SCTP-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY,
	OBJECT-TYPE,
	Integer32,
	Unsigned32,
	Gauge32,
	Counter32,
	Counter64,
	mib-2
		FROM SNMPv2-SMI		-- [RFC2578]
	TimeStamp,
	TruthValue
		FROM SNMPv2-TC		-- [RFC2579]
	MODULE-COMPLIANCE,
	OBJECT-GROUP
		FROM SNMPv2-CONF		-- [RFC2580]
	InetAddressType,
	InetAddress,
	InetPortNumber
		FROM INET-ADDRESS-MIB;

-- [RFC3291]

sctpMIB MODULE-IDENTITY
	LAST-UPDATED "200409020000Z"	-- Sep 2, 2004 12:00:00 AM
	ORGANIZATION "IETF SIGTRAN Working Group"
	CONTACT-INFO
		"
		WG EMail: sigtran@ietf.org

		Web Page:
		      http://www.ietf.org/html.charters/sigtran-charter.html

		Chair:     Lyndon Ong
		           Ciena Corporation
		           0480 Ridgeview Drive
		           Cupertino, CA  95014
		           USA
		           Tel:
		           Email: lyong@ciena.com

		Editors:   Maria-Carmen Belinchon
		           R&D Department
		           Ericsson Espana S. A.
		           Via de los Poblados, 13
		           28033 Madrid
		           Spain
		           Tel:   +34 91 339 3535
		           Email: Maria.C.Belinchon@ericsson.com

		           Jose-Javier Pastor-Balbas
		           R&D Department
		           Ericsson Espana S. A.
		           Via de los Poblados, 13
		           28033 Madrid
		           Spain
		           Tel:   +34 91 339 1397
		    Email: J.Javier.Pastor@ericsson.com

		"
	DESCRIPTION
		"The MIB module for managing SCTP implementations.

		Copyright (C) The Internet Society (2004).  This version of
		this MIB module is part of RFC 3873; see the RFC itself for
		full legal notices."
	REVISION "200409020000Z"	-- Sep 2, 2004 12:00:00 AM
	DESCRIPTION
		"Initial version, published as RFC 3873"
	-- 1.3.6.1.2.1.104
	::= { mib-2 104 }


-- the SCTP base variables group

sctpObjects OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.104.1
	::= { sctpMIB 1 }

sctpStats OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.104.1.1
	::= { sctpObjects 1 }

sctpParams OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.104.1.2
	::= { sctpObjects 2 }

-- STATISTICS
-- **********
-- STATE-RELATED STATISTICS

sctpCurrEstab OBJECT-TYPE
	SYNTAX  Gauge32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of associations for which the current state is
		either ESTABLISHED, SHUTDOWN-RECEIVED or SHUTDOWN-PENDING."
	REFERENCE
		"Section 4 in RFC2960 covers the SCTP   Association state
		diagram."
	-- 1.3.6.1.2.1.104.1.1.1
	::= { sctpStats 1 }


sctpActiveEstabs OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of times that associations have made a direct
		transition to the ESTABLISHED state from the COOKIE-ECHOED
		state: COOKIE-ECHOED -> ESTABLISHED. The upper layer initiated
		the association attempt."
	REFERENCE
		"Section 4 in RFC2960 covers the SCTP   Association state
		diagram."
	-- 1.3.6.1.2.1.104.1.1.2
	::= { sctpStats 2 }


sctpPassiveEstabs OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of times that associations have made a direct
		transition to the ESTABLISHED state from the CLOSED state:
		CLOSED -> ESTABLISHED. The remote endpoint initiated the
		association attempt."
	REFERENCE
		"Section 4 in RFC2960 covers the SCTP   Association state
		diagram."
	-- 1.3.6.1.2.1.104.1.1.3
	::= { sctpStats 3 }


sctpAborteds OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of times that associations have made a direct
		transition to the CLOSED state from any state using the
		primitive 'ABORT': AnyState --Abort--> CLOSED. Ungraceful
		termination of the association."
	REFERENCE
		"Section 4 in RFC2960 covers the SCTP   Association state
		diagram."
	-- 1.3.6.1.2.1.104.1.1.4
	::= { sctpStats 4 }


sctpShutdowns OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of times that associations have made a direct
		transition to the CLOSED state from either the SHUTDOWN-SENT
		state or the SHUTDOWN-ACK-SENT state. Graceful termination of
		the association."
	REFERENCE
		"Section 4 in RFC2960 covers the SCTP   Association state
		diagram."
	-- 1.3.6.1.2.1.104.1.1.5
	::= { sctpStats 5 }


-- OTHER LAYER STATISTICS

sctpOutOfBlues OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of out of the blue packets received by the host.
		An out of the blue packet is an SCTP packet correctly formed,
		including the proper checksum, but for which the receiver was
		unable to identify an appropriate association."
	REFERENCE
		"Section 8.4 in RFC2960 deals with the Out-Of-The-Blue
		(OOTB) packet definition and procedures."
	-- 1.3.6.1.2.1.104.1.1.6
	::= { sctpStats 6 }


sctpChecksumErrors OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of SCTP packets received with an invalid
		checksum."
	REFERENCE
		"The checksum is located at the end of the SCTP packet as per
		Section 3.1 in RFC2960. RFC3309 updates SCTP to use a 32 bit
		CRC checksum."
	-- 1.3.6.1.2.1.104.1.1.7
	::= { sctpStats 7 }


