ISIS-MIB DEFINITIONS ::= BEGIN

IMPORTS
	TEXTUAL-CONVENTION,
	RowStatus,
	TruthValue,
	TimeStamp
		FROM SNMPv2-TC		-- RFC2579
	MODULE-IDENTITY,
	OBJECT-TYPE,
	NOTIFICATION-TYPE,
	Unsigned32,
	Counter32,
	mib-2
		FROM SNMPv2-SMI		-- RFC2578
	MODULE-COMPLIANCE,
	OBJECT-GROUP,
	NOTIFICATION-GROUP
		FROM SNMPv2-CONF		-- RFC2580
	SnmpAdminString
		FROM SNMP-FRAMEWORK-MIB		-- RFC2571
	IndexInteger,
	IndexIntegerNextFree
		FROM DIFFSERV-MIB		-- RFC3289
	InterfaceIndex
		FROM IF-MIB		-- RFC2863
	InetAddressType,
	InetAddress,
	InetAddressPrefixLength
		FROM INET-ADDRESS-MIB;

-- RFC3291

isisMIB MODULE-IDENTITY
	LAST-UPDATED "200604040000Z"	-- Apr 4, 2006 12:00:00 AM
	ORGANIZATION "IETF IS-IS for IP Internets Working Group"
	CONTACT-INFO
		"IS-IS for IP Internets working Group
		http://www.ietf.org/html.charters/isis-charter.html
		isis-wg@ietf.org

		Jeff Parker
		Department of Computer Science
		Middlebury College,
		Middlebury, Vermont 05753
		jeffp at middlbury dot edu"
	DESCRIPTION
		"This document describes a management information base for
		the IS-IS Routing protocol, as described in ISO 10589,
		when it is used to construct routing tables for IP
		networks, as described in RFC 1195.

		This document is based on a 1994 IETF document by Chris
		Gunner.  This version has been modified to include
		current syntax, to exclude portions of the protocol that
		are not relevant to IP, and to add management support for
		current practice.








		Copyright (C) The Internet Society (2006).  This version
		of this MIB module is part of RFC 4444; see the RFC
		itself for full legal notices."
	REVISION "200604040000Z"	-- Apr 4, 2006 12:00:00 AM
	DESCRIPTION
		"Initial version, published as RFC 4444."
	-- 1.3.6.1.2.1.138
	::= { mib-2 138 }


-- Top-level structure of the MIB

isisNotifications OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.138.0
	::= { isisMIB 0 }

isisObjects OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.138.1
	::= { isisMIB 1 }

isisConformance OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.138.2
	::= { isisMIB 2 }

-- OBJECT IDENTIFIER definitions
-- System wide attributes.

isisSystem OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.138.1.1
	::= { isisObjects 1 }

-- Attributes associated with the domain or with the area.

isisSysLevel OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.138.1.2
	::= { isisObjects 2 }

-- Attributes associated with one Circuit

isisCirc OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.138.1.3
	::= { isisObjects 3 }

-- Attributes associated with area or domain relevant within a Circuit.

isisCircLevelValues OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.138.1.4
	::= { isisObjects 4 }

-- System and circuit counters.

isisCounters OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.138.1.5
	::= { isisObjects 5 }

-- Attributes associated with an adjacent Protocol Peer.

isisISAdj OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.138.1.6
	::= { isisObjects 6 }

-- Attributes associated with a configured address.

isisReachAddr OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.138.1.7
	::= { isisObjects 7 }

-- Attributes associated with IP routes learned by
-- configuration or through another protocol.

isisIPReachAddr OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.138.1.8
	::= { isisObjects 8 }

-- The collection of Link State PDUs known to the Intermediate System

isisLSPDataBase OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.138.1.9
	::= { isisObjects 9 }

-- Objects included in Notifications.

isisNotification OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.138.1.10
	::= { isisObjects 10 }

-- Type definitions

IsisOSINSAddress ::= TEXTUAL-CONVENTION
	STATUS  current
	DESCRIPTION
		"OSI Network Service Address, e.g., NSAP, SNPA, or Network
		Entity Title"
	SYNTAX OCTET STRING (SIZE (0..20))


IsisSystemID ::= TEXTUAL-CONVENTION
	STATUS  current
	DESCRIPTION
		"The ID for an Intermediate System.  This should
		be unique within a network, and is included
		in all PDUs originated by an Intermediate System.
		The protocol does not place any meanings upon
		the bits, other than using ordering to break
		ties in electing a Designated IS on a LAN."
	REFERENCE
		"{ISIS.aoi systemId (119)}"
	SYNTAX OCTET STRING (SIZE (6))


IsisLinkStatePDUID ::= TEXTUAL-CONVENTION
	STATUS  current
	DESCRIPTION
		"The 8-byte Link State PDU (LSP) ID,
		consisting of the 6-byte SystemID of the
		originating IS; a one-byte PseudoNode ID,
		which is 0 unless the LSP represents the
		topology of a LAN; and a one-byte LSP
		fragment number that is issued in sequence,
		starting with 0.  Non-zero PseudoNode IDs
		need to be unique to the IS but need not
		match the IfIndex."
	REFERENCE
		"{See section 9.8 of ISO 10589}"
	SYNTAX OCTET STRING (SIZE (8))


IsisAdminState ::= TEXTUAL-CONVENTION
	STATUS  current
	DESCRIPTION
		"Type used in enabling and disabling a row."
	SYNTAX INTEGER {
			on(1),
			off(2) }


IsisLSPBuffSize ::= TEXTUAL-CONVENTION
	DISPLAY-HINT "d"
	STATUS  current
	DESCRIPTION
		"Integer sub-range for maximum LSP size."
	SYNTAX Unsigned32 (512..16000)


IsisLevelState ::= TEXTUAL-CONVENTION
	STATUS  current
	DESCRIPTION
		"States of the IS-IS protocol."
	SYNTAX INTEGER {
			off(1),
			on(2),
			waiting(3),
			overloaded(4) }


IsisSupportedProtocol ::= TEXTUAL-CONVENTION
	STATUS  current
	DESCRIPTION
		"Types of network protocol supported by Integrated IS-IS.
		The values for ISO8473 and IP are those registered for
		these protocols in ISO TR9577."
	REFERENCE
		"{See section 5.3.1 of RFC 1195}"
	SYNTAX INTEGER {
			iso8473(129),
			ipV6(142),
			ip(204) }


IsisDefaultMetric ::= TEXTUAL-CONVENTION
	DISPLAY-HINT "d"
	STATUS  current
	DESCRIPTION
		"Integer sub-range for default metric for single hop.
		ISO 10589 provides for 4 types of metric.  Only the
		'default' metric is used in practice."
	REFERENCE
		"{See section 7.2.2 of ISO 10589}"
	SYNTAX Unsigned32 (0..63)


IsisWideMetric ::= TEXTUAL-CONVENTION
	DISPLAY-HINT "d"
	STATUS  current
	DESCRIPTION
		"Wide metric for IS Neighbors.  ISO 10589 provides a
		6-bit metric.  Traffic Engineering extensions provide
		24-bit metrics."
	REFERENCE
		"{See section 3 of RFC 3784}"
	SYNTAX Unsigned32 (0..16777215)


IsisFullMetric ::= TEXTUAL-CONVENTION
	DISPLAY-HINT "d"
	STATUS  current
	DESCRIPTION
		"Full metric for IP Routes.  Traffic Engineering extensions
		provide 32-bit metrics."
	REFERENCE
		"{See section 4 of RFC 3784}"
	SYNTAX Unsigned32


IsisMetricType ::= TEXTUAL-CONVENTION
	STATUS  current
	DESCRIPTION
		"Is this an Internal or External Metric?"
	REFERENCE
		"{See section 7.2.2 of ISO 10589}"
	SYNTAX INTEGER {
			internal(1),
			external(2) }


IsisMetricStyle ::= TEXTUAL-CONVENTION
	STATUS  current
	DESCRIPTION
		"Do we use RFC 1195 style metrics or wide metrics?"
	REFERENCE
		"{See section 5 of RFC 3787}"
	SYNTAX INTEGER {
			narrow(1),
			wide(2),
			both(3) }


IsisISLevel ::= TEXTUAL-CONVENTION
	STATUS  current
	DESCRIPTION
		"Identifies a level."
	REFERENCE
		"{See definitions 3.6.1 and 3.6.11 of ISO 10589}"
	SYNTAX INTEGER {
			area(1),   	-- L1
			domain(2) 	-- L2
			}


IsisLevel ::= TEXTUAL-CONVENTION
	STATUS  current
	DESCRIPTION
		"Identifies one or more levels."
	REFERENCE
		"{See definitions 3.6.1 and 3.6.11 of ISO 10589}"
	SYNTAX INTEGER {
			level1(1),
			level2(2),
			level1and2(3) }


IsisPDUHeader ::= TEXTUAL-CONVENTION
	STATUS  current
	DESCRIPTION
		"A block to contain the header from a PDU."
	SYNTAX OCTET STRING (SIZE (0..64))


IsisCircuitID ::= TEXTUAL-CONVENTION
	STATUS  current
	DESCRIPTION
		"ID for a circuit."
	REFERENCE
		"{See section 7.2.7 of ISO 10589}"
	SYNTAX OCTET STRING (SIZE (0 | 7))


IsisISPriority ::= TEXTUAL-CONVENTION
	DISPLAY-HINT "d"
	STATUS  current
	DESCRIPTION
		"Integer sub-range for IS-IS priority."
	REFERENCE
		"{See section 9.5 of ISO 10589}"
	SYNTAX Unsigned32 (0..127)


IsisUnsigned16TC ::= TEXTUAL-CONVENTION
	DISPLAY-HINT "d"
	STATUS  current
	DESCRIPTION
		"An Unsigned32 further restricted to 16 bits.  Note that
		the ASN.1 BER encoding may still require 24 bits for
		some values."
	SYNTAX Unsigned32 (0..65535)


IsisUnsigned8TC ::= TEXTUAL-CONVENTION
	DISPLAY-HINT "d"
	STATUS  current
	DESCRIPTION
		"An Unsigned32 further restricted to 8 bits.  Note that
		the ASN.1 BER encoding may still require 16 bits for
		some values."
	SYNTAX Unsigned32 (0..255)


-- Behavior Definitions
-- ResettingTimer behavior definition
--
-- "This behavior applies to objects that specify the interval
-- between events in the operation of the protocol state machine.
-- If the value of such an object is set to a new value while
-- the protocol state machine is in operation, the implementation
-- shall take the necessary steps to ensure that for any time
-- interval that was in progress when the value of the
-- corresponding object was changed, the next expiration of that
-- interval takes place the specified time after the original
-- start of that interval, or immediately, whichever is later.
-- The precision with which this time shall be implemented shall
-- be the same as that associated with the basic operation of
-- the timer object."
-- ReplaceOnlyWhileDisabled behavior definition
-- "This behavior applies to objects that may not be modified
-- while the corresponding table row's variable of type
-- IsisAdminState is in state on."
-- ManualOrAutomatic behavior definition
-- "This behavior applies to objects that are read-write
-- if the object was created manually.  Objects that were
-- created automatically that have this behavior are
-- read-only.

isisSysObject OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.138.1.1.1
	::= { isisSystem 1 }

isisSysVersion OBJECT-TYPE
	SYNTAX  INTEGER {
			unknown(0),
			one(1) }
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The version number of the IS-IS protocol that
		is implemented."
	REFERENCE
		"{ISIS.aoi version (1)}"
	DEFVAL { one }
	-- 1.3.6.1.2.1.138.1.1.1.1
	::= { isisSysObject 1 }


isisSysLevelType OBJECT-TYPE
	SYNTAX  IsisLevel
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"At which levels is the Intermediate System
		running? This object may not be modified when
		the isisSysAdminState variable is in state 'on'
		for this Intermediate System.

		Configured values MUST survive an agent reboot."
	REFERENCE
		"{ISIS.aoi iSType (2)}"
	DEFVAL { level1and2 }
	-- 1.3.6.1.2.1.138.1.1.1.2
	::= { isisSysObject 2 }


isisSysID OBJECT-TYPE
	SYNTAX  IsisSystemID
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"The ID for this Intermediate System.
		This value is appended to each of the
		area addresses to form the Network Entity Titles.
		The derivation of a value for this object is
		implementation specific.  Some implementations may
		automatically assign values and not permit an
		SNMP write, while others may require the value
		to be set manually.

		Configured values MUST survive an agent reboot."
	REFERENCE
		"{ISIS.aoi systemId (119)}"
	-- 1.3.6.1.2.1.138.1.1.1.3
	::= { isisSysObject 3 }


isisSysMaxPathSplits OBJECT-TYPE
	SYNTAX  Unsigned32 (1..32)
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"Maximum number of paths with equal routing metric value
		which it is permitted to split between.  This object
		may not be modified when the isisSysAdminState variable
		is in state 'on' for this Intermediate System.

		Configured values MUST survive an agent reboot."
	REFERENCE
		"{ISIS.aoi maximumPathSplits (3)}"
	DEFVAL { 2 }
	-- 1.3.6.1.2.1.138.1.1.1.4
	::= { isisSysObject 4 }


isisSysMaxLSPGenInt OBJECT-TYPE
	SYNTAX  Unsigned32 (1..65235)
	UNITS	"seconds"
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"Maximum interval, in seconds, between generated LSPs
		by this Intermediate System.  This object follows
		the ResettingTimer behavior.  The value must be
		greater than any value configured for
		isisSysLevelMinLSPGenInt, and should be at least 300
		seconds less than isisSysMaxAge.

