERENCE
		"RFC 5798"
	-- 1.3.6.1.2.1.207.1.1.1.1.6
	::= { vrrpv3OperationsEntry 6 }


vrrpv3OperationsPriority OBJECT-TYPE
	SYNTAX  Unsigned32 (0..255)
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"This object specifies the priority to be used for the
		virtual router master election process; higher values
		imply higher priority.

		A priority of '0', although not settable, is sent by
		the master router to indicate that this router has





		ceased to participate in VRRP, and a backup virtual
		router should transition to become a new master.

		A priority of 255 is used for the router that owns the
		associated IP address(es) for VRRP over IPv4 and hence
		is not settable.

		Setting the values of this object to 0 or 255 should be
		rejected by the agents implementing this MIB module.
		For example, an SNMP agent would return 'badValue(3)'
		when a user tries to set the values 0 or 255 for this
		object."
	REFERENCE
		"RFC 5798, Section 6.1"
	DEFVAL { 100 }
	-- 1.3.6.1.2.1.207.1.1.1.1.7
	::= { vrrpv3OperationsEntry 7 }


vrrpv3OperationsAddrCount OBJECT-TYPE
	SYNTAX  Integer32 (0..255)
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of IP addresses that are associated with
		this virtual router.  This number is equal to the
		number of rows in the vrrpv3AssociatedAddrTable that
		correspond to a given ifIndex/VRID/IP version."
	REFERENCE
		"RFC 5798, Section 6.1"
	-- 1.3.6.1.2.1.207.1.1.1.1.8
	::= { vrrpv3OperationsEntry 8 }


vrrpv3OperationsAdvInterval OBJECT-TYPE
	SYNTAX  TimeInterval (1..4095)
	UNITS	"centiseconds"
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The time interval, in centiseconds, between sending
		advertisement messages.  Only the master router sends
		VRRP advertisements."
	REFERENCE
		"RFC 5798, Section 6.1"
	DEFVAL { 100 }
	-- 1.3.6.1.2.1.207.1.1.1.1.9
	::= { vrrpv3OperationsEntry 9 }


vrrpv3OperationsPreemptMode OBJECT-TYPE
	SYNTAX  TruthValue
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"Controls whether a higher priority virtual router will
		preempt a lower priority master."
	REFERENCE
		"RFC 5798, Section 6.1"
	DEFVAL { true }
	-- 1.3.6.1.2.1.207.1.1.1.1.10
	::= { vrrpv3OperationsEntry 10 }


vrrpv3OperationsAcceptMode OBJECT-TYPE
	SYNTAX  TruthValue
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"Controls whether a virtual router in master state
		will accept packets addressed to the address owner's
		IPv6 address as its own if it is not the IPv6 address
		owner.  Default is false(2).
		This object is not relevant for rows representing VRRP
		over IPv4 and should be set to false(2)."
	DEFVAL { false }
	-- 1.3.6.1.2.1.207.1.1.1.1.11
	::= { vrrpv3OperationsEntry 11 }


vrrpv3OperationsUpTime OBJECT-TYPE
	SYNTAX  TimeTicks
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"This value represents the amount of time, in
		TimeTicks (hundredth of a second), since this virtual
		router (i.e., the 'vrrpv3OperationsStatus')
		transitioned out of 'initialize'."
	REFERENCE
		"RFC 5798, Section 6.1"
	-- 1.3.6.1.2.1.207.1.1.1.1.12
	::= { vrrpv3OperationsEntry 12 }


vrrpv3OperationsRowStatus OBJECT-TYPE
	SYNTAX  RowStatus
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The RowStatus variable should be used in accordance to
		installation and removal conventions for conceptual
		rows.

		To create a row in this table, a manager sets this
		object to either createAndGo(4) or createAndWait(5).
		Until instances of all corresponding columns are
		appropriately configured, the value of the
		corresponding instance of the
		'vrrpv3OperationsRowStatus' column will be read as
		notReady(3).