sctpOutCtrlChunks OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of SCTP control chunks sent (retransmissions are
		not included). Control chunks are those chunks different from
		DATA."
	REFERENCE
		"Sections 1.3.5 and 1.4 in RFC2960 refer to control chunk as
		those chunks different from those that contain user
		information, i.e., DATA chunks."
	-- 1.3.6.1.2.1.104.1.1.8
	::= { sctpStats 8 }


sctpOutOrderChunks OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of SCTP ordered data chunks sent (retransmissions
		are not included)."
	REFERENCE
		"Section 3.3.1 in RFC2960 defines the ordered data chunk."
	-- 1.3.6.1.2.1.104.1.1.9
	::= { sctpStats 9 }


sctpOutUnorderChunks OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of SCTP unordered chunks (data chunks in which the
		U bit is set to 1) sent (retransmissions are not included)."
	REFERENCE
		"Section 3.3.1 in RFC2960 defines the unordered data chunk."
	-- 1.3.6.1.2.1.104.1.1.10
	::= { sctpStats 10 }


sctpInCtrlChunks OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of SCTP control chunks received (no duplicate
		chunks included)."
	REFERENCE
		"Sections 1.3.5 and 1.4 in RFC2960 refer to control chunk as
		those chunks different from those that contain user
		information, i.e., DATA chunks."
	-- 1.3.6.1.2.1.104.1.1.11
	::= { sctpStats 11 }


sctpInOrderChunks OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of SCTP ordered data chunks received (no duplicate
		chunks included)."
	REFERENCE
		"Section 3.3.1 in RFC2960 defines the ordered data chunk."
	-- 1.3.6.1.2.1.104.1.1.12
	::= { sctpStats 12 }


sctpInUnorderChunks OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of SCTP unordered chunks (data chunks in which the
		U bit is set to 1) received (no duplicate chunks included)."
	REFERENCE
		"Section 3.3.1 in RFC2960 defines the unordered data chunk."
	-- 1.3.6.1.2.1.104.1.1.13
	::= { sctpStats 13 }


sctpFragUsrMsgs OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of user messages that have to be fragmented
		because of the MTU."
	-- 1.3.6.1.2.1.104.1.1.14
	::= { sctpStats 14 }


sctpReasmUsrMsgs OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of user messages reassembled, after conversion
		into DATA chunks."
	REFERENCE
		"Section 6.9 in RFC2960 includes a description of the
		reassembly process."
	-- 1.3.6.1.2.1.104.1.1.15
	::= { sctpStats 15 }


sctpOutSCTPPacks OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of SCTP packets sent. Retransmitted DATA chunks
		are included."
	-- 1.3.6.1.2.1.104.1.1.16
	::= { sctpStats 16 }


sctpInSCTPPacks OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of SCTP packets received. Duplicates are
		included."
	-- 1.3.6.1.2.1.104.1.1.17
	::= { sctpStats 17 }


sctpDiscontinuityTime OBJECT-TYPE
	SYNTAX  TimeStamp
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The value of sysUpTime on the most recent occasion at which
		any one or more of this general statistics counters suffered a
		discontinuity.  The relevant counters are the specific
		instances associated with this interface of any Counter32 or
		Counter64 object contained in the SCTP layer statistics
		(defined below sctpStats branch).  If no such discontinuities
		have occurred since the last re-initialization of the local
		management subsystem, then this object contains a zero value."
	REFERENCE
		"The inclusion of this object is recommended by RFC2578."
	-- 1.3.6.1.2.1.104.1.1.18
	::= { sctpStats 18 }


-- PROTOCOL GENERAL VARIABLES
-- **************************

sctpRtoAlgorithm OBJECT-TYPE
	SYNTAX  INTEGER {
			other(1), 	-- Other new one. Future use
			vanj(2)  	-- Van Jacobson's algorithm
			}
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The algorithm used to determine the timeout value (T3-rtx)
		used for re-transmitting unacknowledged chunks."
	REFERENCE
		"Section 6.3.1 and 6.3.2 in RFC2960 cover the RTO calculation
		and retransmission timer rules."
	DEFVAL { vanj }
	-- vanj(2)
	-- 1.3.6.1.2.1.104.1.2.1
	::= { sctpParams 1 }


sctpRtoMin OBJECT-TYPE
	SYNTAX  Unsigned32
	UNITS	"milliseconds"
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The minimum value permitted by a SCTP implementation for the
		retransmission timeout value, measured in milliseconds.  More
		refined semantics for objects of this type depend upon the
		algorithm used to determine the retransmission timeout value.

		A retransmission time value of zero means immediate
		retransmission.

		The value of this object has to be lower than or equal to
		stcpRtoMax's value."
	DEFVAL { 1000 }
	-- milliseconds
	-- 1.3.6.1.2.1.104.1.2.2
	::= { sctpParams 2 }


sctpRtoMax OBJECT-TYPE
	SYNTAX  Unsigned32
	UNITS	"milliseconds"
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The maximum value permitted by a SCTP implementation for the
		retransmission timeout value, measured in milliseconds.  More
		refined semantics for objects of this type depend upon the
		algorithm used to determine the retransmission timeout value.

		A retransmission time value of zero means immediate re-
		transmission.







		The value of this object has to be greater than or equal to
		stcpRtoMin's value."
	DEFVAL { 60000 }
	-- milliseconds
	-- 1.3.6.1.2.1.104.1.2.3
	::= { sctpParams 3 }


sctpRtoInitial OBJECT-TYPE
	SYNTAX  Unsigned32
	UNITS	"milliseconds"
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The initial value for the retransmission timer.