		Configured values MUST survive an agent reboot."
	REFERENCE
		"{ISIS.aoi maximumLSPGenerationInterval (6)}"
	DEFVAL { 900 }
	-- 1.3.6.1.2.1.138.1.1.1.5
	::= { isisSysObject 5 }


isisSysPollESHelloRate OBJECT-TYPE
	SYNTAX  IsisUnsigned16TC (1..65535)
	UNITS	"seconds"
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"The value, in seconds, to be used for the suggested ES
		configuration timer in ISH PDUs when soliciting the ES
		configuration.

		Configured values MUST survive an agent reboot."
	REFERENCE
		"{ISIS.aoi pollESHelloRate (13)}"
	DEFVAL { 50 }
	-- 1.3.6.1.2.1.138.1.1.1.6
	::= { isisSysObject 6 }


isisSysWaitTime OBJECT-TYPE
	SYNTAX  IsisUnsigned16TC (1..65535)
	UNITS	"seconds"
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"Number of seconds to delay in state 'waiting' before
		entering the state 'on'.  This object follows the
		ResettingTimer behavior.

		Configured values MUST survive an agent reboot."
	REFERENCE
		"{ISIS.aoi waitingTime (15)}"
	DEFVAL { 60 }
	-- 1.3.6.1.2.1.138.1.1.1.7
	::= { isisSysObject 7 }


isisSysAdminState OBJECT-TYPE
	SYNTAX  IsisAdminState
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"The administrative state of this Intermediate
		System.  Setting this object to the value 'on'
		when its current value is 'off' enables
		the Intermediate System.

		Configured values MUST survive an agent reboot."
	DEFVAL { off }
	-- 1.3.6.1.2.1.138.1.1.1.8
	::= { isisSysObject 8 }


isisSysL2toL1Leaking OBJECT-TYPE
	SYNTAX  TruthValue
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"If true, allow the router to leak L2 routes into L1.

		Configured values MUST survive an agent reboot."
	DEFVAL { false }
	-- 1.3.6.1.2.1.138.1.1.1.9
	::= { isisSysObject 9 }


isisSysMaxAge OBJECT-TYPE
	SYNTAX  IsisUnsigned16TC (350..65535)
	UNITS	"seconds"
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"Value to place in RemainingLifeTime field of
		the LSPs we generate.
		This should be at least 300 seconds greater than
		isisSysMaxLSPGenInt.

		Configured values MUST survive an agent reboot."
	DEFVAL { 1200 }
	-- 1.3.6.1.2.1.138.1.1.1.10
	::= { isisSysObject 10 }


isisSysReceiveLSPBufferSize OBJECT-TYPE
	SYNTAX  IsisUnsigned16TC (1492..16000)
	UNITS	"bytes"
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"Size of the largest buffer we are designed or
		configured to store.  This should be at least
		as big as the maximum isisSysLevelOrigLSPBuffSize
		supported by the system.





		If resources allow, we will store and flood LSPs
		larger than isisSysReceiveLSPBufferSize, as this
		can help avoid problems in networks with different
		values for isisSysLevelOrigLSPBuffSize.

		Configured values MUST survive an agent reboot."
	DEFVAL { 1492 }
	-- 1.3.6.1.2.1.138.1.1.1.11
	::= { isisSysObject 11 }


isisSysProtSupported OBJECT-TYPE
	SYNTAX  BITS {
			iso8473(0),
			ipv4(1),
			ipv6(2) }
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"This attribute contains the set of protocols
		supported by this Intermediate System."
	-- 1.3.6.1.2.1.138.1.1.1.12
	::= { isisSysObject 12 }


isisSysNotificationEnable OBJECT-TYPE
	SYNTAX  TruthValue
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"If this object is set to true(1), then it enables
		the emission of IS-IS Notifications.  If it is
		set to false(2), these notifications are not sent.

		Configured values MUST survive an agent reboot."
	DEFVAL { true }
	-- 1.3.6.1.2.1.138.1.1.1.13
	::= { isisSysObject 13 }


-- The Level 1 Manual Area Address Table

isisManAreaAddrTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF IsisManAreaAddrEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The set of manual area addresses configured on this
		Intermediate System.

		At least one row in which the value of
		isisManAreaAddrExistState is active must be present.
		The maximum number of rows in this table for





		which the object isisManAreaAddrExistState has the
		value active is 3.

		An attempt to create more than 3 rows of
		isisManAreaAddrEntry with state 'active' in one
		instance of the IS-IS protocol should
		return inconsistentValue."
	REFERENCE
		"{ISIS.aoi manualAreaAddresses (10)}"
	-- 1.3.6.1.2.1.138.1.1.2
	::= { isisSystem 2 }


isisManAreaAddrEntry OBJECT-TYPE
	SYNTAX  IsisManAreaAddrEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Each entry contains one area address manually configured
		on this system.

		Dynamically created rows MUST survive an agent reboot."
	INDEX {
		isisManAreaAddr }
	-- 1.3.6.1.2.1.138.1.1.2.1
	::= { isisManAreaAddrTable 1 }


IsisManAreaAddrEntry ::= SEQUENCE {

	isisManAreaAddr           IsisOSINSAddress,
	isisManAreaAddrExistState RowStatus }


isisManAreaAddr OBJECT-TYPE
	SYNTAX  IsisOSINSAddress
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"A manually configured area address for this system.

		Note: An index for the entry {1, {49.0001} active} in
		this table would be the ordered pair
		(1, (0x03 0x49 0x00 0x01)), as the length of an octet
		string is part of the OID."
	-- 1.3.6.1.2.1.138.1.1.2.1.1
	::= { isisManAreaAddrEntry 1 }


isisManAreaAddrExistState OBJECT-TYPE
	SYNTAX  RowStatus
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The state of the isisManAreaAddrEntry.  If the
		isisSysAdminState for this Intermediate System is 'on' and
		an attempt is made to set this object to the value
		'destroy' or 'notInService' when this is the only
		isisManAreaAddrEntry in state 'active' for this
		Intermediate System should return inconsistentValue.

		A row entry cannot be modified when the value of this
		object is 'active'."
	-- 1.3.6.1.2.1.138.1.1.2.1.2
	::= { isisManAreaAddrEntry 2 }


-- The Level 1 Area Address Table
-- The Level 1 Area Address Table contains the
-- union of the sets of relevant area addresses configured
-- or learned from Level 1 LSPs received by this Intermediate System.

isisAreaAddrTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF IsisAreaAddrEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The union of the sets of area addresses reported in all
		Level 1 LSPs with fragment number zero generated by this
		Intermediate System, or received from other Intermediate
		Systems that are reachable via Level 1 routing."
	REFERENCE
		"{ISIS.aoi areaAddresses (18)}"
	-- 1.3.6.1.2.1.138.1.1.3
	::= { isisSystem 3 }


isisAreaAddrEntry OBJECT-TYPE
	SYNTAX  IsisAreaAddrEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Each entry contains one area address reported in a
		Level 1 LSP generated or received by this Intermediate
		System.

		Dynamically learned rows do not survive an agent reboot."
	INDEX {
		isisAreaAddr }
	-- 1.3.6.1.2.1.138.1.1.3.1
	::= { isisAreaAddrTable 1 }


IsisAreaAddrEntry ::= SEQUENCE {

	isisAreaAddr IsisOSINSAddress }


isisAreaAddr OBJECT-TYPE
	SYNTAX  IsisOSINSAddress
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"An area address reported in a Level 1 LSP."
	-- 1.3.6.1.2.1.138.1.1.3.1.1
	::= { isisAreaAddrEntry 1 }


-- The Summary Address Table
-- The Summary Address Table contains the set of summary
-- addresses manually configured for the Intermediate System.
--
-- This is used to control leaking L1 routes into L2.

isisSummAddrTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF IsisSummAddrEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The set of IP summary addresses to use in forming
		summary TLVs originated by this Intermediate System.

		An administrator may use a summary address to combine
		and modify IP Reachability announcements.  If the
		Intermediate system can reach any subset of the summary
		address, the summary address MUST be announced instead,
		at the configured metric."
	-- 1.3.6.1.2.1.138.1.1.4
	::= { isisSystem 4 }


isisSummAddrEntry OBJECT-TYPE
	SYNTAX  IsisSummAddrEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Each entry contains one IP summary address.

		Dynamically created rows MUST survive an agent reboot.

		Implementers need to be aware that if the total number
		of elements (octets or sub-identifiers) in
		isisSummAddress and isisSummAddrPrefixLen is too great,
		then OIDs of column instances in this table will have
		more than 128 subidentifiers and cannot be accessed
		using SNMPv1, SNMPv2c, or SNMPv3."
	INDEX {
		isisSummAddressType,
		isisSummAddress,
		isisSummAddrPrefixLen }
	-- 1.3.6.1.2.1.138.1.1.4.1
	::= { isisSummAddrTable 1 }


IsisSummAddrEntry ::= SEQUENCE {

	isisSummAddressType    InetAddressType,
	isisSummAddress        InetAddress,
	isisSummAddrPrefixLen  InetAddressPrefixLength,
	isisSummAddrExistState RowStatus,
	isisSummAddrMetric     IsisDefaultMetric,
	isisSummAddrFullMetric IsisFullMetric }


isisSummAddressType OBJECT-TYPE
	SYNTAX  InetAddressType
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The Type of IP address for this summary address."
	-- 1.3.6.1.2.1.138.1.1.4.1.1
	::= { isisSummAddrEntry 1 }


isisSummAddress OBJECT-TYPE
	SYNTAX  InetAddress
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The IP Address value for this summary address.
		The address must not contain any set host bits
		(bits set after the address prefix determined by
		isisSummAddrPrefixLen).

		The type of this address is determined by the value of
		the isisSummAddressType object."
	-- 1.3.6.1.2.1.138.1.1.4.1.2
	::= { isisSummAddrEntry 2 }


isisSummAddrPrefixLen OBJECT-TYPE
	SYNTAX  InetAddressPrefixLength
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The Length of the IP NetMask for this summary address.

		The values for the index objects isisSummAddress and





		isisSummAddrPrefixLen must be consistent.  When the value
		of isisSummAddress (excluding the zone index, if one
		is present) is x, then the bitwise logical-AND
		of x with the value of the mask formed from the
		corresponding index object isisSummAddrPrefixLen MUST be
		equal to x.  If not, then the index pair is not
		consistent, and an inconsistentName error must be
		returned on SET or CREATE requests."
	-- 1.3.6.1.2.1.138.1.1.4.1.3
	::= { isisSummAddrEntry 3 }


isisSummAddrExistState OBJECT-TYPE
	SYNTAX  RowStatus
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The existence state of this summary address.  Support
		for 'createAndWait' and 'notInService' is not required.

		A row entry cannot be modified when the value of this
		object is 'active'."
	-- 1.3.6.1.2.1.138.1.1.4.1.4
	::= { isisSummAddrEntry 4 }


isisSummAddrMetric OBJECT-TYPE
	SYNTAX  IsisDefaultMetric
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The metric value to announce this summary
		address within LSPs generated by this system."
	DEFVAL { 20 }
	-- 1.3.6.1.2.1.138.1.1.4.1.5
	::= { isisSummAddrEntry 5 }


isisSummAddrFullMetric OBJECT-TYPE
	SYNTAX  IsisFullMetric
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The wide metric value to announce this summary
		address within LSPs generated by this system."
	DEFVAL { 20 }
	-- 1.3.6.1.2.1.138.1.1.4.1.6
	::= { isisSummAddrEntry 6 }


-- The Redistribution table defines addresses that should be
-- leaked from L2 to L1 if isisSysL2toL1Leaking is enabled.

isisRedistributeAddrTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF IsisRedistributeAddrEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"This table provides criteria to decide if a route should
		be leaked from L2 to L1 when Domain Wide Prefix leaking is
		enabled.

		Addresses that match the summary mask in the table MUST
		be announced at L1 by routers when isisSysL2toL1Leaking
		is enabled.  Routes that fall into the ranges specified
		are announced as is, without being summarized.  Routes
		that do not match a summary mask are not announced."
	-- 1.3.6.1.2.1.138.1.1.5
	::= { isisSystem 5 }


isisRedistributeAddrEntry OBJECT-TYPE
	SYNTAX  IsisRedistributeAddrEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Each entry contains one configured IP summary
		address to manage leaking L2 addresses into L1.

		Dynamically created rows MUST survive an agent reboot.

		Implementers need to be aware that if the total number
		of elements (octets or sub-identifiers) in
		isisRedistributeAddrAddress and
		isisRedistributeAddrPrefixLen is too great, then OIDs
		of column instances in this table will have more than
		128 subidentifiers and cannot be accessed using SNMPv1,
		SNMPv2c, or SNMPv3."
	INDEX {
		isisRedistributeAddrType,
		isisRedistributeAddrAddress,
		isisRedistributeAddrPrefixLen }
	-- 1.3.6.1.2.1.138.1.1.5.1
	::= { isisRedistributeAddrTable 1 }


IsisRedistributeAddrEntry ::= SEQUENCE {

	isisRedistributeAddrType       InetAddressType,
	isisRedistributeAddrAddress    InetAddress,
	isisRedistributeAddrPrefixLen  InetAddressPrefixLength,
	isisRedistributeAddrExistState RowStatus }


isisRedistributeAddrType OBJECT-TYPE
	SYNTAX  InetAddressType
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The Type of IP address for this summary address."
	-- 1.3.6.1.2.1.138.1.1.5.1.1
	::= { isisRedistributeAddrEntry 1 }


isisRedistributeAddrAddress OBJECT-TYPE
	SYNTAX  InetAddress
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The IP Address value for this summary address.
		The type of this address is determined by the
		value of the isisRedistributeAddrType object.
		The address must not contain any set host bits -
		bits set after the address prefix determined by
		isisRedistributeAddrPrefixLen."
	-- 1.3.6.1.2.1.138.1.1.5.1.2
	::= { isisRedistributeAddrEntry 2 }


isisRedistributeAddrPrefixLen OBJECT-TYPE
	SYNTAX  InetAddressPrefixLength
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The Length of the IP NetMask for this summary address.