		In particular, a newly created row cannot be made
		active(1) until (minimally) the corresponding instance
		of vrrpv3OperationsInetAddrType, vrrpv3OperationsVrId,
		and vrrpv3OperationsPrimaryIpAddr has been set, and
		there is at least one active row in the
		'vrrpv3AssociatedIpAddrTable' defining an associated
		IP address.

		notInService(2) should be used to administratively
		bring the row down.

		A typical order of operation to add a row is:
		1. Create a row in vrrpv3OperationsTable with
		createAndWait(5).
		2. Create one or more corresponding rows in
		vrrpv3AssociatedIpAddrTable.
		3. Populate the vrrpv3OperationsEntry.
		4. Set vrrpv3OperationsRowStatus to active(1).

		A typical order of operation to delete an entry is:
		1. Set vrrpv3OperationsRowStatus to notInService(2).
		2. Set the corresponding rows in
		vrrpv3AssociatedIpAddrTable to destroy(6) to delete
		the entry.
		3. Set vrrpv3OperationsRowStatus to destroy(6) to
		delete the entry."
	-- 1.3.6.1.2.1.207.1.1.1.1.13
	::= { vrrpv3OperationsEntry 13 }


--  VRRP Associated Address Table

vrrpv3AssociatedIpAddrTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF Vrrpv3AssociatedIpAddrEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The table of addresses associated with each virtual
		router."
	-- 1.3.6.1.2.1.207.1.1.2
	::= { vrrpv3Operations 2 }


vrrpv3AssociatedIpAddrEntry OBJECT-TYPE
	SYNTAX  Vrrpv3AssociatedIpAddrEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the table contains an IP address that is
		associated with a virtual router.  The number of rows
		for a given IP version, VrID, and ifIndex will equal
		the number of IP addresses associated (e.g., backed up)





		by the virtual router (equivalent to
		'vrrpv3OperationsIpAddrCount').

		Rows in the table cannot be modified unless the value
		of 'vrrpv3OperationsStatus' for the corresponding entry
		in the vrrpv3OperationsTable has transitioned to
		initialize(1).

		The information in this table is persistent and when
		written the entity SHOULD save the change to non-
		volatile storage."
	INDEX {
		ifIndex,
		vrrpv3OperationsVrId,
		vrrpv3OperationsInetAddrType,
		vrrpv3AssociatedIpAddrAddress }
	-- 1.3.6.1.2.1.207.1.1.2.1
	::= { vrrpv3AssociatedIpAddrTable 1 }


Vrrpv3AssociatedIpAddrEntry ::= SEQUENCE {

	vrrpv3AssociatedIpAddrAddress   InetAddress,
	vrrpv3AssociatedIpAddrRowStatus RowStatus }


vrrpv3AssociatedIpAddrAddress OBJECT-TYPE
	SYNTAX  InetAddress (SIZE (0 | 4 | 16))
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The assigned IP addresses that a virtual router is
		responsible for backing up.

		The IP address type is determined by the value of
		vrrpv3OperationsInetAddrType in the index of this
		row."
	REFERENCE
		"RFC 5798"
	-- 1.3.6.1.2.1.207.1.1.2.1.1
	::= { vrrpv3AssociatedIpAddrEntry 1 }


vrrpv3AssociatedIpAddrRowStatus OBJECT-TYPE
	SYNTAX  RowStatus
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The row status variable, used according to
		installation and removal conventions for conceptual





		rows.  To create a row in this table, a manager sets
		this object to either createAndGo(4) or
		createAndWait(5).  Setting this object to active(1)
		results in the addition of an associated address for a
		virtual router.  Setting this object to notInService(2)
		results in administratively bringing down the row.

		Destroying the entry or setting it to destroy(6)
		removes the associated address from the virtual router.
		The use of other values is implementation-dependent.

		Implementations should not allow deletion of the last
		row corresponding to an active row in
		vrrpv3OperationsTable.

		Refer to the description of vrrpv3OperationsRowStatus
		for typical row creation and deletion scenarios."
	-- 1.3.6.1.2.1.207.1.1.2.1.2
	::= { vrrpv3AssociatedIpAddrEntry 2 }


--  VRRP Router Statistics

vrrpv3RouterChecksumErrors OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The total number of VRRP packets received with an
		invalid VRRP checksum value.