		A retransmission time value of zero means immediate re-
		transmission."
	DEFVAL { 3000 }
	-- milliseconds
	-- 1.3.6.1.2.1.104.1.2.4
	::= { sctpParams 4 }


sctpMaxAssocs OBJECT-TYPE
	SYNTAX  Integer32 (-1 | 0..2147483647)
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The limit on the total number of associations the entity can
		support. In entities where the maximum number of associations
		is dynamic, this object should contain the value -1."
	-- 1.3.6.1.2.1.104.1.2.5
	::= { sctpParams 5 }


sctpValCookieLife OBJECT-TYPE
	SYNTAX  Unsigned32
	UNITS	"milliseconds"
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Valid cookie life in the 4-way start-up handshake procedure."
	REFERENCE
		"Section 5.1.3 in RFC2960 explains the cookie generation
		process. Recommended value is per section 14 in RFC2960."
	DEFVAL { 60000 }
	-- milliseconds
	-- 1.3.6.1.2.1.104.1.2.6
	::= { sctpParams 6 }


sctpMaxInitRetr OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The maximum number of retransmissions at the start-up phase
		(INIT and COOKIE ECHO chunks)."
	REFERENCE
		"Section 5.1.4, 5.1.6 in RFC2960 refers to Max.Init.Retransmit
		parameter. Recommended value is per section 14 in RFC2960."
	DEFVAL { 8 }
	-- number of attempts
	-- 1.3.6.1.2.1.104.1.2.7
	::= { sctpParams 7 }


-- TABLES
-- ******
-- the SCTP Association TABLE
-- The SCTP association table contains information about each
-- association in which the local endpoint is involved.

sctpAssocTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SctpAssocEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"A table containing SCTP association-specific information."
	-- 1.3.6.1.2.1.104.1.3
	::= { sctpObjects 3 }


sctpAssocEntry OBJECT-TYPE
	SYNTAX  SctpAssocEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"General common variables and statistics for the whole
		association."
	INDEX {
		sctpAssocId }
	-- 1.3.6.1.2.1.104.1.3.1
	::= { sctpAssocTable 1 }


SctpAssocEntry ::= SEQUENCE {

	sctpAssocId                Unsigned32,
	sctpAssocRemHostName       OCTET STRING,
	sctpAssocLocalPort         InetPortNumber,
	sctpAssocRemPort           InetPortNumber,
	sctpAssocRemPrimAddrType   InetAddressType,
	sctpAssocRemPrimAddr       InetAddress,
	sctpAssocHeartBeatInterval Unsigned32,
	sctpAssocState             INTEGER,
	sctpAssocInStreams         Unsigned32,
	sctpAssocOutStreams        Unsigned32,
	sctpAssocMaxRetr           Unsigned32,
	sctpAssocPrimProcess       Unsigned32,
	sctpAssocT1expireds        Counter32,
	sctpAssocT2expireds        Counter32,
	sctpAssocRtxChunks         Counter32,
	sctpAssocStartTime         TimeStamp,
	sctpAssocDiscontinuityTime TimeStamp }


sctpAssocId OBJECT-TYPE
	SYNTAX  Unsigned32 (1..4294967295)
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Association Identification. Value identifying the
		association."
	-- 1.3.6.1.2.1.104.1.3.1.1
	::= { sctpAssocEntry 1 }


sctpAssocRemHostName OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE (0..255))
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The peer's DNS name. This object needs to have the same
		format as the encoding in the DNS protocol.  This implies that
		the domain name can be up to 255 octets long, each octet being
		0<=x<=255 as value with US-ASCII A-Z having a case insensitive
		matching.

		If no DNS domain name was received from the peer at init time
		(embedded in the INIT or INIT-ACK chunk), this object is
		meaningless. In such cases the object MUST contain a zero-
		length string value. Otherwise, it contains the remote host
		name received at init time."
	-- 1.3.6.1.2.1.104.1.3.1.2
	::= { sctpAssocEntry 2 }


sctpAssocLocalPort OBJECT-TYPE
	SYNTAX  InetPortNumber (1..65535)
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The local SCTP port number used for this association."
	-- 1.3.6.1.2.1.104.1.3.1.3
	::= { sctpAssocEntry 3 }


sctpAssocRemPort OBJECT-TYPE
	SYNTAX  InetPortNumber (1..65535)
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The remote SCTP port number used for this association."
	-- 1.3.6.1.2.1.104.1.3.1.4
	::= { sctpAssocEntry 4 }


sctpAssocRemPrimAddrType OBJECT-TYPE
	SYNTAX  InetAddressType
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The internet type of primary remote IP address."
	-- 1.3.6.1.2.1.104.1.3.1.5
	::= { sctpAssocEntry 5 }


sctpAssocRemPrimAddr OBJECT-TYPE
	SYNTAX  InetAddress
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The primary remote IP address. The type of this address is
		determined by the value of sctpAssocRemPrimAddrType.

		The client side will know this value after INIT_ACK message
		reception, the server side will know this value when sending
		INIT_ACK message. However, values will be filled in at
		established(4) state."
	-- 1.3.6.1.2.1.104.1.3.1.6
	::= { sctpAssocEntry 6 }


sctpAssocHeartBeatInterval OBJECT-TYPE
	SYNTAX  Unsigned32
	UNITS	"milliseconds"
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The current heartbeat interval..