		The values for the index objects
		isisRedistributeAddrAddress and
		isisRedistributeAddrPrefixLen must be consistent.
		When the value of isisRedistributeAddrAddress
		(excluding the zone index, if one is present) is x,
		then the bitwise logical-AND of x with the value of
		the mask formed from the corresponding index object
		isisRedistributeAddrPrefixLen MUST be equal to x.
		If not, then the index pair is not consistent, and an
		inconsistentName error must be returned on SET or
		CREATE requests."
	-- 1.3.6.1.2.1.138.1.1.5.1.3
	::= { isisRedistributeAddrEntry 3 }


isisRedistributeAddrExistState OBJECT-TYPE
	SYNTAX  RowStatus
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The existence state of this summary address.  Support





		for createAndWait and notInService is not required.

		A row entry cannot be modified when the value of this
		object is 'active'."
	-- 1.3.6.1.2.1.138.1.1.5.1.4
	::= { isisRedistributeAddrEntry 4 }


-- The Router Table keeps track of hostnames and router IDs
-- associated with Intermediate Systems in the area and domain.

isisRouterTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF IsisRouterEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The set of hostnames and router ID."
	-- 1.3.6.1.2.1.138.1.1.6
	::= { isisSystem 6 }


isisRouterEntry OBJECT-TYPE
	SYNTAX  IsisRouterEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Each entry tracks information about one Intermediate
		System at one level.

		Dynamically learned rows do not survive an agent reboot."
	INDEX {
		isisRouterSysID,
		isisRouterLevel }
	-- 1.3.6.1.2.1.138.1.1.6.1
	::= { isisRouterTable 1 }


IsisRouterEntry ::= SEQUENCE {

	isisRouterSysID    IsisSystemID,
	isisRouterLevel    IsisISLevel,
	isisRouterHostName SnmpAdminString,
	isisRouterID       Unsigned32 }


isisRouterSysID OBJECT-TYPE
	SYNTAX  IsisSystemID
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The System ID of the Intermediate System."
	-- 1.3.6.1.2.1.138.1.1.6.1.1
	::= { isisRouterEntry 1 }


isisRouterLevel OBJECT-TYPE
	SYNTAX  IsisISLevel
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The level at which the information about this
		Intermediate System was received."
	-- 1.3.6.1.2.1.138.1.1.6.1.2
	::= { isisRouterEntry 2 }


isisRouterHostName OBJECT-TYPE
	SYNTAX  SnmpAdminString
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The hostname listed in the LSP, or a zero-length
		string if none."
	-- 1.3.6.1.2.1.138.1.1.6.1.3
	::= { isisRouterEntry 3 }


isisRouterID OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The Router ID found in the LSP, or zero if none."
	-- 1.3.6.1.2.1.138.1.1.6.1.4
	::= { isisRouterEntry 4 }


-- The System Level Table
-- This table captures level-specific information about the system

isisSysLevelTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF IsisSysLevelEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Level specific information about the System."
	-- 1.3.6.1.2.1.138.1.2.1
	::= { isisSysLevel 1 }


isisSysLevelEntry OBJECT-TYPE
	SYNTAX  IsisSysLevelEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Each row describes variables configured for Area or Domain.

		Configured values MUST survive an agent reboot."
	INDEX {
		isisSysLevelIndex }
	-- 1.3.6.1.2.1.138.1.2.1.1
	::= { isisSysLevelTable 1 }


IsisSysLevelEntry ::= SEQUENCE {

	isisSysLevelIndex            IsisISLevel,
	isisSysLevelOrigLSPBuffSize  IsisLSPBuffSize,
	isisSysLevelMinLSPGenInt     IsisUnsigned16TC,
	isisSysLevelState            IsisLevelState,
	isisSysLevelSetOverload      TruthValue,
	isisSysLevelSetOverloadUntil Unsigned32,
	isisSysLevelMetricStyle      IsisMetricStyle,
	isisSysLevelSPFConsiders     IsisMetricStyle,
	isisSysLevelTEEnabled        TruthValue }


isisSysLevelIndex OBJECT-TYPE
	SYNTAX  IsisISLevel
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The level that this entry describes."
	-- 1.3.6.1.2.1.138.1.2.1.1.1
	::= { isisSysLevelEntry 1 }


isisSysLevelOrigLSPBuffSize OBJECT-TYPE
	SYNTAX  IsisLSPBuffSize
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"The maximum size of LSPs and SNPs originated by
		this Intermediate System at this level.  This
		object may not be modified when the isisSysAdminState
		variable is in state 'on' for this Intermediate System."
	REFERENCE
		"{ISIS.aoi originatingL1LSPBufferSize (9)}"
	DEFVAL { 1492 }
	-- 1.3.6.1.2.1.138.1.2.1.1.2
	::= { isisSysLevelEntry 2 }


isisSysLevelMinLSPGenInt OBJECT-TYPE
	SYNTAX  IsisUnsigned16TC (1..65535)
	UNITS	"seconds"
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"Minimum interval, in seconds, between successive
		generation of LSPs with the same LSPID at this level
		by this Intermediate System."
	REFERENCE
		"{ISIS.aoi minimumLSPGenerationInterval (11)}"
	DEFVAL { 30 }
	-- 1.3.6.1.2.1.138.1.2.1.1.3
	::= { isisSysLevelEntry 3 }


isisSysLevelState OBJECT-TYPE
	SYNTAX  IsisLevelState
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The state of the database at this level.
		The value 'off' indicates that IS-IS is not active at
		this level.
		The value 'on' indicates that IS-IS is active at this
		level and is not overloaded.
		The value 'waiting' indicates a database that is low on
		an essential resource, such as memory.
		The administrator may force the state to 'overloaded'
		by setting the object isisSysLevelSetOverload.
		If the state is 'waiting' or 'overloaded', we
		originate LSPs with the overload bit set."
	REFERENCE
		"{ISIS.aoi l1State (17)}"
	-- 1.3.6.1.2.1.138.1.2.1.1.4
	::= { isisSysLevelEntry 4 }


isisSysLevelSetOverload OBJECT-TYPE
	SYNTAX  TruthValue
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"Administratively set the overload bit for the level.
		The overload bit MUST continue to be set if the
		implementation runs out of memory, independent of
		this variable.  It may also be set manually independent
		of this variable, using the isisSysLevelSetOverloadUntil
		object."
	DEFVAL { false }
	-- 1.3.6.1.2.1.138.1.2.1.1.5
	::= { isisSysLevelEntry 5 }


isisSysLevelSetOverloadUntil OBJECT-TYPE
	SYNTAX  Unsigned32
	UNITS	"Seconds until clearing manually set Overload Bit"
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"If this object is non-zero, the overload bit is set at
		this level when the isisSysAdminState variable goes to
		state 'on' for this Intermediate System.  The overload bit
		remains set for isisSysLevelSetOverloadUntil seconds.
		When isisSysLevelSetOverloadUntil seconds have elapsed,
		the overload flag remains set if the implementation has
		run out of memory, or if it is set manually using the
		isisSysLevelSetOverload object.

		If isisSysLevelSetOverload is false, the system clears
		the overload bit when isisSysLevelSetOverloadUntil seconds
		have elapsed, if the system has not run out of memory."
	-- 1.3.6.1.2.1.138.1.2.1.1.6
	::= { isisSysLevelEntry 6 }


isisSysLevelMetricStyle OBJECT-TYPE
	SYNTAX  IsisMetricStyle
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"Which style of metric do we generate in our LSPs
		at this level?"
	DEFVAL { narrow }
	-- 1.3.6.1.2.1.138.1.2.1.1.7
	::= { isisSysLevelEntry 7 }


isisSysLevelSPFConsiders OBJECT-TYPE
	SYNTAX  IsisMetricStyle
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"Which style of metric do we consider in our
		SPF computation at this level?"
	DEFVAL { narrow }
	-- 1.3.6.1.2.1.138.1.2.1.1.8
	::= { isisSysLevelEntry 8 }


isisSysLevelTEEnabled OBJECT-TYPE
	SYNTAX  TruthValue
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"Do we do Traffic Engineering at this level?"
	DEFVAL { false }
	-- 1.3.6.1.2.1.138.1.2.1.1.9
	::= { isisSysLevelEntry 9 }


-- Static to provide next CircIndex

isisNextCircIndex OBJECT-TYPE
	SYNTAX  IndexIntegerNextFree
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"This object is used to assist a management
		application in creating new rows in the
		isisCircTable.  If it is possible to create
		a new instance of isisCircEntry, then this
		object will contain a non-zero value that
		is not in use as the index of any row in the
		isisCircTable.  The network manager reads the
		value of this object and then (if the
		value read is non-zero) attempts to create
		the corresponding instance of isisCircEntry.
		If the set request fails with the code
		'inconsistentValue', then the process must be
		repeated;  if the set request succeeds, then
		the agent will change the value of this object
		according to an implementation-specific
		algorithm."
	-- 1.3.6.1.2.1.138.1.3.1
	::= { isisCirc 1 }


-- The Circuit Table
-- Each broadcast or point-to-point interface on the system
-- corresponds to one entry in the Circuit table.  However, there
-- may be multiple X.25 DA circuit entries in the Circuit table
-- for a given X.25 interface.

isisCircTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF IsisCircEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The table of circuits used by this
		Intermediate System."
	-- 1.3.6.1.2.1.138.1.3.2
	::= { isisCirc 2 }


isisCircEntry OBJECT-TYPE
	SYNTAX  IsisCircEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"An isisCircEntry exists for each circuit configured
		for Integrated IS-IS on this system.

		Dynamically created rows MUST survive an agent reboot."
	INDEX {
		isisCircIndex }
	-- 1.3.6.1.2.1.138.1.3.2.1
	::= { isisCircTable 1 }


IsisCircEntry ::= SEQUENCE {

	isisCircIndex            IndexInteger,
	isisCircIfIndex          InterfaceIndex,
	isisCircAdminState       IsisAdminState,
	isisCircExistState       RowStatus,
	isisCircType             INTEGER,
	isisCircExtDomain        TruthValue,
	isisCircLevelType        IsisLevel,
	isisCircPassiveCircuit   TruthValue,
	isisCircMeshGroupEnabled INTEGER,
	isisCircMeshGroup        Unsigned32,
	isisCircSmallHellos      TruthValue,
	isisCircLastUpTime       TimeStamp,
	isisCirc3WayEnabled      TruthValue,
	isisCircExtendedCircID   Unsigned32 }


isisCircIndex OBJECT-TYPE
	SYNTAX  IndexInteger
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"An index used to uniquely identify this circuit.
		When creating a row in this table, the
		isisNextCircIndex object should be retrieved,
		and its value should be specified as the value
		of this index using a SET operation.  A retrieved
		value of zero(0) indicates that no rows can be
		created at this time."
	-- 1.3.6.1.2.1.138.1.3.2.1.1
	::= { isisCircEntry 1 }


isisCircIfIndex OBJECT-TYPE
	SYNTAX  InterfaceIndex
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The value of ifIndex for the interface to which this
		circuit corresponds.  This object cannot be modified
		after creation."
	-- 1.3.6.1.2.1.138.1.3.2.1.2
	::= { isisCircEntry 2 }


isisCircAdminState OBJECT-TYPE
	SYNTAX  IsisAdminState
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The administrative state of the circuit."
	DEFVAL { off }
	-- 1.3.6.1.2.1.138.1.3.2.1.3
	::= { isisCircEntry 3 }


isisCircExistState OBJECT-TYPE
	SYNTAX  RowStatus
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The existence state of this circuit.  Setting the state
		to 'notInService' halts the generation and processing of
		IS-IS protocol PDUs on this circuit.  Setting the state
		to destroy will also erase any configuration associated
		with the circuit.  Support for 'createAndWait' and
		'notInService' is not required.

