PW-ATM-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY,
	OBJECT-TYPE,
	Counter32,
	Unsigned32,
	mib-2
		FROM SNMPv2-SMI
	MODULE-COMPLIANCE,
	OBJECT-GROUP
		FROM SNMPv2-CONF
	TruthValue,
	RowStatus,
	RowPointer
		FROM SNMPv2-TC
	PerfCurrentCount,
	PerfIntervalCount
		FROM PerfHist-TC-MIB
	InterfaceIndex
		FROM IF-MIB
	pwIndex
		FROM PW-STD-MIB
	AtmVpIdentifier,
	AtmVcIdentifier
		FROM ATM-TC-MIB;

pwAtmMIB MODULE-IDENTITY
	LAST-UPDATED "200906160000Z"	-- Jun 16, 2009 12:00:00 AM
	ORGANIZATION "Pseudowire Emulation Edge-to-Edge (PWE3)
Working Group"
	CONTACT-INFO
		"Thomas D. Nadeau
		Postal: BT
		        BT Centre
		        81 Newgate Street
		        London  EC1A 7AJ
		        United Kingdom





		Email:  tom.nadeau@bt.com

		Orly Nicklass
		Postal: RADVISION Ltd.
		       24 Raul Wallenberg
		       Tel Aviv, Israel
		Email: orlyn@radvision.com

		Discussion and general questions should be posed to
		the PWE3 Working Group (pwe3@ietf.org)."
	DESCRIPTION
		"This MIB contains managed object definitions for
		pseudowire emulation of ATM over Packet Switched
		Networks (PSNs).

		This MIB supplements the PW-STD-MIB module.
		The PW-STD-MIB contains structures and MIB associations
		generic to pseudowire (PW) emulation.  PW-specific
		MIBs (such as this) contain config and stats for specific
		PW types.

		Copyright (c) 2009 IETF Trust and the persons identified as
		authors of the code.  All rights reserved.

		Redistribution and use in source and binary forms, with or
		without modification, are permitted provided that the
		following conditions are met:

		- Redistributions of source code must retain the above
		  copyright notice, this list of conditions and the
		  following disclaimer.

		- Redistributions in binary form must reproduce the above
		  copyright notice, this list of conditions and the
		  following disclaimer in the documentation and/or other
		  materials provided with the distribution.

		- Neither the name of Internet Society, IETF or IETF Trust,
		  nor the names of specific contributors, may be used to
		  endorse or promote products derived from this software
		  without specific prior written permission.

		THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
		CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES,
		INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
		MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
		DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR





		CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
		SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
		NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
		LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
		HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
		CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
		OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
		SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

		This version of this MIB module is part of RFC 5605;
		see the RFC itself for full legal notices.

		"
	REVISION "200906160000Z"	-- Jun 16, 2009 12:00:00 AM
	DESCRIPTION
		"Initial version published as RFC 5605."
	-- 1.3.6.1.2.1.183
	::= { mib-2 183 }


-- Top-level components of this MIB

pwAtmNotifications OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.183.0
	::= { pwAtmMIB 0 }

pwAtmObjects OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.183.1
	::= { pwAtmMIB 1 }

pwAtmConformance OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.183.2
	::= { pwAtmMIB 2 }

-- ATM PW PSN Bound(Outbound) Table for 1 to 1 connection

pwAtmOutboundTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF PwAtmOutboundEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"This table specifies the information for an ATM PW to
		be carried over the PSN in the outbound direction.  An
		entry is created in this table for every entry in
		the pwTable with a pwType equal to one of the following:
		atmAal5SduVcc(2), atmCell1to1Vcc(12), atmCell1to1Vpc(13)
		or atmAal5PduVcc(14), or atmTransparent(3)."
	-- 1.3.6.1.2.1.183.1.1
	::= { pwAtmObjects 1 }


pwAtmOutboundEntry OBJECT-TYPE
	SYNTAX  PwAtmOutboundEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"A row in this table represents an ATM PW that needs to be
		adapted and carried over the PSN.  This table is indexed by





		pwIndex from pwTable.  Unless otherwise specified, all
		writeable objects in this table MUST NOT be changed after
		row activation in the generic pwTable, and values must
		persist after reboot."
	REFERENCE
		"See [PWMIB]."
	INDEX {
		pwIndex }
	-- 1.3.6.1.2.1.183.1.1.1
	::= { pwAtmOutboundTable 1 }


PwAtmOutboundEntry ::= SEQUENCE {

	pwAtmOutboundAtmIf             InterfaceIndex,
	pwAtmOutboundVpi               AtmVpIdentifier,
	pwAtmOutboundVci               AtmVcIdentifier,
	pwAtmOutboundTrafficParamDescr RowPointer,
	pwAtmOutboundRowStatus         RowStatus }


pwAtmOutboundAtmIf OBJECT-TYPE
	SYNTAX  InterfaceIndex
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The ATM Interface that receives cells from the ATM
		network."
	-- 1.3.6.1.2.1.183.1.1.1.1
	::= { pwAtmOutboundEntry 1 }


pwAtmOutboundVpi OBJECT-TYPE
	SYNTAX  AtmVpIdentifier
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"VPI value of this ATM PW.  The value may indicate the
		translated value when egress generates new VPI."
	-- 1.3.6.1.2.1.183.1.1.1.2
	::= { pwAtmOutboundEntry 2 }


pwAtmOutboundVci OBJECT-TYPE
	SYNTAX  AtmVcIdentifier
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"VCI value of this ATM PW.  The value may indicate the
		translated value when egress generates new VCI."
	-- 1.3.6.1.2.1.183.1.1.1.3
	::= { pwAtmOutboundEntry 3 }