		Zero value means no HeartBeat, even when the concerned
		sctpAssocRemAddrHBFlag object is true."
	DEFVAL { 30000 }
	-- milliseconds
	-- 1.3.6.1.2.1.104.1.3.1.7
	::= { sctpAssocEntry 7 }


sctpAssocState OBJECT-TYPE
	SYNTAX  INTEGER {
			closed(1),
			cookieWait(2),
			cookieEchoed(3),
			established(4),
			shutdownPending(5),
			shutdownSent(6),
			shutdownReceived(7),
			shutdownAckSent(8),
			deleteTCB(9) }
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"The state of this SCTP association.

		As in TCP, deleteTCB(9) is the only value that may be set by a
		management station. If any other value is received, then the
		agent must return a wrongValue error.

		If a management station sets this object to the value
		deleteTCB(9), then this has the effect of deleting the TCB (as
		defined in SCTP) of the corresponding association on the
		managed node, resulting in immediate termination of the
		association.

		As an implementation-specific option, an ABORT chunk may be
		sent from the managed node to the other SCTP endpoint as a
		result of setting the deleteTCB(9) value. The ABORT chunk
		implies an ungraceful association shutdown."
	REFERENCE
		"Section 4 in RFC2960 covers the SCTP Association state
		diagram."
	-- 1.3.6.1.2.1.104.1.3.1.8
	::= { sctpAssocEntry 8 }


sctpAssocInStreams OBJECT-TYPE
	SYNTAX  Unsigned32 (1..65535)
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Inbound Streams according to the negotiation at association
		start up."
	REFERENCE
		"Section 1.3 in RFC2960 includes a definition of stream.
		Section 5.1.1 in RFC2960 covers the streams negotiation
		process."
	-- 1.3.6.1.2.1.104.1.3.1.9
	::= { sctpAssocEntry 9 }


sctpAssocOutStreams OBJECT-TYPE
	SYNTAX  Unsigned32 (1..65535)
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Outbound Streams according to the negotiation at association
		start up."
	REFERENCE
		"Section 1.3 in RFC2960 includes a definition of stream.
		Section 5.1.1 in RFC2960 covers the streams negotiation
		process."
	-- 1.3.6.1.2.1.104.1.3.1.10
	::= { sctpAssocEntry 10 }


sctpAssocMaxRetr OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The maximum number of data retransmissions in the association
		context. This value is specific for each association and the
		upper layer can change it by calling the appropriate
		primitives. This value has to be smaller than the addition of
		all the maximum number for all the paths
		(sctpAssocRemAddrMaxPathRtx).





		A value of zero value means no retransmissions."
	DEFVAL { 10 }
	-- number of attempts
	-- 1.3.6.1.2.1.104.1.3.1.11
	::= { sctpAssocEntry 11 }


sctpAssocPrimProcess OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"This object identifies the system level process which holds
		primary responsibility for the SCTP association.
		Wherever possible, this should be the system's native unique
		identification number. The special value 0 can be used to
		indicate that no primary process is known.

		Note that the value of this object can be used as a pointer
		into the swRunTable of the HOST-RESOURCES-MIB(if the value is
		smaller than 2147483647) or into the sysApplElmtRunTable of
		the SYSAPPL-MIB."
	-- 1.3.6.1.2.1.104.1.3.1.12
	::= { sctpAssocEntry 12 }


-- Association Statistics

sctpAssocT1expireds OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The T1 timer determines how long to wait for an
		acknowledgement after sending an INIT or COOKIE-ECHO chunk.
		This object reflects the number of times the T1 timer expires
		without having received the acknowledgement.

		Discontinuities in the value of this counter can occur at re-
		initialization of the management system, and at other times as
		indicated by the value of sctpAssocDiscontinuityTime."
	REFERENCE
		"Section 5 in RFC2960."
	-- 1.3.6.1.2.1.104.1.3.1.13
	::= { sctpAssocEntry 13 }


sctpAssocT2expireds OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The T2 timer determines how long to wait for an
		acknowledgement after sending a SHUTDOWN or SHUTDOWN-ACK
		chunk. This object reflects the number of times that T2- timer
		expired.

		Discontinuities in the value of this counter can occur at re-
		initialization of the management system, and at other times as
		indicated by the value of sctpAssocDiscontinuityTime."
	REFERENCE
		"Section 9.2 in RFC2960."
	-- 1.3.6.1.2.1.104.1.3.1.14
	::= { sctpAssocEntry 14 }


sctpAssocRtxChunks OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"When T3-rtx expires, the DATA chunks that triggered the T3
		timer will be re-sent according with the retransmissions
		rules. Every DATA chunk that was included in the SCTP packet
		that triggered the T3-rtx timer must be added to the value of
		this counter.

		Discontinuities in the value of this counter can occur at re-
		initialization of the management system, and at other times as
		indicated by the value of sctpAssocDiscontinuityTime."
	REFERENCE
		"Section 6 in RFC2960 covers the retransmission process and
		rules."
	-- 1.3.6.1.2.1.104.1.3.1.15
	::= { sctpAssocEntry 15 }


sctpAssocStartTime OBJECT-TYPE
	SYNTAX  TimeStamp
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The value of sysUpTime at the time that the association
		represented by this row enters the ESTABLISHED state, i.e.,
		the sctpAssocState object is set to established(4). The
		value of this object will be zero:
		- before the association enters the established(4)
		  state, or