		A row entry cannot be modified when the value of this
		object is 'active'."
	-- 1.3.6.1.2.1.138.1.3.2.1.4
	::= { isisCircEntry 4 }


isisCircType OBJECT-TYPE
	SYNTAX  INTEGER {
			broadcast(1),
			ptToPt(2),
			staticIn(3),
			staticOut(4),
			dA(5) }
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The type of the circuit.  This object follows the
		ReplaceOnlyWhileDisabled behavior.  The type specified
		must be compatible with the type of the interface defined





		by the value of isisCircIfIndex."
	REFERENCE
		"{ISIS.aoi type (33)}"
	-- 1.3.6.1.2.1.138.1.3.2.1.5
	::= { isisCircEntry 5 }


isisCircExtDomain OBJECT-TYPE
	SYNTAX  TruthValue
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"If true, suppress normal transmission of and
		interpretation of Intra-domain IS-IS PDUs on this
		circuit."
	REFERENCE
		"{ISIS.aoi externalDomain (46)}"
	DEFVAL { false }
	-- 1.3.6.1.2.1.138.1.3.2.1.6
	::= { isisCircEntry 6 }


isisCircLevelType OBJECT-TYPE
	SYNTAX  IsisLevel
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"Indicates which type of packets will be sent and
		accepted on this circuit.  The values set will be
		saved, but the values used will be modified by
		the settings of isisSysLevelType.  Thus, if the
		isisSysTpe is level2 and the isisCircLevelType
		for a circuit is level1, the circuit will not send
		or receive IS-IS packets.  This object follows the
		ReplaceOnlyWhileDisabled behavior."
	DEFVAL { level1and2 }
	-- 1.3.6.1.2.1.138.1.3.2.1.7
	::= { isisCircEntry 7 }


isisCircPassiveCircuit OBJECT-TYPE
	SYNTAX  TruthValue
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"Should we include this interface in LSPs, even if
		it is not running the IS-IS Protocol?"
	DEFVAL { false }
	-- 1.3.6.1.2.1.138.1.3.2.1.8
	::= { isisCircEntry 8 }


isisCircMeshGroupEnabled OBJECT-TYPE
	SYNTAX  INTEGER {
			inactive(1),
			blocked(2),
			set(3) }
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"Is this port a member of a mesh group, or is it
		blocked?  Circuits in the same mesh group act as a
		virtual multiaccess network.  LSPs seen on one circuit
		in a mesh group will not be flooded to another circuit
		in the same mesh group."
	REFERENCE
		"{ RFC 2973 }"
	DEFVAL { inactive }
	-- 1.3.6.1.2.1.138.1.3.2.1.9
	::= { isisCircEntry 9 }


isisCircMeshGroup OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"Circuits in the same mesh group act as a virtual
		multiaccess network.  LSPs seen on one circuit in
		a mesh group will not be flooded to another circuit
		in the same mesh group.  If isisCircMeshGroupEnabled
		is inactive or blocked, this value is ignored."
	REFERENCE
		"{ RFC 2973 }"
	-- 1.3.6.1.2.1.138.1.3.2.1.10
	::= { isisCircEntry 10 }


isisCircSmallHellos OBJECT-TYPE
	SYNTAX  TruthValue
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"Can we send unpadded hellos on LAN circuits?  False
		means the LAN Hellos must be padded.
		Implementations should allow the administrator to read
		this value.  An implementation need not be able to
		support unpadded hellos to be conformant."
	DEFVAL { false }
	-- 1.3.6.1.2.1.138.1.3.2.1.11
	::= { isisCircEntry 11 }


isisCircLastUpTime OBJECT-TYPE
	SYNTAX  TimeStamp
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"How long the circuit has been enabled, measured in
		hundredths of seconds since the last re-initialization
		of the network management subsystem; 0 if the
		circuit has never been 'on'."
	-- 1.3.6.1.2.1.138.1.3.2.1.12
	::= { isisCircEntry 12 }


isisCirc3WayEnabled OBJECT-TYPE
	SYNTAX  TruthValue
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"Is this circuit enabled to run 3Way handshake?"
	DEFVAL { true }
	-- 1.3.6.1.2.1.138.1.3.2.1.13
	::= { isisCircEntry 13 }


isisCircExtendedCircID OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The value to be used as the extended circuit ID in
		3Way handshake.  This value is only used if
		isisCirc3WayEnabled is true, and it must be unique
		across all circuits on this IS."
	-- 1.3.6.1.2.1.138.1.3.2.1.14
	::= { isisCircEntry 14 }


-- The Circuit Level Table
-- This table captures level-specific information about a circuit

isisCircLevelTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF IsisCircLevelEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Level specific information about circuits used by IS-IS."
	-- 1.3.6.1.2.1.138.1.4.1
	::= { isisCircLevelValues 1 }


isisCircLevelEntry OBJECT-TYPE
	SYNTAX  IsisCircLevelEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"An isisCircLevelEntry exists for each level on
		each circuit configured for Integrated IS-IS on
		this system.

		Configured values MUST survive an agent reboot."
	INDEX {
		isisCircIndex,
		isisCircLevelIndex }
	-- 1.3.6.1.2.1.138.1.4.1.1
	::= { isisCircLevelTable 1 }


IsisCircLevelEntry ::= SEQUENCE {

	isisCircLevelIndex            IsisISLevel,
	isisCircLevelMetric           IsisDefaultMetric,
	isisCircLevelWideMetric       IsisWideMetric,
	isisCircLevelISPriority       IsisISPriority,
	isisCircLevelIDOctet          Unsigned32,
	isisCircLevelID               IsisCircuitID,
	isisCircLevelDesIS            IsisCircuitID,
	isisCircLevelHelloMultiplier  Unsigned32,
	isisCircLevelHelloTimer       Unsigned32,
	isisCircLevelDRHelloTimer     Unsigned32,
	isisCircLevelLSPThrottle      IsisUnsigned16TC,
	isisCircLevelMinLSPRetransInt Unsigned32,
	isisCircLevelCSNPInterval     Unsigned32,
	isisCircLevelPartSNPInterval  Unsigned32 }


isisCircLevelIndex OBJECT-TYPE
	SYNTAX  IsisISLevel
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The level that this entry describes."
	-- 1.3.6.1.2.1.138.1.4.1.1.1
	::= { isisCircLevelEntry 1 }


isisCircLevelMetric OBJECT-TYPE
	SYNTAX  IsisDefaultMetric
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"The metric value of this circuit for this level."
	REFERENCE
		"{ISIS.aoi l1DefaultMetric (35)}"
	DEFVAL { 10 }
	-- 1.3.6.1.2.1.138.1.4.1.1.2
	::= { isisCircLevelEntry 2 }


isisCircLevelWideMetric OBJECT-TYPE
	SYNTAX  IsisWideMetric
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"The wide metric value of this circuit for this level."
	DEFVAL { 10 }
	-- 1.3.6.1.2.1.138.1.4.1.1.3
	::= { isisCircLevelEntry 3 }


isisCircLevelISPriority OBJECT-TYPE
	SYNTAX  IsisISPriority
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"The priority for becoming the LAN-Designated
		Intermediate System at this level."
	REFERENCE
		"{ISIS.aoi l2IntermediateSystemPriority (73)}"
	DEFVAL { 64 }
	-- 1.3.6.1.2.1.138.1.4.1.1.4
	::= { isisCircLevelEntry 4 }


isisCircLevelIDOctet OBJECT-TYPE
	SYNTAX  Unsigned32 (0..255)
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"A one-byte identifier for the circuit selected by the
		Intermediate System.

		On point-to-point circuits, the value is used as the Local
		Circuit ID in point-to-point IIH PDUs transmitted on this
		circuit.  In this case, values of isisCircLevelIDOctet do
		not need to be unique.

		For broadcast circuits, the value is used to generate the
		LAN ID that will be used if this Intermediate System is
		elected as the Designated IS on this circuit.  The value
		is required to differ on LANs where the Intermediate System
		is the Designated Intermediate System."
	-- 1.3.6.1.2.1.138.1.4.1.1.5
	::= { isisCircLevelEntry 5 }


isisCircLevelID OBJECT-TYPE
	SYNTAX  IsisCircuitID
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"On a point-to-point circuit with a fully initialized
		adjacency to a peer IS, the value of this object is
		the circuit ID negotiated during adjacency initialization.





		On a point to point circuit without such an adjacency,
		the value is the concatenation of the local system ID
		and the one-byte isisCircLevelIDOctet for this circuit,
		i.e., the value that would be proposed for the circuit ID.
		On other circuit types, the value returned is the zero-
		length OCTET STRING."
	REFERENCE
		"{ISIS.aoi ptPtCircuitID (51)}"
	-- 1.3.6.1.2.1.138.1.4.1.1.6
	::= { isisCircLevelEntry 6 }


isisCircLevelDesIS OBJECT-TYPE
	SYNTAX  IsisCircuitID
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The ID of the LAN-Designated Intermediate System
		on this circuit at this level.  If, for any reason,
		this system is not partaking in the relevant
		Designated Intermediate System election process,
		then the value returned is the zero-length OCTET STRING."
	REFERENCE
		"{ISIS.aoi l2DesignatedIntermediateSystem (75)}"
	-- 1.3.6.1.2.1.138.1.4.1.1.7
	::= { isisCircLevelEntry 7 }


isisCircLevelHelloMultiplier OBJECT-TYPE
	SYNTAX  Unsigned32 (2..100)
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"This value is multiplied by the corresponding HelloTimer,
		and the result in seconds (rounded up) is used as the
		holding time in transmitted hellos, to be used by
		receivers of hello packets from this IS."
	REFERENCE
		"{ISIS.aoi iSISHelloTimer (45)}"
	DEFVAL { 10 }
	-- 1.3.6.1.2.1.138.1.4.1.1.8
	::= { isisCircLevelEntry 8 }


isisCircLevelHelloTimer OBJECT-TYPE
	SYNTAX  Unsigned32 (10..600000)
	UNITS	"milliseconds"
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"Maximum period, in milliseconds, between IIH PDUs
		on multiaccess networks at this level for LANs.
		The value at L1 is used as the period between
		Hellos on L1L2 point-to-point circuits.  Setting
		this value at level 2 on an L1L2 point-to-point
		circuit will result in an error of InconsistentValue.






		This object follows the ResettingTimer behavior."
	REFERENCE
		"{ISIS.aoi iSISHelloTimer (45)}"
	DEFVAL { 3000 }
	-- 1.3.6.1.2.1.138.1.4.1.1.9
	::= { isisCircLevelEntry 9 }


isisCircLevelDRHelloTimer OBJECT-TYPE
	SYNTAX  Unsigned32 (10..120000)
	UNITS	"milliseconds"
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"Period, in milliseconds, between Hello PDUs on
		multiaccess networks when this IS is the Designated
		Intermediate System.  This object follows the
		ResettingTimer behavior."
	REFERENCE
		"{ISIS.aoi iSISHelloTimer (45)}"
	DEFVAL { 1000 }
	-- 1.3.6.1.2.1.138.1.4.1.1.10
	::= { isisCircLevelEntry 10 }


isisCircLevelLSPThrottle OBJECT-TYPE
	SYNTAX  IsisUnsigned16TC (1..65535)
	UNITS	"milliseconds"
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"Minimal interval of time, in milliseconds, between
		transmissions of LSPs on an interface at this level."
	REFERENCE
		"{ISIS.aoi minimumBroadcastLSPTransmissionInterval (5)}"
	DEFVAL { 30 }
	-- 1.3.6.1.2.1.138.1.4.1.1.11
	::= { isisCircLevelEntry 11 }


isisCircLevelMinLSPRetransInt OBJECT-TYPE
	SYNTAX  Unsigned32 (1..300)
	UNITS	"seconds"
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"Minimum interval, in seconds, between re-transmission of
		an LSP at this level.  This object follows the
		ResettingTimer behavior.

		Note that isisCircLevelLSPThrottle controls
		how fast we send back-to-back LSPs.  This variable
		controls how fast we re-send the same LSP."
	REFERENCE
		"{ISIS.aoi minimumLSPTransmissionInterval (5)}"
	DEFVAL { 5 }
	-- 1.3.6.1.2.1.138.1.4.1.1.12
	::= { isisCircLevelEntry 12 }


isisCircLevelCSNPInterval OBJECT-TYPE
	SYNTAX  Unsigned32 (1..600)
	UNITS	"seconds"
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"Interval of time, in seconds, between periodic
		transmission of a complete set of CSNPs on
		multiaccess networks if this router is the
		designated router at this level.
		This object follows the ResettingTimer behavior."
	REFERENCE
		"{ISIS.aoi completeSNPInterval (8)}"
	DEFVAL { 10 }
	-- 1.3.6.1.2.1.138.1.4.1.1.13
	::= { isisCircLevelEntry 13 }


isisCircLevelPartSNPInterval OBJECT-TYPE
	SYNTAX  Unsigned32 (1..120)
	UNITS	"seconds"
	MAX-ACCESS read-write
	STATUS  current
	DESCRIPTION
		"Minimum interval, in seconds, between sending Partial
		Sequence Number PDUs at this level.  This object
		follows the ResettingTimer behavior."
	REFERENCE
		"{ISIS.aoi partialSNPInterval (14)}"
	DEFVAL { 2 }
	-- 1.3.6.1.2.1.138.1.4.1.1.14
	::= { isisCircLevelEntry 14 }


-- isisSystemCounterTable keeps track of system-wide events.

isisSystemCounterTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF IsisSystemCounterEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"System-wide counters for this Intermediate System."
	-- 1.3.6.1.2.1.138.1.5.1
	::= { isisCounters 1 }


isisSystemCounterEntry OBJECT-TYPE
	SYNTAX  IsisSystemCounterEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"System-wide IS-IS counters."
	INDEX {
		isisSysStatLevel }
	-- 1.3.6.1.2.1.138.1.5.1.1
	::= { isisSystemCounterTable 1 }


IsisSystemCounterEntry ::= SEQUENCE {

	isisSysStatLevel                IsisISLevel,
	isisSysStatCorrLSPs             Counter32,
	isisSysStatAuthTypeFails        Counter32,
	isisSysStatAuthFails            Counter32,
	isisSysStatLSPDbaseOloads       Counter32,
	isisSysStatManAddrDropFromAreas Counter32,
	isisSysStatAttmptToExMaxSeqNums Counter32,
	isisSysStatSeqNumSkips          Counter32,
	isisSysStatOwnLSPPurges         Counter32,
	isisSysStatIDFieldLenMismatches Counter32,
	isisSysStatPartChanges          Counter32,
	isisSysStatSPFRuns              Counter32,
	isisSysStatLSPErrors            Counter32 }


isisSysStatLevel OBJECT-TYPE
	SYNTAX  IsisISLevel
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The level that this entry describes."
	-- 1.3.6.1.2.1.138.1.5.1.1.1
	::= { isisSystemCounterEntry 1 }


isisSysStatCorrLSPs OBJECT-TYPE
	SYNTAX  Counter32
	UNITS	"Number of corrupted in-memory frames"
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of corrupted in-memory LSPs detected.