pwAtmOutboundTrafficParamDescr OBJECT-TYPE
	SYNTAX  RowPointer
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"This object represents a pointer to an ATM
		traffic-parameter-specific row in either a private or
		standard table that will be employed while receiving
		cells from the ATM network.  This row should contain a
		set of self-consistent ATM traffic parameters including
		the ATM traffic service category.
		A value of 0.0 indicates Best Effort."
	-- 1.3.6.1.2.1.183.1.1.1.4
	::= { pwAtmOutboundEntry 4 }


pwAtmOutboundRowStatus OBJECT-TYPE
	SYNTAX  RowStatus
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"This object is used to create, modify, or delete a row in
		this table.  Unless otherwise specified, all writeable
		objects in this table MUST NOT be changed after row
		activation as explained in the pwAtmOutboundEntry."
	-- 1.3.6.1.2.1.183.1.1.1.5
	::= { pwAtmOutboundEntry 5 }


-- End of ATM PW Outbound Table
-- ATM PW CE Bound(Inbound) Table for 1 to 1 mode

pwAtmInboundTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF PwAtmInboundEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"This table specifies the information for an ATM PW in the
		inbound direction."
	-- 1.3.6.1.2.1.183.1.3
	::= { pwAtmObjects 3 }


pwAtmInboundEntry OBJECT-TYPE
	SYNTAX  PwAtmInboundEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"A row in this table represents an ATM PW that needs to be
		sent into the ATM network after reconstructing cells from
		packets received from a PSN.  This table is indexed by
		pwIndex from pwTable.  An entry is created in this table
		for every entry in the pwTable with a
		pwType equal to one of the following:
		atmAal5SduVcc(2), atmCell1to1Vcc(12), atmCell1to1Vpc(13),
		atmAal5PduVcc(14), or atmTransparent(3).  Unless otherwise





		specified, all writeable objects in this table MUST NOT
		be changed after row activation in the generic pwTable,
		and values must persist after reboot."
	REFERENCE
		"See [PWMIB]."
	INDEX {
		pwIndex }
	-- 1.3.6.1.2.1.183.1.3.1
	::= { pwAtmInboundTable 1 }


PwAtmInboundEntry ::= SEQUENCE {

	pwAtmInboundAtmIf             InterfaceIndex,
	pwAtmInboundVpi               AtmVpIdentifier,
	pwAtmInboundVci               AtmVcIdentifier,
	pwAtmInboundTrafficParamDescr RowPointer,
	pwAtmInboundRowStatus         RowStatus }


pwAtmInboundAtmIf OBJECT-TYPE
	SYNTAX  InterfaceIndex
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The ATM Interface that sends cells into the ATM network
		after reconstructing cells from packets received from
		a PSN."
	-- 1.3.6.1.2.1.183.1.3.1.1
	::= { pwAtmInboundEntry 1 }


pwAtmInboundVpi OBJECT-TYPE
	SYNTAX  AtmVpIdentifier
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"VPI value of this ATM PW.
		If the pwType is atmTransparent, then the value will
		be set to zero."
	-- 1.3.6.1.2.1.183.1.3.1.2
	::= { pwAtmInboundEntry 2 }


pwAtmInboundVci OBJECT-TYPE
	SYNTAX  AtmVcIdentifier
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"VCI value of this ATM PW.
		If the pwType is atmTransparent, atmCell1to1Vpc, or
		atmCellNto1Vpc, then the value will be set to zero."
	-- 1.3.6.1.2.1.183.1.3.1.3
	::= { pwAtmInboundEntry 3 }


pwAtmInboundTrafficParamDescr OBJECT-TYPE
	SYNTAX  RowPointer
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"This object represents a pointer to an ATM traffic-parameter-
		specific row in either a private or standard table that will
		be employed while transmitting into the ATM network.  This
		table contains a set of self-consistent ATM traffic parameters
		including the ATM traffic service category.  A value of 0.0
		indicates Best Effort."
	-- 1.3.6.1.2.1.183.1.3.1.4
	::= { pwAtmInboundEntry 4 }


pwAtmInboundRowStatus OBJECT-TYPE
	SYNTAX  RowStatus
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"This object is used to create, modify, or delete a row in
		this table.  Unless otherwise specified, all writeable
		objects in this table MUST NOT be changed after row
		activation as explained in the pwAtmInboundEntry."
	-- 1.3.6.1.2.1.183.1.3.1.5
	::= { pwAtmInboundEntry 5 }


-- End of ATM PW Inbound Table
--Generic ATM PW table for all types of ATM PW connection.

pwAtmCfgTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF PwAtmCfgEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"This table specifies generic information for an ATM PW
		to be carried over PSN in any mode."
	-- 1.3.6.1.2.1.183.1.5
	::= { pwAtmObjects 5 }


pwAtmCfgEntry OBJECT-TYPE
	SYNTAX  PwAtmCfgEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"This table contains a set of parameters for
		the ATM PW that needs to be adapted and carried
		over the PSN.  This table is indexed by pwIndex from
		pwTable.  An entry is created for every new ATM
		type associated pwIndex in the pwTable.  Unless
		otherwise specified, all read-write objects in





		this table MAY be changed when the PW is defined
		as not active, and all RW objects values must
		persist after reboot."
	REFERENCE
		"See [PWMIB]."
	INDEX {
		pwIndex }
	-- 1.3.6.1.2.1.183.1.5.1
	::= { pwAtmCfgTable 1 }