		Discontinuities in the value of this counter can occur
		at re-initialization of the management system, and at
		other times as indicated by the value of
		vrrpv3GlobalStatisticsDiscontinuityTime."
	REFERENCE
		"RFC 5798, Section 5.2.8"
	-- 1.3.6.1.2.1.207.1.2.1
	::= { vrrpv3Statistics 1 }


vrrpv3RouterVersionErrors OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The total number of VRRP packets received with an
		unknown or unsupported version number.

		Discontinuities in the value of this counter can occur
		at re-initialization of the management system, and at






		other times as indicated by the value of
		vrrpv3GlobalStatisticsDiscontinuityTime."
	REFERENCE
		"RFC 5798, Section 5.2.1"
	-- 1.3.6.1.2.1.207.1.2.2
	::= { vrrpv3Statistics 2 }


vrrpv3RouterVrIdErrors OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The total number of VRRP packets received with a
		 VRID that is not valid for any virtual router on this
		 router.

		Discontinuities in the value of this counter can occur
		at re-initialization of the management system, and at
		other times as indicated by the value of
		vrrpv3GlobalStatisticsDiscontinuityTime."
	REFERENCE
		"RFC 5798, Section 5.2.3"
	-- 1.3.6.1.2.1.207.1.2.3
	::= { vrrpv3Statistics 3 }


vrrpv3GlobalStatisticsDiscontinuityTime OBJECT-TYPE
	SYNTAX  TimeStamp
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The value of sysUpTime on the most recent occasion at
		which one of vrrpv3RouterChecksumErrors,
		vrrpv3RouterVersionErrors, and vrrpv3RouterVrIdErrors
		suffered a discontinuity.

		If no such discontinuities have occurred since the last
		re-initialization of the local management subsystem,
		then this object contains a zero value."
	-- 1.3.6.1.2.1.207.1.2.4
	::= { vrrpv3Statistics 4 }


--  VRRP Router Statistics Table

vrrpv3StatisticsTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF Vrrpv3StatisticsEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Table of virtual router statistics."
	-- 1.3.6.1.2.1.207.1.2.5
	::= { vrrpv3Statistics 5 }


vrrpv3StatisticsEntry OBJECT-TYPE
	SYNTAX  Vrrpv3StatisticsEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the table containing statistics
		information about a given virtual router."
	AUGMENTS {
		vrrpv3OperationsEntry }
	-- 1.3.6.1.2.1.207.1.2.5.1
	::= { vrrpv3StatisticsTable 1 }


Vrrpv3StatisticsEntry ::= SEQUENCE {

	vrrpv3StatisticsMasterTransitions      Counter32,
	vrrpv3StatisticsNewMasterReason        INTEGER,
	vrrpv3StatisticsRcvdAdvertisements     Counter64,
	vrrpv3StatisticsAdvIntervalErrors      Counter64,
	vrrpv3StatisticsIpTtlErrors            Counter64,
	vrrpv3StatisticsProtoErrReason         INTEGER,
	vrrpv3StatisticsRcvdPriZeroPackets     Counter64,
	vrrpv3StatisticsSentPriZeroPackets     Counter64,
	vrrpv3StatisticsRcvdInvalidTypePackets Counter64,
	vrrpv3StatisticsAddressListErrors      Counter64,
	vrrpv3StatisticsPacketLengthErrors     Counter64,
	vrrpv3StatisticsRowDiscontinuityTime   TimeStamp,
	vrrpv3StatisticsRefreshRate            Unsigned32 }


vrrpv3StatisticsMasterTransitions OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The total number of times that this virtual router's
		state has transitioned to master state.