		LSPs received from the wire with a bad checksum
		are silently dropped and are not counted.






		LSPs received from the wire with parse errors
		are counted by isisSysStatLSPErrors."
	REFERENCE
		"{ISIS.aoi corruptedLSPsDetected (19)}"
	-- 1.3.6.1.2.1.138.1.5.1.1.2
	::= { isisSystemCounterEntry 2 }


isisSysStatAuthTypeFails OBJECT-TYPE
	SYNTAX  Counter32
	UNITS	"Number of frames with authentication type mismatches"
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of authentication type mismatches recognized
		by this Intermediate System."
	-- 1.3.6.1.2.1.138.1.5.1.1.3
	::= { isisSystemCounterEntry 3 }


isisSysStatAuthFails OBJECT-TYPE
	SYNTAX  Counter32
	UNITS	"Number of frames with authentication key failures"
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of authentication key failures recognized
		by this Intermediate System."
	-- 1.3.6.1.2.1.138.1.5.1.1.4
	::= { isisSystemCounterEntry 4 }


isisSysStatLSPDbaseOloads OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of times the LSP database has become
		overloaded."
	REFERENCE
		"{ISIS.aoi lSPL1DatabaseOverloads (20)}"
	-- 1.3.6.1.2.1.138.1.5.1.1.5
	::= { isisSystemCounterEntry 5 }


isisSysStatManAddrDropFromAreas OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of times a manual address has been dropped from
		the area."
	REFERENCE
		"{ISIS.aoi manualAddressesDroppedFromArea (21)}"
	-- 1.3.6.1.2.1.138.1.5.1.1.6
	::= { isisSystemCounterEntry 6 }


isisSysStatAttmptToExMaxSeqNums OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of times the IS has attempted to exceed the
		maximum sequence number."
	REFERENCE
		"{ISIS.aoi attemptsToExceedmaximumSequenceNumber (22)}"
	-- 1.3.6.1.2.1.138.1.5.1.1.7
	::= { isisSystemCounterEntry 7 }


isisSysStatSeqNumSkips OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of times a sequence number skip has occurred."
	REFERENCE
		"{ISIS.aoi sequenceNumberSkips (23)}"
	-- 1.3.6.1.2.1.138.1.5.1.1.8
	::= { isisSystemCounterEntry 8 }


isisSysStatOwnLSPPurges OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of times a zero-aged copy of the system's own LSP
		is received from some other node."
	REFERENCE
		"{ISIS.aoi ownLSPPurges (24)}"
	-- 1.3.6.1.2.1.138.1.5.1.1.9
	::= { isisSystemCounterEntry 9 }


isisSysStatIDFieldLenMismatches OBJECT-TYPE
	SYNTAX  Counter32
	UNITS	"Number of frames with ID length mismatches"
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of times a PDU is received with a different value
		for ID field length from that of the receiving system."
	REFERENCE
		"{ISIS.aoi iDFieldLengthMismatches (25)}"
	-- 1.3.6.1.2.1.138.1.5.1.1.10
	::= { isisSystemCounterEntry 10 }


isisSysStatPartChanges OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Partition changes."
	-- 1.3.6.1.2.1.138.1.5.1.1.11
	::= { isisSystemCounterEntry 11 }


isisSysStatSPFRuns OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of times we ran SPF at this level."
	-- 1.3.6.1.2.1.138.1.5.1.1.12
	::= { isisSystemCounterEntry 12 }


isisSysStatLSPErrors OBJECT-TYPE
	SYNTAX  Counter32
	UNITS	"Number of frames with errors that we have received"
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Number of LSPs with errors we have received."
	-- 1.3.6.1.2.1.138.1.5.1.1.13
	::= { isisSystemCounterEntry 13 }


-- isisCircuitCounterTable keeps track of events
-- specific to a circuit and a level

isisCircuitCounterTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF IsisCircuitCounterEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Circuit specific counters for this
		Intermediate System."
	-- 1.3.6.1.2.1.138.1.5.2
	::= { isisCounters 2 }


isisCircuitCounterEntry OBJECT-TYPE
	SYNTAX  IsisCircuitCounterEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"An isisCircuitCounterEntry exists for each circuit
		used by Integrated IS-IS on this system."
	INDEX {
		isisCircIndex,
		isisCircuitType }
	-- 1.3.6.1.2.1.138.1.5.2.1
	::= { isisCircuitCounterTable 1 }


IsisCircuitCounterEntry ::= SEQUENCE {

	isisCircuitType               INTEGER,
	isisCircAdjChanges            Counter32,
	isisCircNumAdj                Unsigned32,
	isisCircInitFails             Counter32,
	isisCircRejAdjs               Counter32,
	isisCircIDFieldLenMismatches  Counter32,
	isisCircMaxAreaAddrMismatches Counter32,
	isisCircAuthTypeFails         Counter32,
	isisCircAuthFails             Counter32,
	isisCircLANDesISChanges       Counter32 }


isisCircuitType OBJECT-TYPE
	SYNTAX  INTEGER {
			lanlevel1(1),
			lanlevel2(2),
			p2pcircuit(3) }
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"What type of circuit saw these counts?

		The point-to-point Hello PDU includes
		both L1 and L2, and ISs form a single
		adjacency on point-to-point links.
		Thus, we combine counts on
		point-to-point links into one group."
	-- 1.3.6.1.2.1.138.1.5.2.1.1
	::= { isisCircuitCounterEntry 1 }


isisCircAdjChanges OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of times an adjacency state change has
		occurred on this circuit."
	REFERENCE
		"{ISIS.aoi changesInAdjacencyState (40)}"
	-- 1.3.6.1.2.1.138.1.5.2.1.2
	::= { isisCircuitCounterEntry 2 }


isisCircNumAdj OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of adjacencies on this circuit."
	REFERENCE
		"{ISIS.aoi changesInAdjacencyState (40)}"
	-- 1.3.6.1.2.1.138.1.5.2.1.3
	::= { isisCircuitCounterEntry 3 }


isisCircInitFails OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of times initialization of this circuit has
		failed.  This counts events such as PPP NCP failures.
		Failures to form an adjacency are counted by
		isisCircRejAdjs."
	-- 1.3.6.1.2.1.138.1.5.2.1.4
	::= { isisCircuitCounterEntry 4 }


isisCircRejAdjs OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of times an adjacency has been rejected on
		this circuit."
	REFERENCE
		"{ISIS.aoi rejectedAdjacencies (42)}"
	-- 1.3.6.1.2.1.138.1.5.2.1.5
	::= { isisCircuitCounterEntry 5 }


isisCircIDFieldLenMismatches OBJECT-TYPE
	SYNTAX  Counter32
	UNITS	"Number of frames with ID field length mismatch"
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of times an IS-IS control PDU with an ID
		field length different from that for this system has been
		received."
	REFERENCE
		"{ISIS.aoi iDFieldLengthMismatches (25)}"
	-- 1.3.6.1.2.1.138.1.5.2.1.6
	::= { isisCircuitCounterEntry 6 }


isisCircMaxAreaAddrMismatches OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of times an IS-IS control PDU with a
		max area address field different from that for this
		system has been received."
	REFERENCE
		"{ISIS.aoi iDFieldLengthMismatches (25)}"
	-- 1.3.6.1.2.1.138.1.5.2.1.7
	::= { isisCircuitCounterEntry 7 }


isisCircAuthTypeFails OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of times an IS-IS control PDU with
		an auth type field different from that for this
		system has been received."
	-- 1.3.6.1.2.1.138.1.5.2.1.8
	::= { isisCircuitCounterEntry 8 }


isisCircAuthFails OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of times an IS-IS control PDU with
		the correct auth type has failed to pass authentication
		validation."
	-- 1.3.6.1.2.1.138.1.5.2.1.9
	::= { isisCircuitCounterEntry 9 }


isisCircLANDesISChanges OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of times the Designated IS has changed
		on this circuit at this level.  If the circuit is
		point to point, this count is zero."
	-- 1.3.6.1.2.1.138.1.5.2.1.10
	::= { isisCircuitCounterEntry 10 }


-- isisPacketCounterTable keeps track of the number of IS-IS
-- control packets sent and received at each level

isisPacketCounterTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF IsisPacketCounterEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Information about IS-IS protocol traffic at one level,
		on one circuit, in one direction."
	-- 1.3.6.1.2.1.138.1.5.3
	::= { isisCounters 3 }


isisPacketCounterEntry OBJECT-TYPE
	SYNTAX  IsisPacketCounterEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Information about IS-IS protocol traffic at one level,
		on one circuit, in one direction."
	INDEX {
		isisCircIndex,
		isisPacketCountLevel,
		isisPacketCountDirection }
	-- 1.3.6.1.2.1.138.1.5.3.1
	::= { isisPacketCounterTable 1 }


IsisPacketCounterEntry ::= SEQUENCE {

	isisPacketCountLevel     IsisISLevel,
	isisPacketCountDirection INTEGER,
	isisPacketCountIIHello   Counter32,
	isisPacketCountISHello   Counter32,
	isisPacketCountESHello   Counter32,
	isisPacketCountLSP       Counter32,
	isisPacketCountCSNP      Counter32,
	isisPacketCountPSNP      Counter32,
	isisPacketCountUnknown   Counter32 }


isisPacketCountLevel OBJECT-TYPE
	SYNTAX  IsisISLevel
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The level at which these PDU counts have been collected."
	-- 1.3.6.1.2.1.138.1.5.3.1.1
	::= { isisPacketCounterEntry 1 }


isisPacketCountDirection OBJECT-TYPE
	SYNTAX  INTEGER {
			sending(1),
			receiving(2) }
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Were we sending or receiving these PDUs?"
	-- 1.3.6.1.2.1.138.1.5.3.1.2
	::= { isisPacketCounterEntry 2 }


isisPacketCountIIHello OBJECT-TYPE
	SYNTAX  Counter32
	UNITS
		"Number of IS-IS Hellos frames seen in this direction

		              at this level"
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of IS-IS Hello PDUs seen in this
		direction at this level.

		Point-to-Point IIH PDUs are counted at
		the lowest enabled level: at L1 on L1 or L1L2 circuits,
		and at L2 otherwise."
	REFERENCE
		"{ISIS.aoi iSISControlPDUsSent (43)}"
	-- 1.3.6.1.2.1.138.1.5.3.1.3
	::= { isisPacketCounterEntry 3 }


isisPacketCountISHello OBJECT-TYPE
	SYNTAX  Counter32
	UNITS
		"Number of ES-IS frames seen in this direction at

		             this level."
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of ES-IS Hello PDUs seen in this
		direction.  ISH PDUs are counted at the
		lowest enabled level: at L1 on L1 or L1L2
		circuits, and at L2 otherwise."
	-- 1.3.6.1.2.1.138.1.5.3.1.4
	::= { isisPacketCounterEntry 4 }


isisPacketCountESHello OBJECT-TYPE
	SYNTAX  Counter32
	UNITS
		"Number of ES Hello frames seen in this direction at

		             this level"
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of ES Hello PDUs seen in this
		direction.  ESH PDUs are counted at the
		lowest enabled level: at L1 on L1 or L1L2
		circuits, and at L2 otherwise."
	-- 1.3.6.1.2.1.138.1.5.3.1.5
	::= { isisPacketCounterEntry 5 }


isisPacketCountLSP OBJECT-TYPE
	SYNTAX  Counter32
	UNITS
		"Number of IS-IS LSP frames seen in this direction at

		             this level"
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of IS-IS LSPs seen in this
		direction at this level."
	REFERENCE
		"{ISIS.aoi iSISControlPDUsSent (43)}"
	-- 1.3.6.1.2.1.138.1.5.3.1.6
	::= { isisPacketCounterEntry 6 }


isisPacketCountCSNP OBJECT-TYPE
	SYNTAX  Counter32
	UNITS
		"Number of IS-IS CSNP frames seen in this direction at

		             this level"
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of IS-IS CSNPs seen in this
		direction at this level."
	REFERENCE
		"{ISIS.aoi iSISControlPDUsSent (43)}"
	-- 1.3.6.1.2.1.138.1.5.3.1.7
	::= { isisPacketCounterEntry 7 }


isisPacketCountPSNP OBJECT-TYPE
	SYNTAX  Counter32
	UNITS
		"Number of IS-IS PSNP frames seen in this direction at

		             this level"
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of IS-IS PSNPs seen in this
		direction at this level."
	REFERENCE
		"{ISIS.aoi iSISControlPDUsSent (43)}"
	-- 1.3.6.1.2.1.138.1.5.3.1.8
	::= { isisPacketCounterEntry 8 }


isisPacketCountUnknown OBJECT-TYPE
	SYNTAX  Counter32
	UNITS	"Number of unknown IS-IS frames seen at this level"
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The number of unknown IS-IS PDUs seen
		at this level."
	REFERENCE
		"{ISIS.aoi iSISControlPDUsSent (43)}"
	-- 1.3.6.1.2.1.138.1.5.3.1.9
	::= { isisPacketCounterEntry 9 }


-- The IS Adjacency Table
--
-- Each adjacency to an IS corresponds to one entry in this
-- table.

isisISAdjTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF IsisISAdjEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The table of adjacencies to Intermediate Systems."
	-- 1.3.6.1.2.1.138.1.6.1
	::= { isisISAdj 1 }


isisISAdjEntry OBJECT-TYPE
	SYNTAX  IsisISAdjEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Each entry corresponds to one adjacency to an
		Intermediate System on this system.