PwAtmCfgEntry ::= SEQUENCE {

	pwAtmCfgMaxCellConcatenation       Unsigned32,
	pwAtmCfgFarEndMaxCellConcatenation Unsigned32,
	pwAtmCfgTimeoutMode                INTEGER,
	pwAtmClpQosMapping                 TruthValue }


pwAtmCfgMaxCellConcatenation OBJECT-TYPE
	SYNTAX  Unsigned32 (1..29)
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"The maximum number of ATM cells that can be
		concatenated into one PW packet towards the PSN.
		In a non-LDP or other signaling protocol environment,
		this object MAY be changed at anytime, but traffic
		might be interrupted; otherwise, it may be changed
		when PW is not active."
	-- 1.3.6.1.2.1.183.1.5.1.1
	::= { pwAtmCfgEntry 1 }


pwAtmCfgFarEndMaxCellConcatenation OBJECT-TYPE
	SYNTAX  Unsigned32 (1..29)
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"The maximum number of ATM cells that can be
		concatenated into one PW packet towards PSN as reported by
		the far end.  If there is no LDP in use, the object will
		either return a value of 0 or allow setting it for calculating
		protocol overhead."
	-- 1.3.6.1.2.1.183.1.5.1.2
	::= { pwAtmCfgEntry 2 }


pwAtmCfgTimeoutMode OBJECT-TYPE
	SYNTAX  INTEGER {
			notApplicable(1),
			disabled(2),
			enabled(3) }
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"This object determines whether or not a packet can be
		transmitted to the PSN based on timeout expiration
		for collecting cells.  The actual handling of the
		timeout is implementation-specific; as such,
		this object may be changed at any time under proper
		consideration of the traffic interruption effect."
	-- 1.3.6.1.2.1.183.1.5.1.3
	::= { pwAtmCfgEntry 3 }


pwAtmClpQosMapping OBJECT-TYPE
	SYNTAX  TruthValue
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"This object indicates whether the Cell Loss Priority
		(CLP) bits should be considered when setting the
		value in the Quality-of-Service fields of the
		encapsulating protocol (e.g., EXP fields of the
		MPLS Label Stack).  Selecting True allows the drop
		precedence to be preserved across the PSN.  In
		transparent cell transport, the value of this object
		MUST be false(2); in other cases, it can be changed
		at any time."
	REFERENCE
		"See section 12 of [ATMENCAP]."
	-- 1.3.6.1.2.1.183.1.5.1.4
	::= { pwAtmCfgEntry 4 }


-- Device capable of implementing N:1, 1:1, and transparent cell
-- mode assumes to support the N:1 table for all
-- modes with respective applicable setting.
-- In such implementation, user can create an entry for either
-- 1:1 or transparent cell transport modes only
-- in pwAtmInboundNto1Table. The side effect of such
-- will be an automatic create of the respective line in the
-- pwAtmOutboundNto1Table.
-- ATM PW Outbound Table for N to 1 connection

pwAtmOutboundNto1Table OBJECT-TYPE
	SYNTAX  SEQUENCE OF PwAtmOutboundNto1Entry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"This table specifies the information for an ATM PW to
		be carried over the PSN in the outbound direction.  Up to
		N entries can be created in this table for every





		entry in the pwTable with a pwType equal to:
		atmCellNto1Vcc(9) or atmCellNto1Vpc(10).
		An entry can be created only when the VP/VC are known.
		A single entry will be created in this table for every
		entry in the pwTable with a pwType equal to
		one of the following: atmCell1to1Vcc(12),
		atmCell1to1Vpc(13), atmAal5PduVcc(14),
		atmAal5SduVcc(2), or atmTransparent(3).

		"
	-- 1.3.6.1.2.1.183.1.6
	::= { pwAtmObjects 6 }


pwAtmOutboundNto1Entry OBJECT-TYPE
	SYNTAX  PwAtmOutboundNto1Entry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"A row in this table represents an ATM PW that needs to be
		adapted and carried over PSN.  This table is indexed by
		pwIndex from pwTable and the ATM interface with VPL/VCLs.
		In atmTransparent(3), Vpi and VCi will be 0xFFFF
		during set operation.
		Unless otherwise specified, all read-create objects in this
		table MUST NOT be changed after row activation
		and SHOULD remain unchanged after reboot."
	INDEX {
		pwIndex,
		pwAtmOutboundNto1AtmIf,
		pwAtmOutboundNto1Vpi,
		pwAtmOutboundNto1Vci }
	-- 1.3.6.1.2.1.183.1.6.1
	::= { pwAtmOutboundNto1Table 1 }


PwAtmOutboundNto1Entry ::= SEQUENCE {

	pwAtmOutboundNto1AtmIf             InterfaceIndex,
	pwAtmOutboundNto1Vpi               AtmVpIdentifier,
	pwAtmOutboundNto1Vci               AtmVcIdentifier,
	pwAtmOutboundNto1RowStatus         RowStatus,
	pwAtmOutboundNto1TrafficParamDescr RowPointer,
	pwAtmOutboundNto1MappedVpi         AtmVpIdentifier,
	pwAtmOutboundNto1MappedVci         AtmVcIdentifier }


pwAtmOutboundNto1AtmIf OBJECT-TYPE
	SYNTAX  InterfaceIndex
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The ATM Interface that receives cells from the ATM network."
	-- 1.3.6.1.2.1.183.1.6.1.1
	::= { pwAtmOutboundNto1Entry 1 }