		- if the established(4) state was entered prior to
		  the last re-initialization of the local network management
		  subsystem."
	-- 1.3.6.1.2.1.104.1.3.1.16
	::= { sctpAssocEntry 16 }


sctpAssocDiscontinuityTime OBJECT-TYPE
	SYNTAX  TimeStamp
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The value of sysUpTime on the most recent occasion at which
		any one or more of this SCTP association counters suffered a
		discontinuity.  The relevant counters are the specific
		instances associated with this interface of any Counter32 or
		Counter64 object contained in the sctpAssocTable or
		sctpLocalAddrTable or sctpRemAddrTable.  If no such
		discontinuities have occurred since the last re-initialization
		of the local management subsystem, then this object contains a
		zero value."
	REFERENCE
		"The inclusion of this object is recommended by RFC2578."
	-- 1.3.6.1.2.1.104.1.3.1.17
	::= { sctpAssocEntry 17 }


-- Expanded tables: Including Multi-home feature
-- Local Address TABLE
-- *******************

sctpAssocLocalAddrTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SctpAssocLocalAddrEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Expanded table of sctpAssocTable based on the AssocId index.
		This table shows data related to each local IP address which
		is used by this association."
	-- 1.3.6.1.2.1.104.1.4
	::= { sctpObjects 4 }


sctpAssocLocalAddrEntry OBJECT-TYPE
	SYNTAX  SctpAssocLocalAddrEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Local information about the available addresses. There will
		be an entry for every local IP address defined for this





		association.
		Implementors need to be aware that if the size of
		sctpAssocLocalAddr exceeds 114 octets then OIDs of column
		instances in this table will have more than 128 sub-
		identifiers and cannot be accessed using SNMPv1, SNMPv2c, or
		SNMPv3."
	INDEX {
		sctpAssocId,
		sctpAssocLocalAddrType,
		sctpAssocLocalAddr }
	-- 1.3.6.1.2.1.104.1.4.1
	::= { sctpAssocLocalAddrTable 1 }


SctpAssocLocalAddrEntry ::= SEQUENCE {

	sctpAssocLocalAddrType      InetAddressType,
	sctpAssocLocalAddr          InetAddress,
	sctpAssocLocalAddrStartTime TimeStamp }


sctpAssocLocalAddrType OBJECT-TYPE
	SYNTAX  InetAddressType
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Internet type of local IP address used for this association."
	-- 1.3.6.1.2.1.104.1.4.1.1
	::= { sctpAssocLocalAddrEntry 1 }


sctpAssocLocalAddr OBJECT-TYPE
	SYNTAX  InetAddress
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The value of a local IP address available for this
		association. The type of this address is determined by the
		value of sctpAssocLocalAddrType."
	-- 1.3.6.1.2.1.104.1.4.1.2
	::= { sctpAssocLocalAddrEntry 2 }


sctpAssocLocalAddrStartTime OBJECT-TYPE
	SYNTAX  TimeStamp
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The value of sysUpTime at the time that this row was
		created."
	-- 1.3.6.1.2.1.104.1.4.1.3
	::= { sctpAssocLocalAddrEntry 3 }


-- Remote Addresses TABLE
-- **********************

sctpAssocRemAddrTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SctpAssocRemAddrEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Expanded table of sctpAssocTable based on the AssocId index.
		This table shows data related to each remote peer IP address
		which is used by this association."
	-- 1.3.6.1.2.1.104.1.5
	::= { sctpObjects 5 }


sctpAssocRemAddrEntry OBJECT-TYPE
	SYNTAX  SctpAssocRemAddrEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Information about the most important variables for every
		remote IP address. There will be an entry for every remote IP
		address defined for this association.

		Implementors need to be aware that if the size of
		sctpAssocRemAddr exceeds 114 octets then OIDs of column
		instances in this table will have more than 128 sub-
		identifiers and cannot be accessed using SNMPv1, SNMPv2c, or
		SNMPv3."
	INDEX {
		sctpAssocId,
		sctpAssocRemAddrType,
		sctpAssocRemAddr }
	-- 1.3.6.1.2.1.104.1.5.1
	::= { sctpAssocRemAddrTable 1 }


SctpAssocRemAddrEntry ::= SEQUENCE {

	sctpAssocRemAddrType       InetAddressType,
	sctpAssocRemAddr           InetAddress,
	sctpAssocRemAddrActive     TruthValue,
	sctpAssocRemAddrHBActive   TruthValue,
	sctpAssocRemAddrRTO        Unsigned32,
	sctpAssocRemAddrMaxPathRtx Unsigned32,
	sctpAssocRemAddrRtx        Counter32,
	sctpAssocRemAddrStartTime  TimeStamp }


sctpAssocRemAddrType OBJECT-TYPE
	SYNTAX  InetAddressType
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Internet type of a remote IP address available for this
		association."
	-- 1.3.6.1.2.1.104.1.5.1.1
	::= { sctpAssocRemAddrEntry 1 }


sctpAssocRemAddr OBJECT-TYPE
	SYNTAX  InetAddress
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The value of a remote IP address available for this
		association. The type of this address is determined by the
		value of sctpAssocLocalAddrType."
	-- 1.3.6.1.2.1.104.1.5.1.2
	::= { sctpAssocRemAddrEntry 2 }


sctpAssocRemAddrActive OBJECT-TYPE
	SYNTAX  TruthValue
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"This object gives information about the reachability of this
		specific remote IP address.

		When the object is set to 'true' (1), the remote IP address is
		understood as Active. Active means that the threshold of no
		answers received from this IP address has not been reached.