		Dynamically learned rows do not survive an agent reboot."
	INDEX {
		isisCircIndex,
		isisISAdjIndex }
	-- 1.3.6.1.2.1.138.1.6.1.1
	::= { isisISAdjTable 1 }


IsisISAdjEntry ::= SEQUENCE {

	isisISAdjIndex             Unsigned32,
	isisISAdjState             INTEGER,
	isisISAdj3WayState         INTEGER,
	isisISAdjNeighSNPAAddress  IsisOSINSAddress,
	isisISAdjNeighSysType      INTEGER,
	isisISAdjNeighSysID        IsisSystemID,
	isisISAdjNbrExtendedCircID Unsigned32,
	isisISAdjUsage             IsisLevel,
	isisISAdjHoldTimer         IsisUnsigned16TC,
	isisISAdjNeighPriority     IsisISPriority,
	isisISAdjLastUpTime        TimeStamp }


isisISAdjIndex OBJECT-TYPE
	SYNTAX  Unsigned32 (1..4294967295)
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"A unique value identifying the IS adjacency from all
		other such adjacencies on this circuit.  This value is
		automatically assigned by the system when the adjacency
		is created."
	-- 1.3.6.1.2.1.138.1.6.1.1.1
	::= { isisISAdjEntry 1 }


isisISAdjState OBJECT-TYPE
	SYNTAX  INTEGER {
			down(1),
			initializing(2),
			up(3),
			failed(4) }
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The state of the adjacency."
	REFERENCE
		"{ISIS.aoi adjacencyState (78)}"
	-- 1.3.6.1.2.1.138.1.6.1.1.2
	::= { isisISAdjEntry 2 }


isisISAdj3WayState OBJECT-TYPE
	SYNTAX  INTEGER {
			up(0),
			initializing(1),
			down(2),
			failed(3) }
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The 3Way state of the adjacency.  These are picked
		to match the historical on-the-wire representation
		of the 3Way state and are not intended to match
		isisISAdjState."
	REFERENCE
		"{ RFC 3373 }"
	-- 1.3.6.1.2.1.138.1.6.1.1.3
	::= { isisISAdjEntry 3 }


isisISAdjNeighSNPAAddress OBJECT-TYPE
	SYNTAX  IsisOSINSAddress
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The SNPA address of the neighboring system."
	REFERENCE
		"{ISIS.aoi neighbourSNPAAddress (79)}"
	-- 1.3.6.1.2.1.138.1.6.1.1.4
	::= { isisISAdjEntry 4 }


isisISAdjNeighSysType OBJECT-TYPE
	SYNTAX  INTEGER {
			l1IntermediateSystem(1),
			l2IntermediateSystem(2),
			l1L2IntermediateSystem(3),
			unknown(4) }
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The type of the neighboring system."
	REFERENCE
		"{ISIS.aoi neighbourSystemType (80)}"
	-- 1.3.6.1.2.1.138.1.6.1.1.5
	::= { isisISAdjEntry 5 }


isisISAdjNeighSysID OBJECT-TYPE
	SYNTAX  IsisSystemID
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The system ID of the neighboring Intermediate
		System."
	REFERENCE
		"{ISIS.aoi neighbourSystemIds (83)}"
	-- 1.3.6.1.2.1.138.1.6.1.1.6
	::= { isisISAdjEntry 6 }


isisISAdjNbrExtendedCircID OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The 4-byte Extended Circuit ID learned from the
		Neighbor during 3-way handshake, or 0."
	-- 1.3.6.1.2.1.138.1.6.1.1.7
	::= { isisISAdjEntry 7 }


isisISAdjUsage OBJECT-TYPE
	SYNTAX  IsisLevel
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"How is the adjacency used?  On a point-to-point link,
		this might be level1and2, but on a LAN, the usage will
		be level1 on the adjacency between peers at L1,
		and level2 for the adjacency between peers at L2."
	REFERENCE
		"{ISIS.aoi adjacencyUsage (82)}"
	-- 1.3.6.1.2.1.138.1.6.1.1.8
	::= { isisISAdjEntry 8 }


isisISAdjHoldTimer OBJECT-TYPE
	SYNTAX  IsisUnsigned16TC (1..65535)
	UNITS	"seconds"
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The holding time, in seconds, for this adjacency.
		This value is based on received IIH PDUs and
		the elapsed time since receipt."
	REFERENCE
		"{ISIS.aoi holdingTimer (85)}"
	-- 1.3.6.1.2.1.138.1.6.1.1.9
	::= { isisISAdjEntry 9 }


isisISAdjNeighPriority OBJECT-TYPE
	SYNTAX  IsisISPriority
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Priority of the neighboring Intermediate System for
		becoming the Designated Intermediate System."
	REFERENCE
		"{ISIS.aoi lANPriority (86)}"
	-- 1.3.6.1.2.1.138.1.6.1.1.10
	::= { isisISAdjEntry 10 }


isisISAdjLastUpTime OBJECT-TYPE
	SYNTAX  TimeStamp
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"When the adjacency most recently entered the state 'up',
		measured in hundredths of a second since the last
		re-initialization of the network management subsystem.
		Holds 0 if the adjacency has never been in state 'up'."
	-- 1.3.6.1.2.1.138.1.6.1.1.11
	::= { isisISAdjEntry 11 }


-- The IS Adjacency Area Address Table
-- The IS Adjacency Area Address Table contains the set of
-- Area Addresses of neighboring
-- Intermediate Systems as reported in IIH PDUs.

isisISAdjAreaAddrTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF IsisISAdjAreaAddrEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"This table contains the set of Area Addresses of
		neighboring Intermediate Systems as reported in received
		IIH PDUs."
	REFERENCE
		"{ISIS.aoi areaAddressesOfNeighbour (84)}"
	-- 1.3.6.1.2.1.138.1.6.2
	::= { isisISAdj 2 }


isisISAdjAreaAddrEntry OBJECT-TYPE
	SYNTAX  IsisISAdjAreaAddrEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Each entry contains one Area Address reported by a
		neighboring Intermediate System in its IIH PDUs.

		Dynamically learned rows do not survive an agent reboot."
	INDEX {
		isisCircIndex,
		isisISAdjIndex,
		isisISAdjAreaAddrIndex }
	-- 1.3.6.1.2.1.138.1.6.2.1
	::= { isisISAdjAreaAddrTable 1 }


IsisISAdjAreaAddrEntry ::= SEQUENCE {

	isisISAdjAreaAddrIndex Unsigned32,
	isisISAdjAreaAddress   IsisOSINSAddress }


isisISAdjAreaAddrIndex OBJECT-TYPE
	SYNTAX  Unsigned32 (1..4294967295)
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"An index for the areas associated with one neighbor.
		This provides a simple way to walk the table."
	-- 1.3.6.1.2.1.138.1.6.2.1.1
	::= { isisISAdjAreaAddrEntry 1 }


isisISAdjAreaAddress OBJECT-TYPE
	SYNTAX  IsisOSINSAddress
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"One Area Address as reported in IIH PDUs received from
		the neighbor."
	-- 1.3.6.1.2.1.138.1.6.2.1.2
	::= { isisISAdjAreaAddrEntry 2 }


-- The IS Adjacency IP Address Table
-- The IS Adjacency IP Address Table contains the
-- set of IP Addresses of neighboring Intermediate Systems
-- as reported in received IIH PDUs.

isisISAdjIPAddrTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF IsisISAdjIPAddrEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"This table contains the set of IP Addresses of
		neighboring Intermediate Systems as reported in received
		IIH PDUs."
	-- 1.3.6.1.2.1.138.1.6.3
	::= { isisISAdj 3 }


isisISAdjIPAddrEntry OBJECT-TYPE
	SYNTAX  IsisISAdjIPAddrEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Each entry contains one IP Address reported by a
		neighboring Intermediate System in its IIH PDUs.

		Dynamically learned rows do not survive an agent reboot."
	INDEX {
		isisCircIndex,
		isisISAdjIndex,
		isisISAdjIPAddrIndex }
	-- 1.3.6.1.2.1.138.1.6.3.1
	::= { isisISAdjIPAddrTable 1 }


IsisISAdjIPAddrEntry ::= SEQUENCE {

	isisISAdjIPAddrIndex   Unsigned32,
	isisISAdjIPAddrType    InetAddressType,
	isisISAdjIPAddrAddress InetAddress }


isisISAdjIPAddrIndex OBJECT-TYPE
	SYNTAX  Unsigned32 (1..4294967295)
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"An index to this table that identifies the IP addresses
		to which this entry belongs."
	-- 1.3.6.1.2.1.138.1.6.3.1.1
	::= { isisISAdjIPAddrEntry 1 }


isisISAdjIPAddrType OBJECT-TYPE
	SYNTAX  InetAddressType
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The type of one IP Address as reported in IIH PDUs





		received from the neighbor."
	-- 1.3.6.1.2.1.138.1.6.3.1.2
	::= { isisISAdjIPAddrEntry 2 }


isisISAdjIPAddrAddress OBJECT-TYPE
	SYNTAX  InetAddress
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"One IP Address as reported in IIH PDUs received from the
		neighbor.

		The type of this address is determined by the value of
		the isisISAdjIPAddrType object."
	-- 1.3.6.1.2.1.138.1.6.3.1.3
	::= { isisISAdjIPAddrEntry 3 }


-- The IS Adjacency Protocol Supported Table
--
-- The IS Adjacency Protocol Supported Table contains the set of
-- protocols supported by neighboring
-- Intermediate Systems as reported in received IIH PDUs.

isisISAdjProtSuppTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF IsisISAdjProtSuppEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"This table contains the set of protocols supported by
		neighboring Intermediate Systems as reported in received
		IIH PDUs."
	-- 1.3.6.1.2.1.138.1.6.4
	::= { isisISAdj 4 }


isisISAdjProtSuppEntry OBJECT-TYPE
	SYNTAX  IsisISAdjProtSuppEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Each entry contains one protocol supported by a
		neighboring Intermediate System as reported in its IIH
		PDUs.

		Dynamically learned rows do not survive an agent reboot."
	INDEX {
		isisCircIndex,
		isisISAdjIndex,
		isisISAdjProtSuppProtocol }
	-- 1.3.6.1.2.1.138.1.6.4.1
	::= { isisISAdjProtSuppTable 1 }


IsisISAdjProtSuppEntry ::= SEQUENCE {

	isisISAdjProtSuppProtocol IsisSupportedProtocol }


isisISAdjProtSuppProtocol OBJECT-TYPE
	SYNTAX  IsisSupportedProtocol
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"One supported protocol as reported in IIH PDUs received
		from the neighbor."
	-- 1.3.6.1.2.1.138.1.6.4.1.1
	::= { isisISAdjProtSuppEntry 1 }


-- The Reachable Address Group
--
-- The Reachable Address Table
-- Each entry records information about a reachable address
-- (NSAP or address prefix) manually configured on the system
-- or learned through another protocol.

isisRATable OBJECT-TYPE
	SYNTAX  SEQUENCE OF IsisRAEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The table of Reachable Addresses to NSAPs or Address
		Prefixes."
	-- 1.3.6.1.2.1.138.1.7.1
	::= { isisReachAddr 1 }


isisRAEntry OBJECT-TYPE
	SYNTAX  IsisRAEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Each entry defines a configured Reachable Address
		to an NSAP or Address Prefix.

		Dynamically created rows MUST survive an agent reboot."
	INDEX {
		isisCircIndex,
		isisRAIndex }
	-- 1.3.6.1.2.1.138.1.7.1.1
	::= { isisRATable 1 }


IsisRAEntry ::= SEQUENCE {

	isisRAIndex       Unsigned32,
	isisRAExistState  RowStatus,
	isisRAAdminState  IsisAdminState,
	isisRAAddrPrefix  IsisOSINSAddress,
	isisRAMapType     INTEGER,
	isisRAMetric      IsisDefaultMetric,
	isisRAMetricType  IsisMetricType,
	isisRASNPAAddress IsisOSINSAddress,
	isisRASNPAMask    IsisOSINSAddress,
	isisRASNPAPrefix  IsisOSINSAddress,
	isisRAType        INTEGER }


isisRAIndex OBJECT-TYPE
	SYNTAX  Unsigned32 (1..4294967295)
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The identifier for this isisRAEntry.  This value must be
		unique amongst all Reachable Addresses on the same parent
		Circuit."
	-- 1.3.6.1.2.1.138.1.7.1.1.1
	::= { isisRAEntry 1 }


isisRAExistState OBJECT-TYPE
	SYNTAX  RowStatus
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The existence state of this Reachable Address.  This
		object follows the ManualOrAutomatic behaviors.  Support
		for 'createAndWait' and 'notInService' is not required.