pwAtmOutboundNto1Vpi OBJECT-TYPE
	SYNTAX  AtmVpIdentifier
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"VPI value of this ATM PW.  In atmTransparent(3),
		Vpi will be the equivalent of 0xFFFF."
	-- 1.3.6.1.2.1.183.1.6.1.2
	::= { pwAtmOutboundNto1Entry 2 }


pwAtmOutboundNto1Vci OBJECT-TYPE
	SYNTAX  AtmVcIdentifier
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"VCI value of this ATM PW.  In atmTransparent(3), or
		the VP case, the value will be the equivalent of
		0xFFFF."
	-- 1.3.6.1.2.1.183.1.6.1.3
	::= { pwAtmOutboundNto1Entry 3 }


pwAtmOutboundNto1RowStatus OBJECT-TYPE
	SYNTAX  RowStatus
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"This object is used to create, modify or delete a row in
		this table."
	-- 1.3.6.1.2.1.183.1.6.1.4
	::= { pwAtmOutboundNto1Entry 4 }


pwAtmOutboundNto1TrafficParamDescr OBJECT-TYPE
	SYNTAX  RowPointer
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"This object represents a pointer to an ATM traffic-parameter-
		specific row in either private or standard table that will
		be employed while receiving cells from the ATM network.
		This table should contain a set
		of self-consistent ATM traffic parameters including the ATM
		traffic service category.  A value of 0.0 indicates Best
		Effort."
	-- 1.3.6.1.2.1.183.1.6.1.5
	::= { pwAtmOutboundNto1Entry 5 }


pwAtmOutboundNto1MappedVpi OBJECT-TYPE
	SYNTAX  AtmVpIdentifier
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The egress-generated VPI value of this ATM PW.  The





		entry is valid for PW type of atmCellNto1Vcc(9),
		atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
		atmCell1to1Vpc(13).  In other types, the value will be the
		equivalent of 0xFFFF.  Value MAY be changed when the
		PW is defined as not active."
	-- 1.3.6.1.2.1.183.1.6.1.6
	::= { pwAtmOutboundNto1Entry 6 }


pwAtmOutboundNto1MappedVci OBJECT-TYPE
	SYNTAX  AtmVcIdentifier
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The egress-generated VCI value of this ATM PW.  The
		entry is valid for PW type of atmCellNto1Vcc(9),
		atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
		atmCell1to1Vpc(13.  In the VP case or other types, the
		value will be the equivalent of 0xFFFF.
		Value MAY be changed when the PW is defined
		as not active."
	-- 1.3.6.1.2.1.183.1.6.1.7
	::= { pwAtmOutboundNto1Entry 7 }


-- ATM PW Inbound Table for N to 1 connection

pwAtmInboundNto1Table OBJECT-TYPE
	SYNTAX  SEQUENCE OF PwAtmInboundNto1Entry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"This table specifies the information for an ATM PW to
		be carried over PSN in the Inbound direction.  Up to
		N entries can be created in this table for every
		entry in the pwTable with a pwType equal to:
		atmCellNto1Vcc(9) or atmCellNto1Vpc(10).
		An entry can be created only when the VP/VC are known.
		A single entry will be created in this table for every
		entry in the pwTable with a pwType equal to
		one of the following: atmCell1to1Vcc(12),
		atmCell1to1Vpc(13), atmAal5PduVcc(14),
		atmAal5SduVcc(2), or atmTransparent(3)."
	-- 1.3.6.1.2.1.183.1.7
	::= { pwAtmObjects 7 }


pwAtmInboundNto1Entry OBJECT-TYPE
	SYNTAX  PwAtmInboundNto1Entry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"A row in this table represents an ATM PW that needs to be
		adapted and carried over PSN.  This table is indexed by





		pwIndex from pwTable and the ATM interface with VPL/VCLs.
		In atmTransparent(3), Vpi and VCi will be 0xFFFF
		during set operation.
		Unless otherwise specified, all Read-Create objects in this
		table MUST NOT be changed after row activation
		and SHOULD remain unchanged after reboot."
	INDEX {
		pwIndex,
		pwAtmInboundNto1AtmIf,
		pwAtmInboundNto1Vpi,
		pwAtmInboundNto1Vci }
	-- 1.3.6.1.2.1.183.1.7.1
	::= { pwAtmInboundNto1Table 1 }


PwAtmInboundNto1Entry ::= SEQUENCE {

	pwAtmInboundNto1AtmIf             InterfaceIndex,
	pwAtmInboundNto1Vpi               AtmVpIdentifier,
	pwAtmInboundNto1Vci               AtmVcIdentifier,
	pwAtmInboundNto1RowStatus         RowStatus,
	pwAtmInboundNto1TrafficParamDescr RowPointer,
	pwAtmInboundNto1MappedVpi         AtmVpIdentifier,
	pwAtmInboundNto1MappedVci         AtmVcIdentifier }


pwAtmInboundNto1AtmIf OBJECT-TYPE
	SYNTAX  InterfaceIndex
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The ATM Interface that receives cells from the ATM network."
	-- 1.3.6.1.2.1.183.1.7.1.1
	::= { pwAtmInboundNto1Entry 1 }


pwAtmInboundNto1Vpi OBJECT-TYPE
	SYNTAX  AtmVpIdentifier
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"VPI value of this ATM PW.  In atmTransparent(3),
		Vpi will be the equivalent of 0xFFFF."
	-- 1.3.6.1.2.1.183.1.7.1.2
	::= { pwAtmInboundNto1Entry 2 }


pwAtmInboundNto1Vci OBJECT-TYPE
	SYNTAX  AtmVcIdentifier
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"VCI value of this ATM PW.  In atmTransparent(3), or
		the VP case, the value will be the equivalent of
		0xFFFF."
	-- 1.3.6.1.2.1.183.1.7.1.3
	::= { pwAtmInboundNto1Entry 3 }