		When the object is set to 'false' (2), the remote IP address
		is understood as Inactive. Inactive means that either no
		heartbeat or any other message was received from this address,
		reaching the threshold defined by the protocol."
	REFERENCE
		"The remote transport states are defined as Active and
		Inactive in the SCTP, RFC2960."
	-- 1.3.6.1.2.1.104.1.5.1.3
	::= { sctpAssocRemAddrEntry 3 }


sctpAssocRemAddrHBActive OBJECT-TYPE
	SYNTAX  TruthValue
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"This object indicates whether the optional Heartbeat check
		associated to one destination transport address is activated
		or not (value equal to true or false, respectively)."
	-- 1.3.6.1.2.1.104.1.5.1.4
	::= { sctpAssocRemAddrEntry 4 }


sctpAssocRemAddrRTO OBJECT-TYPE
	SYNTAX  Unsigned32
	UNITS	"milliseconds"
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The current Retransmission Timeout. T3-rtx timer as defined
		in the protocol SCTP."
	REFERENCE
		"Section 6.3 in RFC2960 deals with the Retransmission Timer
		Management."
	-- 1.3.6.1.2.1.104.1.5.1.5
	::= { sctpAssocRemAddrEntry 5 }


sctpAssocRemAddrMaxPathRtx OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Maximum number of DATA chunks retransmissions allowed to a
		remote IP address before it is considered inactive, as defined
		in RFC2960."
	REFERENCE
		"Section 8.2, 8.3 and 14 in RFC2960."
	DEFVAL { 5 }
	-- number of attempts
	-- 1.3.6.1.2.1.104.1.5.1.6
	::= { sctpAssocRemAddrEntry 6 }


-- Remote Address Statistic

sctpAssocRemAddrRtx OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of DATA chunks retransmissions to this specific IP
		address. When T3-rtx expires, the DATA chunk that triggered
		the T3 timer will be re-sent according to the retransmissions
		rules. Every DATA chunk that is included in a SCTP packet and
		was transmitted to this specific IP address before, will be
		included in this counter.

		Discontinuities in the value of this counter can occur at re-
		initialization of the management system, and at other times as
		indicated by the value of sctpAssocDiscontinuityTime."
	-- 1.3.6.1.2.1.104.1.5.1.7
	::= { sctpAssocRemAddrEntry 7 }


sctpAssocRemAddrStartTime OBJECT-TYPE
	SYNTAX  TimeStamp
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The value of sysUpTime at the time that this row was
		created."
	-- 1.3.6.1.2.1.104.1.5.1.8
	::= { sctpAssocRemAddrEntry 8 }


-- ASSOCIATION INVERSE TABLE
-- *************************
-- BY LOCAL PORT

sctpLookupLocalPortTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SctpLookupLocalPortEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"With the use of this table, a list of associations which are





		using the specified local port can be retrieved."
	-- 1.3.6.1.2.1.104.1.6
	::= { sctpObjects 6 }


sctpLookupLocalPortEntry OBJECT-TYPE
	SYNTAX  SctpLookupLocalPortEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"This table is indexed by local port and association ID.
		Specifying a local port, we would get a list of the
		associations whose local port is the one specified."
	INDEX {
		sctpAssocLocalPort,
		sctpAssocId }
	-- 1.3.6.1.2.1.104.1.6.1
	::= { sctpLookupLocalPortTable 1 }


SctpLookupLocalPortEntry ::= SEQUENCE {

	sctpLookupLocalPortStartTime TimeStamp }


sctpLookupLocalPortStartTime OBJECT-TYPE
	SYNTAX  TimeStamp
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The value of sysUpTime at the time that this row was created.

		As the table will be created after the sctpAssocTable
		creation, this value could be equal to the sctpAssocStartTime
		object from the main table."
	-- 1.3.6.1.2.1.104.1.6.1.1
	::= { sctpLookupLocalPortEntry 1 }


-- BY REMOTE PORT

sctpLookupRemPortTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SctpLookupRemPortEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"With the use of this table, a list of associations which are
		using the specified remote port can be got"
	-- 1.3.6.1.2.1.104.1.7
	::= { sctpObjects 7 }


sctpLookupRemPortEntry OBJECT-TYPE
	SYNTAX  SctpLookupRemPortEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"This table is indexed by remote port and association ID.
		Specifying a remote port we would get a list of the
		associations whose local port is the one specified"
	INDEX {
		sctpAssocRemPort,
		sctpAssocId }
	-- 1.3.6.1.2.1.104.1.7.1
	::= { sctpLookupRemPortTable 1 }


SctpLookupRemPortEntry ::= SEQUENCE {

	sctpLookupRemPortStartTime TimeStamp }


sctpLookupRemPortStartTime OBJECT-TYPE
	SYNTAX  TimeStamp
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The value of sysUpTime at the time that this row was created.

		As the table will be created after the sctpAssocTable
		creation, this value could be equal to the sctpAssocStartTime
		object from the main table."
	-- 1.3.6.1.2.1.104.1.7.1.1
	::= { sctpLookupRemPortEntry 1 }


-- BY REMOTE HOST NAME

sctpLookupRemHostNameTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SctpLookupRemHostNameEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"With the use of this table, a list of associations with that
		particular host can be retrieved."
	-- 1.3.6.1.2.1.104.1.8
	::= { sctpObjects 8 }


sctpLookupRemHostNameEntry OBJECT-TYPE
	SYNTAX  SctpLookupRemHostNameEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"This table is indexed by remote host name and association ID.
		Specifying a host name we would get a list of the associations
		specifying that host name as the remote one.