		A row entry cannot be modified when the value of this
		object is 'active'."
	-- 1.3.6.1.2.1.138.1.7.1.1.2
	::= { isisRAEntry 2 }


isisRAAdminState OBJECT-TYPE
	SYNTAX  IsisAdminState
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The administrative state of the Reachable Address.  This
		object follows the ManualOrAutomatic behaviors."
	DEFVAL { off }
	-- 1.3.6.1.2.1.138.1.7.1.1.3
	::= { isisRAEntry 3 }


isisRAAddrPrefix OBJECT-TYPE
	SYNTAX  IsisOSINSAddress
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The destination of this Reachable Address.  This is an
		Address Prefix.  This object follows the
		ReplaceOnlyWhileDisabled and ManualOrAutomatic
		behaviors."
	REFERENCE
		"{ISIS.aoi addressPrefix (98)}"
	-- 1.3.6.1.2.1.138.1.7.1.1.4
	::= { isisRAEntry 4 }


isisRAMapType OBJECT-TYPE
	SYNTAX  INTEGER {
			none(1),
			explicit(2),
			extractIDI(3),
			extractDSP(4) }
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The type of mapping to be employed to ascertain the SNPA
		Address that should be used in forwarding PDUs for this
		Reachable Address prefix.  This object follows the
		ManualOrAutomatic behavior.  The following values of
		mapping type are defined:

		    none: The mapping is null because the neighbor SNPA is
		          implicit by nature of the subnetwork (e.g., a
		          point-to-point linkage).

		    explicit: The subnetwork addresses in the object
		          isisRASNPAAddress are to be used.

		    extractIDI: The SNPA is embedded in the IDI of
		          the destination NSAP Address.  The mapping
		          algorithm extracts the SNPA to be used
		          according to the format and encoding rules of
		          ISO8473/Add2.  This SNPA extraction algorithm can
		          be used in conjunction with Reachable Address
		          prefixes from the X.121, F.69, E.163, and E.164





		          addressing subdomains.

		    extractDSP: All, or a suffix, of the SNPA is embedded
		          in the DSP of the destination address.  This SNPA
		          extraction algorithm extracts the embedded
		          subnetwork addressing information by performing a
		          logical AND of the isisRASNPAMask object value
		          with the destination address.  The part of the
		          SNPA extracted from the destination NSAP is
		          appended to the isisRASNPAPrefix object value to
		          form the next hop subnetwork addressing
		          information."
	REFERENCE
		"{ISO10589-ISIS.aoi mappingType (107)}"
	-- 1.3.6.1.2.1.138.1.7.1.1.5
	::= { isisRAEntry 5 }


isisRAMetric OBJECT-TYPE
	SYNTAX  IsisDefaultMetric
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The metric value for reaching the specified
		prefix over this circuit.  This object follows the
		ManualOrAutomatic behavior."
	REFERENCE
		"{ISIS.aoi DefaultMetric (99)}"
	DEFVAL { 20 }
	-- 1.3.6.1.2.1.138.1.7.1.1.6
	::= { isisRAEntry 6 }


isisRAMetricType OBJECT-TYPE
	SYNTAX  IsisMetricType
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"Indicates whether the metric is internal or
		external.  This object follows the ManualOrAutomatic
		behavior."
	REFERENCE
		"{ISIS.aoi DefaultMetricType (103)}"
	DEFVAL { internal }
	-- 1.3.6.1.2.1.138.1.7.1.1.7
	::= { isisRAEntry 7 }


isisRASNPAAddress OBJECT-TYPE
	SYNTAX  IsisOSINSAddress
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The SNPA Address to which a PDU may be forwarded in
		order to reach a destination that matches the address
		prefix of the Reachable Address.  This object follows the





		ManualOrAutomatic behavior."
	REFERENCE
		"{ISIS.aoi sNPAAddresses (109)}"
	DEFVAL { ''H }
	-- 1.3.6.1.2.1.138.1.7.1.1.8
	::= { isisRAEntry 8 }


isisRASNPAMask OBJECT-TYPE
	SYNTAX  IsisOSINSAddress
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"A bit mask with 1 bit indicating the positions in the
		effective destination address from which embedded SNPA
		information is to be extracted.  For the extraction, the
		first octet of the isisRASNPAMask object value is aligned
		with the first octet (AFI) of the NSAP Address.  If the
		isisRASNPAMask object value and NSAP Address are of
		different lengths, the shorter of the two is logically
		padded with zeros before performing the extraction.  This
		object follows the ManualOrAutomatic behavior."
	REFERENCE
		"{ISIS.aoi sNPAMask (122)}"
	DEFVAL { '00'H }
	-- 1.3.6.1.2.1.138.1.7.1.1.9
	::= { isisRAEntry 9 }


isisRASNPAPrefix OBJECT-TYPE
	SYNTAX  IsisOSINSAddress
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"A fixed SNPA prefix for use when the isisRAMapType is
		extractDSP.  The SNPA Address to use is formed by
		concatenating the fixed SNPA prefix with a variable SNPA
		part that is extracted from the effective destination
		address.  For Reachable Address prefixes in which the
		entire SNPA is embedded in the DSP, the SNPA Prefix shall
		be null.  This object follows the ManualOrAutomatic
		behavior."
	REFERENCE
		"{ISIS.aoi sNPAPrefix (123)}"
	DEFVAL { '00'H }
	-- 1.3.6.1.2.1.138.1.7.1.1.10
	::= { isisRAEntry 10 }


isisRAType OBJECT-TYPE
	SYNTAX  INTEGER {
			manual(1),
			automatic(2) }
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The type of Reachable address.  Those of type
		manual are created by the network manager.  Those
		of type automatic are created through propagation
		of routing information from another routing
		protocol (e.g., IDRP)."
	DEFVAL { manual }
	-- 1.3.6.1.2.1.138.1.7.1.1.11
	::= { isisRAEntry 11 }


-- The IP Reachable Address Table
-- Each entry records information about one IP reachable
-- address manually configured on this system or learned from
-- another protocol.

isisIPRATable OBJECT-TYPE
	SYNTAX  SEQUENCE OF IsisIPRAEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The table of IP Reachable Addresses to networks,
		subnetworks, or hosts either manually configured or
		learned from another protocol."
	-- 1.3.6.1.2.1.138.1.8.1
	::= { isisIPReachAddr 1 }


isisIPRAEntry OBJECT-TYPE
	SYNTAX  IsisIPRAEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Each entry defines an IP Reachable Address to a network,
		subnetwork, or host.

		Each IP Reachable Address may have multiple entries in the
		table, one for each equal cost path to the reachable
		address.

		Dynamically created rows MUST survive an agent reboot.

		Implementers need to be aware that if the total number
		of elements (octets or sub-identifiers) in
		isisIPRADestr, isisIPRADestPrefixLen, and
		isisIPRANextHopIndex is too great, then OIDs of column
		instances in this table will have more than 128
		subidentifiers and cannot be accessed using SNMPv1,





		SNMPv2c, or SNMPv3."
	INDEX {
		isisSysLevelIndex,
		isisIPRADestType,
		isisIPRADest,
		isisIPRADestPrefixLen,
		isisIPRANextHopIndex }
	-- 1.3.6.1.2.1.138.1.8.1.1
	::= { isisIPRATable 1 }


IsisIPRAEntry ::= SEQUENCE {

	isisIPRADestType      InetAddressType,
	isisIPRADest          InetAddress,
	isisIPRADestPrefixLen InetAddressPrefixLength,
	isisIPRANextHopIndex  Unsigned32,
	isisIPRANextHopType   InetAddressType,
	isisIPRANextHop       InetAddress,
	isisIPRAType          INTEGER,
	isisIPRAExistState    RowStatus,
	isisIPRAAdminState    IsisAdminState,
	isisIPRAMetric        IsisDefaultMetric,
	isisIPRAMetricType    IsisMetricType,
	isisIPRAFullMetric    IsisFullMetric,
	isisIPRASNPAAddress   IsisOSINSAddress,
	isisIPRASourceType    INTEGER }


isisIPRADestType OBJECT-TYPE
	SYNTAX  InetAddressType
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The type of this IP Reachable Address."
	-- 1.3.6.1.2.1.138.1.8.1.1.1
	::= { isisIPRAEntry 1 }


isisIPRADest OBJECT-TYPE
	SYNTAX  InetAddress
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The destination of this IP Reachable Address.  This is
		a network address, subnetwork address, or host
		address.

		The type of this address is determined by the value of
		the isisIPRADestType object."
	-- 1.3.6.1.2.1.138.1.8.1.1.2
	::= { isisIPRAEntry 2 }


isisIPRADestPrefixLen OBJECT-TYPE
	SYNTAX  InetAddressPrefixLength
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The length of the IP Netmask for Reachability Address.

		The values for the index objects isisIPRADest and
		isisIPRADestPrefixLen must be consistent.  When the value
		of isisIPRADest (excluding the zone index, if one
		is present) is x, then the bitwise logical-AND
		of x with the value of the mask formed from the
		corresponding index object isisIPRADestPrefixLen MUST be
		equal to x.  If not, then the index pair is not
		consistent, and an inconsistentName error must be
		returned on SET or CREATE requests."
	-- 1.3.6.1.2.1.138.1.8.1.1.3
	::= { isisIPRAEntry 3 }


isisIPRANextHopIndex OBJECT-TYPE
	SYNTAX  Unsigned32 (1..4294967295)
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Index of next hop.  Used when there are multiple Equal
		Cost Multipath alternatives for the same destination."
	-- 1.3.6.1.2.1.138.1.8.1.1.4
	::= { isisIPRAEntry 4 }


isisIPRANextHopType OBJECT-TYPE
	SYNTAX  InetAddressType
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The type of the IP next hop address."
	-- 1.3.6.1.2.1.138.1.8.1.1.5
	::= { isisIPRAEntry 5 }


isisIPRANextHop OBJECT-TYPE
	SYNTAX  InetAddress
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The IP next hop to this destination.

		The type of this address is determined by the value of
		the isisIPRANextHopType object."
	-- 1.3.6.1.2.1.138.1.8.1.1.6
	::= { isisIPRAEntry 6 }


isisIPRAType OBJECT-TYPE
	SYNTAX  INTEGER {
			manual(1),
			automatic(2) }
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The type of this IP Reachable Address.  Those of type
		manual are created by the network manager.  Those of type
		automatic are created through propagation of routing
		information from another routing protocol.  This object
		follows the ManualOrAutomatic behavior."
	-- 1.3.6.1.2.1.138.1.8.1.1.7
	::= { isisIPRAEntry 7 }


isisIPRAExistState OBJECT-TYPE
	SYNTAX  RowStatus
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The state of this IP Reachable Address.  This object
		follows the ExistenceState and ManualOrAutomatic
		behaviors.  Support for 'createAndWait' and
		'notInService' is not required.

		A row entry cannot be modified when the value of this
		object is 'active'."
	-- 1.3.6.1.2.1.138.1.8.1.1.8
	::= { isisIPRAEntry 8 }


isisIPRAAdminState OBJECT-TYPE
	SYNTAX  IsisAdminState
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The administrative state of the IP Reachable Address.  This
		object follows the IsisAdminState and ManualOrAutomatic





		behaviors."
	DEFVAL { off }
	-- 1.3.6.1.2.1.138.1.8.1.1.9
	::= { isisIPRAEntry 9 }


isisIPRAMetric OBJECT-TYPE
	SYNTAX  IsisDefaultMetric
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The metric value for reaching the specified
		destination over this circuit.  This object follows the
		ManualOrAutomatic behavior."
	DEFVAL { 10 }
	-- 1.3.6.1.2.1.138.1.8.1.1.10
	::= { isisIPRAEntry 10 }


isisIPRAMetricType OBJECT-TYPE
	SYNTAX  IsisMetricType
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"Indicates whether the metric is internal or
		external.  This object follows the ManualOrAutomatic
		behavior."
	DEFVAL { internal }
	-- 1.3.6.1.2.1.138.1.8.1.1.11
	::= { isisIPRAEntry 11 }


isisIPRAFullMetric OBJECT-TYPE
	SYNTAX  IsisFullMetric
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The wide metric value for reaching the specified
		destination over this circuit.  This object follows the
		ManualOrAutomatic behavior."
	DEFVAL { 10 }
	-- 1.3.6.1.2.1.138.1.8.1.1.12
	::= { isisIPRAEntry 12 }


isisIPRASNPAAddress OBJECT-TYPE
	SYNTAX  IsisOSINSAddress
	MAX-ACCESS read-create
	STATUS  current
	DESCRIPTION
		"The SNPA Address to which a PDU may be forwarded in
		order to reach a destination that matches this IP
		Reachable Address.  This object follows the
		ManualOrAutomatic behavior."
	DEFVAL { ''H }
	-- 1.3.6.1.2.1.138.1.8.1.1.13
	::= { isisIPRAEntry 13 }


isisIPRASourceType OBJECT-TYPE
	SYNTAX  INTEGER {
			static(1),
			direct(2),
			ospfv2(3),
			ospfv3(4),
			isis(5),
			rip(6),
			igrp(7),
			eigrp(8),
			bgp(9),
			other(10) }
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The origin of this route."
	-- 1.3.6.1.2.1.138.1.8.1.1.14
	::= { isisIPRAEntry 14 }


-- The LSP Database Table
--
-- The first table provides Summary Information about LSPs
-- The next table provides a complete record

isisLSPSummaryTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF IsisLSPSummaryEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The table of LSP Headers."
	-- 1.3.6.1.2.1.138.1.9.1
	::= { isisLSPDataBase 1 }


isisLSPSummaryEntry OBJECT-TYPE
	SYNTAX  IsisLSPSummaryEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Each entry provides a summary describing an
		LSP currently stored in the system.