pwAtmInboundNto1RowStatus OBJECT-TYPE
	SYNTAX  RowStatus
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"This object is used to create, modify, or delete a row in
		this table."
	-- 1.3.6.1.2.1.183.1.7.1.4
	::= { pwAtmInboundNto1Entry 4 }


pwAtmInboundNto1TrafficParamDescr OBJECT-TYPE
	SYNTAX  RowPointer
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"This object represents a pointer to an ATM traffic-parameter-
		specific row in either a private or standard table that will
		be employed while receiving cells from the ATM network.
		This table should contain a set
		of self-consistent ATM traffic parameters including the ATM
		traffic service category.  A value of 0.0 indicates Best
		Effort."
	-- 1.3.6.1.2.1.183.1.7.1.5
	::= { pwAtmInboundNto1Entry 5 }


pwAtmInboundNto1MappedVpi OBJECT-TYPE
	SYNTAX  AtmVpIdentifier
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The generated VPI value of this ATM PW.  The
		entry is valid for PW type of atmCellNto1Vcc(9),
		atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
		atmCell1to1Vpc(13).  In other types, the value will be the
		equivalent of 0xFFFF.  Value MAY be changed when the
		PW is defined as not active."
	-- 1.3.6.1.2.1.183.1.7.1.6
	::= { pwAtmInboundNto1Entry 6 }


pwAtmInboundNto1MappedVci OBJECT-TYPE
	SYNTAX  AtmVcIdentifier
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The generated VCI value of this ATM PW.  The
		entry is valid for PW type of atmCellNto1Vcc(9),
		atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
		atmCell1to1Vpc(13.  In the VP case or other types, the
		value will be the equivalent of 0xFFFF.
		Value MAY be changed when the





		PW is defined as not active."
	-- 1.3.6.1.2.1.183.1.7.1.7
	::= { pwAtmInboundNto1Entry 7 }


-- ATM PW Outbound Perf Table
-- The following supplement the counters presented in the
-- PW generic MIB
-- ATM PW Performance Current Table.

pwAtmPerfCurrentTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF PwAtmPerfCurrentEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The current 15-minute interval counts are in
		this table.
		This table provides performance information per ATM PW."
	-- 1.3.6.1.2.1.183.1.8
	::= { pwAtmObjects 8 }


pwAtmPerfCurrentEntry OBJECT-TYPE
	SYNTAX  PwAtmPerfCurrentEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in this table is created by the agent for every
		pwAtmCfgTable entry.  After 15 minutes, the contents of this
		table entry are copied to a new entry in the
		pwAtmPerfInterval table and the counts in this entry
		are reset to zero."
	INDEX {
		pwIndex }
	-- 1.3.6.1.2.1.183.1.8.1
	::= { pwAtmPerfCurrentTable 1 }


PwAtmPerfCurrentEntry ::= SEQUENCE {

	pwAtmPerfCurrentMissingPkts   PerfCurrentCount,
	pwAtmPerfCurrentPktsReOrder   PerfCurrentCount,
	pwAtmPerfCurrentPktsMisOrder  PerfCurrentCount,
	pwAtmPerfCurrentPktsTimeout   PerfCurrentCount,
	pwAtmPerfCurrentCellsXmit     PerfCurrentCount,
	pwAtmPerfCurrentCellsDropped  PerfCurrentCount,
	pwAtmPerfCurrentCellsReceived PerfCurrentCount,
	pwAtmPerfCurrentUnknownCells  PerfCurrentCount }


pwAtmPerfCurrentMissingPkts OBJECT-TYPE
	SYNTAX  PerfCurrentCount
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of missing packets (as detected via control word
		sequence number gaps)."
	-- 1.3.6.1.2.1.183.1.8.1.1
	::= { pwAtmPerfCurrentEntry 1 }


pwAtmPerfCurrentPktsReOrder OBJECT-TYPE
	SYNTAX  PerfCurrentCount
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of packets detected out of sequence (via control
		word sequence number), but successfully re-ordered.
		Note: some implementations may not support this feature."
	-- 1.3.6.1.2.1.183.1.8.1.2
	::= { pwAtmPerfCurrentEntry 2 }


pwAtmPerfCurrentPktsMisOrder OBJECT-TYPE
	SYNTAX  PerfCurrentCount
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of packets detected out of order (via control word
		sequence numbers)."
	-- 1.3.6.1.2.1.183.1.8.1.3
	::= { pwAtmPerfCurrentEntry 3 }


pwAtmPerfCurrentPktsTimeout OBJECT-TYPE
	SYNTAX  PerfCurrentCount
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of packets transmitted due to timeout expiration
		while attempting to collect cells."
	-- 1.3.6.1.2.1.183.1.8.1.4
	::= { pwAtmPerfCurrentEntry 4 }


pwAtmPerfCurrentCellsXmit OBJECT-TYPE
	SYNTAX  PerfCurrentCount
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of transmitted cells."
	-- 1.3.6.1.2.1.183.1.8.1.5
	::= { pwAtmPerfCurrentEntry 5 }


pwAtmPerfCurrentCellsDropped OBJECT-TYPE
	SYNTAX  PerfCurrentCount
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of dropped cells."
	-- 1.3.6.1.2.1.183.1.8.1.6
	::= { pwAtmPerfCurrentEntry 6 }


pwAtmPerfCurrentCellsReceived OBJECT-TYPE
	SYNTAX  PerfCurrentCount
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of received cells."
	-- 1.3.6.1.2.1.183.1.8.1.7
	::= { pwAtmPerfCurrentEntry 7 }


pwAtmPerfCurrentUnknownCells OBJECT-TYPE
	SYNTAX  PerfCurrentCount
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of cells received from the PSN with unknown VPI or
		VCI values.  This object is relevant only in N:1 mode."
	-- 1.3.6.1.2.1.183.1.8.1.8
	::= { pwAtmPerfCurrentEntry 8 }