		Discontinuities in the value of this counter can occur
		at re-initialization of the management system, and at
		other times as indicated by the value of
		vrrpv3StatisticsRowDiscontinuityTime."
	-- 1.3.6.1.2.1.207.1.2.5.1.1
	::= { vrrpv3StatisticsEntry 1 }


vrrpv3StatisticsNewMasterReason OBJECT-TYPE
	SYNTAX  INTEGER {
			notMaster(0),
			priority(1),
			preempted(2),
			masterNoResponse(3) }
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"This indicates the reason for the virtual router to
		transition to master state.  If the virtual router
		never transitioned to master state, the value of this
		object is notMaster(0).  Otherwise, this indicates the
		reason this virtual router transitioned to master
		state the last time.  Used by vrrpv3NewMaster
		notification."
	-- 1.3.6.1.2.1.207.1.2.5.1.2
	::= { vrrpv3StatisticsEntry 2 }


vrrpv3StatisticsRcvdAdvertisements OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The total number of VRRP advertisements received by
		this virtual router.

		Discontinuities in the value of this counter can occur
		at re-initialization of the management system, and at
		other times as indicated by the value of
		vrrpv3StatisticsRowDiscontinuityTime."
	-- 1.3.6.1.2.1.207.1.2.5.1.3
	::= { vrrpv3StatisticsEntry 3 }


vrrpv3StatisticsAdvIntervalErrors OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The total number of VRRP advertisement packets
		received for which the advertisement interval is






		different from the vrrpv3OperationsAdvInterval
		configured on this virtual router.

		Discontinuities in the value of this counter can occur
		at re-initialization of the management system, and at
		other times as indicated by the value of
		vrrpv3StatisticsRowDiscontinuityTime."
	-- 1.3.6.1.2.1.207.1.2.5.1.4
	::= { vrrpv3StatisticsEntry 4 }


vrrpv3StatisticsIpTtlErrors OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The total number of VRRP packets received by the
		virtual router with IPv4 TTL (for VRRP over IPv4) or
		IPv6 Hop Limit (for VRRP over IPv6) not equal to 255.

		Discontinuities in the value of this counter can occur
		at re-initialization of the management system, and at
		other times as indicated by the value of
		vrrpv3StatisticsRowDiscontinuityTime."
	REFERENCE
		"RFC 5798, Section 5.1.1.3"
	-- 1.3.6.1.2.1.207.1.2.5.1.5
	::= { vrrpv3StatisticsEntry 5 }


vrrpv3StatisticsProtoErrReason OBJECT-TYPE
	SYNTAX  INTEGER {
			noError(0),
			ipTtlError(1),
			versionError(2),
			checksumError(3),
			vrIdError(4) }
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"This indicates the reason for the last protocol
		error.  This SHOULD be set to noError(0) when no
		protocol errors are encountered.  Used by
		vrrpv3ProtoError notification."
	-- 1.3.6.1.2.1.207.1.2.5.1.6
	::= { vrrpv3StatisticsEntry 6 }


vrrpv3StatisticsRcvdPriZeroPackets OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The total number of VRRP packets received by the
		virtual router with a priority of '0'.

		Discontinuities in the value of this counter can occur
		at re-initialization of the management system, and at
		other times as indicated by the value of
		vrrpv3StatisticsRowDiscontinuityTime."
	REFERENCE
		"RFC 5798, Section 5.2.4"
	-- 1.3.6.1.2.1.207.1.2.5.1.7
	::= { vrrpv3StatisticsEntry 7 }


vrrpv3StatisticsSentPriZeroPackets OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The total number of VRRP packets sent by the virtual
		router with a priority of '0'.

		Discontinuities in the value of this counter can occur
		at re-initialization of the management system, and at
		other times as indicated by the value of
		vrrpv3StatisticsRowDiscontinuityTime."
	REFERENCE
		"RFC 5798, Section 5.2.4"
	-- 1.3.6.1.2.1.207.1.2.5.1.8
	::= { vrrpv3StatisticsEntry 8 }


vrrpv3StatisticsRcvdInvalidTypePackets OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of VRRP packets received by the virtual
		router with an invalid value in the 'type' field.