		Implementors need to be aware that if the size of
		sctpAssocRemHostName exceeds 115 octets then OIDs of column
		instances in this table will have more than 128 sub-
		identifiers and cannot be accessed using SNMPv1, SNMPv2c, or
		SNMPv3."
	INDEX {
		sctpAssocRemHostName,
		sctpAssocId }
	-- 1.3.6.1.2.1.104.1.8.1
	::= { sctpLookupRemHostNameTable 1 }


SctpLookupRemHostNameEntry ::= SEQUENCE {

	sctpLookupRemHostNameStartTime TimeStamp }


sctpLookupRemHostNameStartTime OBJECT-TYPE
	SYNTAX  TimeStamp
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The value of sysUpTime at the time that this row was created.

		As the table will be created after the sctpAssocTable
		creation, this value could be equal to the sctpAssocStartTime
		object from the main table."
	-- 1.3.6.1.2.1.104.1.8.1.1
	::= { sctpLookupRemHostNameEntry 1 }


-- BY REMOTE PRIMARY IP ADDRESS

sctpLookupRemPrimIPAddrTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SctpLookupRemPrimIPAddrEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"With the use of this table, a list of associations that have
		the specified IP address as primary within the remote set of
		active addresses can be retrieved."
	-- 1.3.6.1.2.1.104.1.9
	::= { sctpObjects 9 }


sctpLookupRemPrimIPAddrEntry OBJECT-TYPE
	SYNTAX  SctpLookupRemPrimIPAddrEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"This table is indexed by primary address and association ID.
		Specifying a primary address, we would get a list of the
		associations that have the specified remote IP address marked
		as primary.
		Implementors need to be aware that if the size of
		sctpAssocRemPrimAddr exceeds 114 octets then OIDs of column
		instances in this table will have more than 128 sub-
		identifiers and cannot be accessed using SNMPv1, SNMPv2c, or
		SNMPv3."
	INDEX {
		sctpAssocRemPrimAddrType,
		sctpAssocRemPrimAddr,
		sctpAssocId }
	-- 1.3.6.1.2.1.104.1.9.1
	::= { sctpLookupRemPrimIPAddrTable 1 }


SctpLookupRemPrimIPAddrEntry ::= SEQUENCE {

	sctpLookupRemPrimIPAddrStartTime TimeStamp }


sctpLookupRemPrimIPAddrStartTime OBJECT-TYPE
	SYNTAX  TimeStamp
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The value of SysUpTime at the time that this row was created.

		As the table will be created after the sctpAssocTable
		creation, this value could be equal to the sctpAssocStartTime
		object from the main table."
	-- 1.3.6.1.2.1.104.1.9.1.1
	::= { sctpLookupRemPrimIPAddrEntry 1 }


-- BY REMOTE IP ADDRESS

sctpLookupRemIPAddrTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SctpLookupRemIPAddrEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"With the use of this table, a list of associations that have
		the specified IP address as one of the remote ones can be
		retrieved."
	-- 1.3.6.1.2.1.104.1.10
	::= { sctpObjects 10 }


sctpLookupRemIPAddrEntry OBJECT-TYPE
	SYNTAX  SctpLookupRemIPAddrEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"This table is indexed by a remote IP address and association
		ID. Specifying an IP address we would get a list of the
		associations that have the specified IP address included
		within the set of remote IP addresses."
	INDEX {
		sctpAssocRemAddrType,
		sctpAssocRemAddr,
		sctpAssocId }
	-- 1.3.6.1.2.1.104.1.10.1
	::= { sctpLookupRemIPAddrTable 1 }


SctpLookupRemIPAddrEntry ::= SEQUENCE {

	sctpLookupRemIPAddrStartTime TimeStamp }


sctpLookupRemIPAddrStartTime OBJECT-TYPE
	SYNTAX  TimeStamp
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The value of SysUpTime at the time that this row was created.

		As the table will be created after the sctpAssocTable
		creation, this value could be equal to the sctpAssocStartTime
		object from the main table."
	-- 1.3.6.1.2.1.104.1.10.1.1
	::= { sctpLookupRemIPAddrEntry 1 }


-- 4.1 Conformance Information

sctpMibConformance OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.104.2
	::= { sctpMIB 2 }

sctpMibCompliances OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.104.2.1
	::= { sctpMibConformance 1 }

sctpMibGroups OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.104.2.2
	::= { sctpMibConformance 2 }

-- 4.1.1 Units of conformance
--
-- MODULE GROUPS
--

sctpLayerParamsGroup OBJECT-GROUP
	OBJECTS {
		sctpRtoAlgorithm,
		sctpRtoMin,
		sctpRtoMax,
		sctpRtoInitial,
		sctpMaxAssocs,
		sctpValCookieLife,
		sctpMaxInitRetr }
	STATUS  current
	DESCRIPTION
		"Common parameters for the SCTP layer, i.e., for all the
		associations. They can usually be referred to as configuration
		parameters."
	-- 1.3.6.1.2.1.104.2.2.1
	::= { sctpMibGroups 1 }

sctpStatsGroup OBJECT-GROUP
	OBJECTS {
		sctpCurrEstab,
		sctpActiveEstabs,
		sctpPassiveEstabs,
		sctpAborteds,
		sctpShutdowns,
		sctpOutOfBlues,
		sctpChecksumErrors,
		sctpOutCtrlChunks,
		sctpOutOrderChunks,
		sctpOutUnorderChunks,
		sctpInCtrlChunks,
		sctpInOrderChunks,
		sctpInUnorderChunks,
		sctpFragUsrMsgs,
		sctpReasmUsrMsgs,
		sctpOutSCTPPacks,
		sctpInSCTPPacks,
		sctpDiscontinuityTime,
		sctpAssocT1expireds,
		sctpAssocT2expireds,
		sctpAssocRtxChunks,
		sctpAssocRemAddrRtx }
	STATUS  current
	DESCRIPTION
		"Statistics group. It includes the objects to collect state
		changes in the SCTP protocol local layer and flow control
		statistics."
	-- 1.3.6.1.2.1.104.2.2.2
	::= { sctpMibGroups 2 }