-- End ATM PW Performance Current Interval Table
-- ATM PW Performance Interval Table.

pwAtmPerfIntervalTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF PwAtmPerfIntervalEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"This table provides performance information per ATM PW
		similar to the pwAtmPerfCurrentTable above.  However,
		these counts represent historical 15 minute intervals.
		Typically, this table will have a maximum of 96 entries
		for a 24 hour period."
	-- 1.3.6.1.2.1.183.1.9
	::= { pwAtmObjects 9 }


pwAtmPerfIntervalEntry OBJECT-TYPE
	SYNTAX  PwAtmPerfIntervalEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in this table is created by the agent for
		every pwAtmPerfCurrentEntry that is 15 minutes old.
		The contents of the Current entry are copied to the new
		entry here.  The Current entry then resets its counts
		to zero for the next current 15 minute interval."
	INDEX {
		pwIndex,
		pwAtmPerfIntervalNumber }
	-- 1.3.6.1.2.1.183.1.9.1
	::= { pwAtmPerfIntervalTable 1 }


PwAtmPerfIntervalEntry ::= SEQUENCE {

	pwAtmPerfIntervalNumber        Unsigned32,
	pwAtmPerfIntervalValidData     TruthValue,
	pwAtmPerfIntervalDuration      Unsigned32,
	pwAtmPerfIntervalMissingPkts   PerfIntervalCount,
	pwAtmPerfIntervalPktsReOrder   PerfIntervalCount,
	pwAtmPerfIntervalPktsMisOrder  PerfIntervalCount,
	pwAtmPerfIntervalPktsTimeout   PerfIntervalCount,
	pwAtmPerfIntervalCellsXmit     PerfIntervalCount,
	pwAtmPerfIntervalCellsDropped  PerfIntervalCount,
	pwAtmPerfIntervalCellsReceived PerfIntervalCount,
	pwAtmPerfIntervalUnknownCells  PerfIntervalCount }


pwAtmPerfIntervalNumber OBJECT-TYPE
	SYNTAX  Unsigned32 (1..96)
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"A number (normally between 1 and 96 to cover a 24 hour
		period) that identifies the interval for which the set
		of statistics is available.  The interval identified by 1
		is the most recently completed 15 minute interval, and
		the interval identified by N is the interval immediately
		preceding the one identified by N-1.  The minimum range of
		N is 1 through 4.  The default range is 1 through 32.  The
		maximum value of N is 96."
	-- 1.3.6.1.2.1.183.1.9.1.1
	::= { pwAtmPerfIntervalEntry 1 }


pwAtmPerfIntervalValidData OBJECT-TYPE
	SYNTAX  TruthValue
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"This variable indicates if the data for this interval
		is valid."
	-- 1.3.6.1.2.1.183.1.9.1.2
	::= { pwAtmPerfIntervalEntry 2 }


pwAtmPerfIntervalDuration OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The duration of a particular interval in seconds.
		Adjustments in the system's time-of-day clock, may
		cause the interval to be greater or less than the
		normal value.  Therefore, this actual interval value
		is provided."
	-- 1.3.6.1.2.1.183.1.9.1.3
	::= { pwAtmPerfIntervalEntry 3 }


pwAtmPerfIntervalMissingPkts OBJECT-TYPE
	SYNTAX  PerfIntervalCount
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of missing packets (as detected via control
		word sequence number gaps)."
	-- 1.3.6.1.2.1.183.1.9.1.4
	::= { pwAtmPerfIntervalEntry 4 }


pwAtmPerfIntervalPktsReOrder OBJECT-TYPE
	SYNTAX  PerfIntervalCount
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of packets detected out of sequence (via control
		word sequence number), but successfully re-ordered.
		Note: some implementations may not support this
		feature."
	-- 1.3.6.1.2.1.183.1.9.1.5
	::= { pwAtmPerfIntervalEntry 5 }


pwAtmPerfIntervalPktsMisOrder OBJECT-TYPE
	SYNTAX  PerfIntervalCount
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of packets detected out of order (via control word
		sequence numbers)."
	-- 1.3.6.1.2.1.183.1.9.1.6
	::= { pwAtmPerfIntervalEntry 6 }


pwAtmPerfIntervalPktsTimeout OBJECT-TYPE
	SYNTAX  PerfIntervalCount
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of packets transmitted due to timeout expiration."
	-- 1.3.6.1.2.1.183.1.9.1.7
	::= { pwAtmPerfIntervalEntry 7 }


pwAtmPerfIntervalCellsXmit OBJECT-TYPE
	SYNTAX  PerfIntervalCount
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of transmitted cells."
	-- 1.3.6.1.2.1.183.1.9.1.8
	::= { pwAtmPerfIntervalEntry 8 }


pwAtmPerfIntervalCellsDropped OBJECT-TYPE
	SYNTAX  PerfIntervalCount
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of dropped cells."
	-- 1.3.6.1.2.1.183.1.9.1.9
	::= { pwAtmPerfIntervalEntry 9 }


pwAtmPerfIntervalCellsReceived OBJECT-TYPE
	SYNTAX  PerfIntervalCount
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of received cells."
	-- 1.3.6.1.2.1.183.1.9.1.10
	::= { pwAtmPerfIntervalEntry 10 }


pwAtmPerfIntervalUnknownCells OBJECT-TYPE
	SYNTAX  PerfIntervalCount
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of cells received from the PSN with unknown VPI or
		VCI values.  This object is relevant only in N:1 mode."
	-- 1.3.6.1.2.1.183.1.9.1.11
	::= { pwAtmPerfIntervalEntry 11 }