		Discontinuities in the value of this counter can occur
		at re-initialization of the management system, and at
		other times as indicated by the value of
		vrrpv3StatisticsRowDiscontinuityTime."
	-- 1.3.6.1.2.1.207.1.2.5.1.9
	::= { vrrpv3StatisticsEntry 9 }


vrrpv3StatisticsAddressListErrors OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The total number of packets received for which the
		address list does not match the locally configured
		list for the virtual router.






		Discontinuities in the value of this counter can occur
		at re-initialization of the management system, and at
		other times as indicated by the value of
		vrrpv3StatisticsRowDiscontinuityTime."
	-- 1.3.6.1.2.1.207.1.2.5.1.10
	::= { vrrpv3StatisticsEntry 10 }


vrrpv3StatisticsPacketLengthErrors OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The total number of packets received with a packet
		length less than the length of the VRRP header.

		Discontinuities in the value of this counter can occur
		at re-initialization of the management system, and at
		other times as indicated by the value of
		vrrpv3StatisticsRowDiscontinuityTime."
	-- 1.3.6.1.2.1.207.1.2.5.1.11
	::= { vrrpv3StatisticsEntry 11 }


vrrpv3StatisticsRowDiscontinuityTime OBJECT-TYPE
	SYNTAX  TimeStamp
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The value of sysUpTime on the most recent occasion at
		which any one or more of this entry's counters
		suffered a discontinuity.

		If no such discontinuities have occurred since the last
		re-initialization of the local management subsystem,
		then this object contains a zero value."
	-- 1.3.6.1.2.1.207.1.2.5.1.12
	::= { vrrpv3StatisticsEntry 12 }


vrrpv3StatisticsRefreshRate OBJECT-TYPE
	SYNTAX  Unsigned32
	UNITS	"milliseconds"
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The minimum reasonable polling interval for this entry.
		This object provides an indication of the minimum
		amount of time required to update the counters in this
		entry."
	-- 1.3.6.1.2.1.207.1.2.5.1.13
	::= { vrrpv3StatisticsEntry 13 }



--   Notification Definitions
--   Notifications may be controlled using SNMP-NOTIFICATION-MIB

vrrpv3NewMaster NOTIFICATION-TYPE
	OBJECTS {
		vrrpv3OperationsMasterIpAddr,
		vrrpv3StatisticsNewMasterReason}
	STATUS  current
	DESCRIPTION
		"The newMaster notification indicates that the sending
		agent has transitioned to master state."
	-- 1.3.6.1.2.1.207.0.1
	::= { vrrpv3Notifications 1 }


vrrpv3ProtoError NOTIFICATION-TYPE
	OBJECTS {
		vrrpv3StatisticsProtoErrReason}
	STATUS  current
	DESCRIPTION
		"The notification indicates that the sending agent has
		encountered the protocol error indicated by
		vrrpv3StatisticsProtoErrReason."
	-- 1.3.6.1.2.1.207.0.2
	::= { vrrpv3Notifications 2 }

--  Conformance Information

vrrpv3Compliances OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.207.2.1
	::= { vrrpv3Conformance 1 }

vrrpv3Groups OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.207.2.2
	::= { vrrpv3Conformance 2 }


-- Compliance Statements

vrrpv3FullCompliance MODULE-COMPLIANCE
	STATUS  current
	DESCRIPTION
		"The compliance statement"

	MODULE 
	MANDATORY-GROUPS {
			vrrpv3OperationsGroup,
			vrrpv3StatisticsGroup,
			vrrpv3InfoGroup,
			vrrpv3NotificationsGroup }

	OBJECT vrrpv3OperationsPriority
	  WRITE-SYNTAX Unsigned32 (1..254)
	  DESCRIPTION 
		"Setable values are from 1 to 254."
	-- 1.3.6.1.2.1.207.2.1.1
	::= { vrrpv3Compliances 1 }


vrrpv3ReadOnlyCompliance MODULE-COMPLIANCE
	STATUS  current
	DESCRIPTION
		"When this MIB module is implemented without support
		for read-create (i.e., in read-only mode), then such
		an implementation can claim read-only compliance.
		Such a device can then be monitored, but cannot be
		configured with this MIB."