sctpPerAssocParamsGroup OBJECT-GROUP
	OBJECTS {
		sctpAssocRemHostName,
		sctpAssocLocalPort,
		sctpAssocRemPort,
		sctpAssocRemPrimAddrType,
		sctpAssocRemPrimAddr,
		sctpAssocHeartBeatInterval,
		sctpAssocState,
		sctpAssocInStreams,
		sctpAssocOutStreams,
		sctpAssocMaxRetr,
		sctpAssocPrimProcess,
		sctpAssocStartTime,
		sctpAssocDiscontinuityTime,
		sctpAssocLocalAddrStartTime,
		sctpAssocRemAddrActive,
		sctpAssocRemAddrHBActive,
		sctpAssocRemAddrRTO,
		sctpAssocRemAddrMaxPathRtx,
		sctpAssocRemAddrStartTime }
	STATUS  current
	DESCRIPTION
		"The SCTP group of objects to manage per-association
		parameters. These variables include all the SCTP basic
		features."
	-- 1.3.6.1.2.1.104.2.2.3
	::= { sctpMibGroups 3 }

sctpPerAssocStatsGroup OBJECT-GROUP
	OBJECTS {
		sctpAssocT1expireds,
		sctpAssocT2expireds,
		sctpAssocRtxChunks,
		sctpAssocRemAddrRtx }
	STATUS  current
	DESCRIPTION
		"Per Association Statistics group. It includes the objects to
		collect flow control statistics per association."
	-- 1.3.6.1.2.1.104.2.2.4
	::= { sctpMibGroups 4 }

sctpInverseGroup OBJECT-GROUP
	OBJECTS {
		sctpLookupLocalPortStartTime,
		sctpLookupRemPortStartTime,
		sctpLookupRemHostNameStartTime,
		sctpLookupRemPrimIPAddrStartTime,
		sctpLookupRemIPAddrStartTime }
	STATUS  current
	DESCRIPTION
		"Objects used in the inverse lookup tables."
	-- 1.3.6.1.2.1.104.2.2.5
	::= { sctpMibGroups 5 }


-- 4.1.2 Compliance Statements
--
-- MODULE COMPLIANCES
--

sctpMibCompliance MODULE-COMPLIANCE
	STATUS  current
	DESCRIPTION
		"The compliance statement for SNMP entities which implement
		       this SCTP MIB Module.

		       There are a number of INDEX objects that cannot be represented
		       in the form of OBJECT clauses in SMIv2, but for which we have
		       the following compliance requirements, expressed in OBJECT
		       clause form in this description clause:

		-- OBJECT        sctpAssocLocalAddrType
		-- SYNTAX        InetAddressType {ipv4(1), ipv6(2)}
		-- DESCRIPTION
		--       It is only required to have IPv4 and IPv6 addresses without
		--       zone indices.
		--       The address with zone indices is required if an
		--       implementation can connect multiple zones.
		--
		-- OBJECT        sctpAssocLocalAddr
		-- SYNTAX        InetAddress (SIZE(4|16))
		-- DESCRIPTION
		--       An implementation is only required to support globally
		--       unique IPv4 and IPv6 addresses.
		--
		-- OBJECT        sctpAssocRemAddrType
		-- SYNTAX        InetAddressType {ipv4(1), ipv6(2)}
		-- DESCRIPTION
		--       It is only required to have IPv4 and IPv6 addresses without
		--       zone indices.
		--       The address with zone indices is required if an
		--       implementation can connect multiple zones.
		--
		-- OBJECT        sctpAssocRemAddr
		-- SYNTAX        InetAddress (SIZE(4|16))
		-- DESCRIPTION
		--       An implementation is only required to support globally
		--       unique IPv4 and IPv6 addresses.
		--

		"

	MODULE 
	MANDATORY-GROUPS {
			sctpLayerParamsGroup,
			sctpPerAssocParamsGroup,
			sctpStatsGroup,
			sctpPerAssocStatsGroup }

	OBJECT sctpAssocRemPrimAddrType
	  SYNTAX InetAddressType {
			ipv4(1),
			ipv6(2) }
	  DESCRIPTION 
		"It is only required to have IPv4 and IPv6 addresses
		without zone indices.

		The address with zone indices is required if an
		implementation can connect multiple zones."
	OBJECT sctpAssocRemPrimAddr
	  SYNTAX InetAddress (SIZE (4 | 16))
	  DESCRIPTION 
		"An implementation is only required to support globally
		unique IPv4 and globally unique IPv6 addresses."
	OBJECT sctpAssocState
	  WRITE-SYNTAX INTEGER {
			deleteTCB(9) }
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Only the deleteTCB(9) value MAY be set by a management
		station at most. A read-only option is also considered to
		be compliant with this MIB module description."
	GROUP sctpInverseGroup
	  DESCRIPTION
		"Objects used in inverse lookup tables. This should be
		implemented, at the discretion of the implementers, for
		easier lookups in the association tables"
	-- 1.3.6.1.2.1.104.2.1.1
	::= { sctpMibCompliances 1 }

END