-- End ATM PW Performance Interval Table
-- ATM PW 1day Performance Table

pwAtmPerf1DayIntervalTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF PwAtmPerf1DayIntervalEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"This table provides performance information per ATM PW
		similar to the pwAtmPerfIntervalTable above.  However,
		these counters represent historical one-day intervals up to
		one full month."
	-- 1.3.6.1.2.1.183.1.10
	::= { pwAtmObjects 10 }


pwAtmPerf1DayIntervalEntry OBJECT-TYPE
	SYNTAX  PwAtmPerf1DayIntervalEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"An entry is created in this table by the agent
		for every entry in the pwAtmCfgTable table."
	INDEX {
		pwIndex,
		pwAtmPerf1DayIntervalNumber }
	-- 1.3.6.1.2.1.183.1.10.1
	::= { pwAtmPerf1DayIntervalTable 1 }


PwAtmPerf1DayIntervalEntry ::= SEQUENCE {

	pwAtmPerf1DayIntervalNumber        Unsigned32,
	pwAtmPerf1DayIntervalValidData     TruthValue,
	pwAtmPerf1DayIntervalDuration      Unsigned32,
	pwAtmPerf1DayIntervalMissingPkts   Counter32,
	pwAtmPerf1DayIntervalPktsReOrder   Counter32,
	pwAtmPerf1DayIntervalPktsMisOrder  Counter32,
	pwAtmPerf1DayIntervalPktsTimeout   Counter32,
	pwAtmPerf1DayIntervalCellsXmit     Counter32,
	pwAtmPerf1DayIntervalCellsDropped  Counter32,
	pwAtmPerf1DayIntervalCellsReceived Counter32,
	pwAtmPerf1DayIntervalUnknownCells  Counter32 }


pwAtmPerf1DayIntervalNumber OBJECT-TYPE
	SYNTAX  Unsigned32 (1..365)
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The number of intervals, where 1 indicates current day
		measured period and 2 and above indicate previous days,
		respectively."
	-- 1.3.6.1.2.1.183.1.10.1.1
	::= { pwAtmPerf1DayIntervalEntry 1 }


pwAtmPerf1DayIntervalValidData OBJECT-TYPE
	SYNTAX  TruthValue
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"This object indicates if the data for this interval
		is valid."
	-- 1.3.6.1.2.1.183.1.10.1.2
	::= { pwAtmPerf1DayIntervalEntry 2 }


pwAtmPerf1DayIntervalDuration OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The duration of a particular interval in seconds.
		Adjustments in the system's time-of-day clock may
		cause the interval to be greater or less than the
		normal value.  Therefore, this actual interval value
		is provided."
	-- 1.3.6.1.2.1.183.1.10.1.3
	::= { pwAtmPerf1DayIntervalEntry 3 }


pwAtmPerf1DayIntervalMissingPkts OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of missing packets (as detected via control word
		sequence number gaps)."
	-- 1.3.6.1.2.1.183.1.10.1.4
	::= { pwAtmPerf1DayIntervalEntry 4 }


pwAtmPerf1DayIntervalPktsReOrder OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of packets detected out of sequence (via control
		word sequence number), but successfully re-ordered.
		Note: some implementations may not support this
		feature."
	-- 1.3.6.1.2.1.183.1.10.1.5
	::= { pwAtmPerf1DayIntervalEntry 5 }


pwAtmPerf1DayIntervalPktsMisOrder OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of packets detected out of order (via control word
		sequence numbers) and that could not be re-ordered."
	-- 1.3.6.1.2.1.183.1.10.1.6
	::= { pwAtmPerf1DayIntervalEntry 6 }


pwAtmPerf1DayIntervalPktsTimeout OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of packets transmitted due to timeout expiration."
	-- 1.3.6.1.2.1.183.1.10.1.7
	::= { pwAtmPerf1DayIntervalEntry 7 }


pwAtmPerf1DayIntervalCellsXmit OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of transmitted cells."
	-- 1.3.6.1.2.1.183.1.10.1.8
	::= { pwAtmPerf1DayIntervalEntry 8 }


pwAtmPerf1DayIntervalCellsDropped OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of dropped cells."
	-- 1.3.6.1.2.1.183.1.10.1.9
	::= { pwAtmPerf1DayIntervalEntry 9 }


pwAtmPerf1DayIntervalCellsReceived OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of received cells."
	-- 1.3.6.1.2.1.183.1.10.1.10
	::= { pwAtmPerf1DayIntervalEntry 10 }


pwAtmPerf1DayIntervalUnknownCells OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of cells received from the PSN with unknown VPI
		or VCI values.  This object is relevant only in N:1 mode."
	-- 1.3.6.1.2.1.183.1.10.1.11
	::= { pwAtmPerf1DayIntervalEntry 11 }


-- End of ATM PW Performance table

pwAtmCompliances OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.183.2.1
	::= { pwAtmConformance 1 }

pwAtmGroups OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.183.2.2
	::= { pwAtmConformance 2 }


pwAtmCompliance MODULE-COMPLIANCE
	STATUS  current
	DESCRIPTION
		"The compliance statement for agents that support
		ATM PW."