	MODULE 
	MANDATORY-GROUPS {
			vrrpv3OperationsGroup,
			vrrpv3StatisticsGroup,
			vrrpv3StatisticsDiscontinuityGroup,
			vrrpv3InfoGroup,
			vrrpv3NotificationsGroup }

	OBJECT vrrpv3OperationsPriority
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT vrrpv3OperationsPrimaryIpAddr
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT vrrpv3OperationsAdvInterval
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT vrrpv3OperationsPreemptMode
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT vrrpv3OperationsAcceptMode
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT vrrpv3OperationsRowStatus
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT vrrpv3AssociatedIpAddrRowStatus
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	-- 1.3.6.1.2.1.207.2.1.2
	::= { vrrpv3Compliances 2 }

-- Conformance Groups

vrrpv3OperationsGroup OBJECT-GROUP
	OBJECTS {
		vrrpv3OperationsVirtualMacAddr,
		vrrpv3OperationsStatus,
		vrrpv3OperationsPriority,
		vrrpv3OperationsMasterIpAddr,
		vrrpv3OperationsAdvInterval,
		vrrpv3OperationsPreemptMode,
		vrrpv3OperationsAcceptMode,
		vrrpv3OperationsUpTime,
		vrrpv3OperationsRowStatus,
		vrrpv3OperationsAddrCount,
		vrrpv3OperationsPrimaryIpAddr,
		vrrpv3AssociatedIpAddrRowStatus }
	STATUS  current
	DESCRIPTION
		"Conformance group for VRRPv3 operations."
	-- 1.3.6.1.2.1.207.2.2.1
	::= { vrrpv3Groups 1 }

vrrpv3StatisticsGroup OBJECT-GROUP
	OBJECTS {
		vrrpv3RouterChecksumErrors,
		vrrpv3RouterVersionErrors,
		vrrpv3RouterVrIdErrors,
		vrrpv3StatisticsMasterTransitions,
		vrrpv3StatisticsNewMasterReason,
		vrrpv3StatisticsRcvdAdvertisements,
		vrrpv3StatisticsAdvIntervalErrors,
		vrrpv3StatisticsRcvdPriZeroPackets,
		vrrpv3StatisticsSentPriZeroPackets,
		vrrpv3StatisticsRcvdInvalidTypePackets,
		vrrpv3StatisticsIpTtlErrors,
		vrrpv3StatisticsProtoErrReason,
		vrrpv3StatisticsAddressListErrors,
		vrrpv3StatisticsPacketLengthErrors,
		vrrpv3StatisticsRowDiscontinuityTime,
		vrrpv3StatisticsRefreshRate }
	STATUS  current
	DESCRIPTION
		"Conformance group for VRRPv3 statistics."
	-- 1.3.6.1.2.1.207.2.2.2
	::= { vrrpv3Groups 2 }

vrrpv3StatisticsDiscontinuityGroup OBJECT-GROUP
	OBJECTS {
		vrrpv3GlobalStatisticsDiscontinuityTime }
	STATUS  current
	DESCRIPTION
		"Objects providing information about counter
		discontinuities."
	-- 1.3.6.1.2.1.207.2.2.3
	::= { vrrpv3Groups 3 }

vrrpv3InfoGroup OBJECT-GROUP
	OBJECTS {
		vrrpv3StatisticsProtoErrReason,
		vrrpv3StatisticsNewMasterReason }
	STATUS  current
	DESCRIPTION
		"Conformance group for objects contained in VRRPv3
		notifications."
	-- 1.3.6.1.2.1.207.2.2.4
	::= { vrrpv3Groups 4 }

vrrpv3NotificationsGroup NOTIFICATION-GROUP
	NOTIFICATIONS {
		vrrpv3NewMaster,
		vrrpv3ProtoError }
	STATUS  current
	DESCRIPTION
		"The VRRP MIB Notification Group."
	-- 1.3.6.1.2.1.207.2.2.5
	::= { vrrpv3Groups 5 }

END