	MODULE 
	MANDATORY-GROUPS {
			pwAtmCfgGroup,
			pwAtmPerfGroup }

	OBJECT pwAtmCfgFarEndMaxCellConcatenation
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"The ability to set this object
		is not required."
	GROUP pwAtmOutbound1to1Group
	  DESCRIPTION
		"This group is mandatory only for implementations
		that support the ATM PW 1:1 mode and not using
		the Nto1 table."
	GROUP pwAtmInbound1to1Group
	  DESCRIPTION
		"This group is mandatory only for implementations
		that support the ATM PW 1:1 mode and not using
		the Nto1 table."
	GROUP pwAtmOutboundNto1Group
	  DESCRIPTION
		"This group is mandatory only for implementations
		that support the ATM PW N:1 and transparent mode."
	GROUP pwAtmInboundNto1Group
	  DESCRIPTION
		"This group is mandatory only for implementations
		that support the ATM PW N:1 and transparent mode."
	-- 1.3.6.1.2.1.183.2.1.2
	::= { pwAtmCompliances 2 }

-- Units of conformance.

pwAtmCfgGroup OBJECT-GROUP
	OBJECTS {
		pwAtmCfgMaxCellConcatenation,
		pwAtmCfgFarEndMaxCellConcatenation,
		pwAtmCfgTimeoutMode,
		pwAtmClpQosMapping }
	STATUS  current
	DESCRIPTION
		"Collection of objects for basic ATM PW
		configuration."
	-- 1.3.6.1.2.1.183.2.2.5
	::= { pwAtmGroups 5 }

pwAtmPerfGroup OBJECT-GROUP
	OBJECTS {
		pwAtmPerfCurrentMissingPkts,
		pwAtmPerfCurrentPktsReOrder,
		pwAtmPerfCurrentPktsMisOrder,
		pwAtmPerfCurrentPktsTimeout,
		pwAtmPerfCurrentCellsXmit,
		pwAtmPerfCurrentCellsDropped,
		pwAtmPerfCurrentCellsReceived,
		pwAtmPerfCurrentUnknownCells,
		pwAtmPerfIntervalValidData,
		pwAtmPerfIntervalDuration,
		pwAtmPerfIntervalMissingPkts,
		pwAtmPerfIntervalPktsReOrder,
		pwAtmPerfIntervalPktsMisOrder,
		pwAtmPerfIntervalPktsTimeout,
		pwAtmPerfIntervalCellsXmit,
		pwAtmPerfIntervalCellsDropped,
		pwAtmPerfIntervalCellsReceived,
		pwAtmPerfIntervalUnknownCells,
		pwAtmPerf1DayIntervalValidData,
		pwAtmPerf1DayIntervalDuration,
		pwAtmPerf1DayIntervalMissingPkts,
		pwAtmPerf1DayIntervalPktsReOrder,
		pwAtmPerf1DayIntervalPktsMisOrder,
		pwAtmPerf1DayIntervalPktsTimeout,
		pwAtmPerf1DayIntervalCellsXmit,
		pwAtmPerf1DayIntervalCellsDropped,
		pwAtmPerf1DayIntervalCellsReceived,
		pwAtmPerf1DayIntervalUnknownCells }
	STATUS  current
	DESCRIPTION
		"Collection of objects for basic ATM PW Performance."
	-- 1.3.6.1.2.1.183.2.2.6
	::= { pwAtmGroups 6 }

pwAtmOutbound1to1Group OBJECT-GROUP
	OBJECTS {
		pwAtmOutboundAtmIf,
		pwAtmOutboundVpi,
		pwAtmOutboundVci,
		pwAtmOutboundTrafficParamDescr,
		pwAtmOutboundRowStatus }
	STATUS  current
	DESCRIPTION
		"Collection of objects for basic 1:1 ATM PW outbound
		configuration."
	-- 1.3.6.1.2.1.183.2.2.7
	::= { pwAtmGroups 7 }

pwAtmInbound1to1Group OBJECT-GROUP
	OBJECTS {
		pwAtmInboundAtmIf,
		pwAtmInboundVpi,
		pwAtmInboundVci,
		pwAtmInboundTrafficParamDescr,
		pwAtmInboundRowStatus }
	STATUS  current
	DESCRIPTION
		"Collection of objects for basic 1:1 ATM PW inbound
		configuration."
	-- 1.3.6.1.2.1.183.2.2.8
	::= { pwAtmGroups 8 }

pwAtmOutboundNto1Group OBJECT-GROUP
	OBJECTS {
		pwAtmOutboundNto1RowStatus,
		pwAtmOutboundNto1TrafficParamDescr,
		pwAtmOutboundNto1MappedVpi,
		pwAtmOutboundNto1MappedVci }
	STATUS  current
	DESCRIPTION
		"Collection of objects for N:1, 1:1, or transparent
		ATM PW outbound configuration."
	-- 1.3.6.1.2.1.183.2.2.9
	::= { pwAtmGroups 9 }

pwAtmInboundNto1Group OBJECT-GROUP
	OBJECTS {
		pwAtmInboundNto1RowStatus,
		pwAtmInboundNto1TrafficParamDescr,
		pwAtmInboundNto1MappedVpi,
		pwAtmInboundNto1MappedVci }
	STATUS  current
	DESCRIPTION
		"Collection of objects for N:1, 1:1, or transparent
		ATM PW inbound configuration."
	-- 1.3.6.1.2.1.183.2.2.10
	::= { pwAtmGroups 10 }

END