		Dynamically learned rows will not survive an
		agent reboot."
	INDEX {
		isisLSPLevel,
		isisLSPID }
	-- 1.3.6.1.2.1.138.1.9.1.1
	::= { isisLSPSummaryTable 1 }


IsisLSPSummaryEntry ::= SEQUENCE {

	isisLSPLevel          IsisISLevel,
	isisLSPID             IsisLinkStatePDUID,
	isisLSPSeq            Unsigned32,
	isisLSPZeroLife       TruthValue,
	isisLSPChecksum       IsisUnsigned16TC,
	isisLSPLifetimeRemain IsisUnsigned16TC,
	isisLSPPDULength      IsisUnsigned16TC,
	isisLSPAttributes     IsisUnsigned8TC }


isisLSPLevel OBJECT-TYPE
	SYNTAX  IsisISLevel
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"At which level does this LSP appear?"
	-- 1.3.6.1.2.1.138.1.9.1.1.1
	::= { isisLSPSummaryEntry 1 }


isisLSPID OBJECT-TYPE
	SYNTAX  IsisLinkStatePDUID
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The 8-byte LSP ID for this Link State PDU."
	-- 1.3.6.1.2.1.138.1.9.1.1.2
	::= { isisLSPSummaryEntry 2 }


isisLSPSeq OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The sequence number for this LSP."
	-- 1.3.6.1.2.1.138.1.9.1.1.3
	::= { isisLSPSummaryEntry 3 }


isisLSPZeroLife OBJECT-TYPE
	SYNTAX  TruthValue
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Is this LSP being purged by this system?"
	-- 1.3.6.1.2.1.138.1.9.1.1.4
	::= { isisLSPSummaryEntry 4 }


isisLSPChecksum OBJECT-TYPE
	SYNTAX  IsisUnsigned16TC
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The 16-bit Fletcher Checksum for this LSP."
	-- 1.3.6.1.2.1.138.1.9.1.1.5
	::= { isisLSPSummaryEntry 5 }


isisLSPLifetimeRemain OBJECT-TYPE
	SYNTAX  IsisUnsigned16TC
	UNITS	"seconds"
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The remaining lifetime, in seconds, for this LSP."
	-- 1.3.6.1.2.1.138.1.9.1.1.6
	::= { isisLSPSummaryEntry 6 }


isisLSPPDULength OBJECT-TYPE
	SYNTAX  IsisUnsigned16TC
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The length of this LSP."
	-- 1.3.6.1.2.1.138.1.9.1.1.7
	::= { isisLSPSummaryEntry 7 }


isisLSPAttributes OBJECT-TYPE
	SYNTAX  IsisUnsigned8TC
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"Flags carried by the LSP."
	-- 1.3.6.1.2.1.138.1.9.1.1.8
	::= { isisLSPSummaryEntry 8 }


-- LSP Table
--
-- The full LSP as a sequence of {Type, Len, Value} tuples
-- Since the underlying LSP may have changed while downloading
-- TLVs, we provide the Sequence number and Checksum for each
-- LSP TLV, so the network manager may verify that they are
-- still working on the same version of the LSP.

isisLSPTLVTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF IsisLSPTLVEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The table of LSPs in the database."
	-- 1.3.6.1.2.1.138.1.9.2
	::= { isisLSPDataBase 2 }


isisLSPTLVEntry OBJECT-TYPE
	SYNTAX  IsisLSPTLVEntry
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"Each entry describes a TLV within
		an LSP currently stored in the system.

		Dynamically learned rows will not survive an
		agent reboot."
	INDEX {
		isisLSPLevel,
		isisLSPID,
		isisLSPTLVIndex }
	-- 1.3.6.1.2.1.138.1.9.2.1
	::= { isisLSPTLVTable 1 }


IsisLSPTLVEntry ::= SEQUENCE {

	isisLSPTLVIndex    Unsigned32,
	isisLSPTLVSeq      Unsigned32,
	isisLSPTLVChecksum IsisUnsigned16TC,
	isisLSPTLVType     IsisUnsigned8TC,
	isisLSPTLVLen      IsisUnsigned8TC,
	isisLSPTLVValue    OCTET STRING }


isisLSPTLVIndex OBJECT-TYPE
	SYNTAX  Unsigned32 (1..4294967295)
	MAX-ACCESS not-accessible
	STATUS  current
	DESCRIPTION
		"The index of this TLV in the LSP.  The first TLV has
		index 1, and the Nth TLV has an index of N."
	-- 1.3.6.1.2.1.138.1.9.2.1.1
	::= { isisLSPTLVEntry 1 }


isisLSPTLVSeq OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The sequence number for this LSP."
	-- 1.3.6.1.2.1.138.1.9.2.1.2
	::= { isisLSPTLVEntry 2 }


isisLSPTLVChecksum OBJECT-TYPE
	SYNTAX  IsisUnsigned16TC
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The 16-bit Fletcher Checksum for this LSP."
	-- 1.3.6.1.2.1.138.1.9.2.1.3
	::= { isisLSPTLVEntry 3 }


isisLSPTLVType OBJECT-TYPE
	SYNTAX  IsisUnsigned8TC
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The type of this TLV."
	-- 1.3.6.1.2.1.138.1.9.2.1.4
	::= { isisLSPTLVEntry 4 }


isisLSPTLVLen OBJECT-TYPE
	SYNTAX  IsisUnsigned8TC
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The length of this TLV."
	-- 1.3.6.1.2.1.138.1.9.2.1.5
	::= { isisLSPTLVEntry 5 }


isisLSPTLVValue OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE (0..255))
	MAX-ACCESS read-only
	STATUS  current
	DESCRIPTION
		"The value of this TLV."
	-- 1.3.6.1.2.1.138.1.9.2.1.6
	::= { isisLSPTLVEntry 6 }


-- The IS-IS Notification Table
-- The IS-IS Notification Table records fields that are
-- required for notifications

isisNotificationEntry OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.138.1.10.1
	::= { isisNotification 1 }

isisNotificationSysLevelIndex OBJECT-TYPE
	SYNTAX  IsisLevel
	MAX-ACCESS accessible-for-notify
	STATUS  current
	DESCRIPTION
		"The system level for this notification."
	-- 1.3.6.1.2.1.138.1.10.1.1
	::= { isisNotificationEntry 1 }


isisNotificationCircIfIndex OBJECT-TYPE
	SYNTAX  Unsigned32 (1..2147483647)
	MAX-ACCESS accessible-for-notify
	STATUS  current
	DESCRIPTION
		"The identifier of this circuit relevant to
		this notification."
	-- 1.3.6.1.2.1.138.1.10.1.2
	::= { isisNotificationEntry 2 }


isisPduLspId OBJECT-TYPE
	SYNTAX  IsisLinkStatePDUID
	MAX-ACCESS accessible-for-notify
	STATUS  current
	DESCRIPTION
		"An Octet String that uniquely identifies
		a Link State PDU."
	-- 1.3.6.1.2.1.138.1.10.1.3
	::= { isisNotificationEntry 3 }


isisPduFragment OBJECT-TYPE
	SYNTAX  IsisPDUHeader
	MAX-ACCESS accessible-for-notify
	STATUS  current
	DESCRIPTION
		"Holds up to 64 initial bytes of a PDU that
		triggered the notification."
	-- 1.3.6.1.2.1.138.1.10.1.4
	::= { isisNotificationEntry 4 }


isisPduFieldLen OBJECT-TYPE
	SYNTAX  IsisUnsigned8TC
	MAX-ACCESS accessible-for-notify
	STATUS  current
	DESCRIPTION
		"Holds the System ID length reported in PDU we received."
	-- 1.3.6.1.2.1.138.1.10.1.5
	::= { isisNotificationEntry 5 }


isisPduMaxAreaAddress OBJECT-TYPE
	SYNTAX  IsisUnsigned8TC
	MAX-ACCESS accessible-for-notify
	STATUS  current
	DESCRIPTION
		"Holds the Max Area Addresses reported in a PDU
		we received."
	-- 1.3.6.1.2.1.138.1.10.1.6
	::= { isisNotificationEntry 6 }


isisPduProtocolVersion OBJECT-TYPE
	SYNTAX  IsisUnsigned8TC
	MAX-ACCESS accessible-for-notify
	STATUS  current
	DESCRIPTION
		"Holds the Protocol version reported in PDU we received."
	-- 1.3.6.1.2.1.138.1.10.1.7
	::= { isisNotificationEntry 7 }


isisPduLspSize OBJECT-TYPE
	SYNTAX  Unsigned32 (0..2147483647)
	MAX-ACCESS accessible-for-notify
	STATUS  current
	DESCRIPTION
		"Holds the size of LSP we received that is too
		big to forward."
	-- 1.3.6.1.2.1.138.1.10.1.8
	::= { isisNotificationEntry 8 }


isisPduOriginatingBufferSize OBJECT-TYPE
	SYNTAX  IsisUnsigned16TC (0..16000)
	MAX-ACCESS accessible-for-notify
	STATUS  current
	DESCRIPTION
		"Holds the size of isisSysLevelOrigLSPBuffSize advertised
		by the peer in the originatingLSPBufferSize TLV.
		If the peer does not advertise this TLV, this
		value is set to 0."
	-- 1.3.6.1.2.1.138.1.10.1.9
	::= { isisNotificationEntry 9 }


isisPduBufferSize OBJECT-TYPE
	SYNTAX  IsisUnsigned16TC (0..16000)
	MAX-ACCESS accessible-for-notify
	STATUS  current
	DESCRIPTION
		"Holds the size of LSP received from peer."
	-- 1.3.6.1.2.1.138.1.10.1.10
	::= { isisNotificationEntry 10 }


isisPduProtocolsSupported OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE (0..255))
	MAX-ACCESS accessible-for-notify
	STATUS  current
	DESCRIPTION
		"The list of protocols supported by an
		adjacent system.  This may be empty."
	-- 1.3.6.1.2.1.138.1.10.1.11
	::= { isisNotificationEntry 11 }


isisAdjState OBJECT-TYPE
	SYNTAX  INTEGER {
			down(1),
			initializing(2),
			up(3),
			failed(4) }
	MAX-ACCESS accessible-for-notify
	STATUS  current
	DESCRIPTION
		"The current state of an adjacency."
	-- 1.3.6.1.2.1.138.1.10.1.12
	::= { isisNotificationEntry 12 }


isisErrorOffset OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS accessible-for-notify
	STATUS  current
	DESCRIPTION
		"An offset to a problem in a PDU.  If the problem
		is a malformed TLV, this points to the beginning
		of the TLV.  If the problem is in the header, this
		points to the byte that is suspicious."
	-- 1.3.6.1.2.1.138.1.10.1.13
	::= { isisNotificationEntry 13 }


isisErrorTLVType OBJECT-TYPE
	SYNTAX  Unsigned32 (0..255)
	MAX-ACCESS accessible-for-notify
	STATUS  current
	DESCRIPTION
		"The type for a malformed TLV."
	-- 1.3.6.1.2.1.138.1.10.1.14
	::= { isisNotificationEntry 14 }


isisNotificationAreaAddress OBJECT-TYPE
	SYNTAX  IsisOSINSAddress
	MAX-ACCESS accessible-for-notify
	STATUS  current
	DESCRIPTION
		"An Area Address."
	-- 1.3.6.1.2.1.138.1.10.1.15
	::= { isisNotificationEntry 15 }



-- Notification definitions
--
-- Note that notifications can be disabled by setting
--     isisSysNotificationEnable false

isisDatabaseOverload NOTIFICATION-TYPE
	OBJECTS {
		isisNotificationSysLevelIndex,
		isisSysLevelState}
	STATUS  current
	DESCRIPTION
		"This notification is generated when the system
		enters or leaves the Overload state.  The number
		of times this has been generated and cleared is kept
		track of by isisSysStatLSPDbaseOloads."
	-- 1.3.6.1.2.1.138.0.1
	::= { isisNotifications 1 }


isisManualAddressDrops NOTIFICATION-TYPE
	OBJECTS {
		isisNotificationAreaAddress}
	STATUS  current
	DESCRIPTION
		"This notification is generated when one of the
		manual areaAddresses assigned to this system is
		ignored when computing routes.  The object
		isisNotificationAreaAddress describes the area that
		has been dropped.

		The number of times this event has been generated
		is counted by isisSysStatManAddrDropFromAreas.

		The agent must throttle the generation of
		consecutive isisManualAddressDrops notifications
		so that there is at least a 5-second gap between
		notifications of this type.  When notifications
		are throttled, they are dropped, not queued for
		sending at a future time."
	-- 1.3.6.1.2.1.138.0.2
	::= { isisNotifications 2 }


isisCorruptedLSPDetected NOTIFICATION-TYPE
	OBJECTS {
		isisNotificationSysLevelIndex,
		isisPduLspId}
	STATUS  current
	DESCRIPTION
		"This notification is generated when we find that
		an LSP that was stored in memory has become
		corrupted.  The number of times this has been
		generated is counted by isisSysCorrLSPs.

		We forward an LSP ID.  We may have independent
		knowledge of the ID, but in some implementations
		there is a chance that the ID itself will be
		corrupted."
	-- 1.3.6.1.2.1.138.0.3
	::= { isisNotifications 3 }


isisAttemptToExceedMaxSequence NOTIFICATION-TYPE
	OBJECTS {
		isisNotificationSysLevelIndex,
		isisPduLspId}
	STATUS  current
	DESCRIPTION
		"When the sequence number on an LSP we generate
		wraps the 32-bit sequence counter, we purge and
		wait to re-announce this information.  This
		notification describes that event.  Since these
		should not be generated rapidly, we generate
		an event each time this happens.

		While the first 6 bytes of the LSPID are ours,
		the other two contain useful information."
	-- 1.3.6.1.2.1.138.0.4
	::= { isisNotifications 4 }


isisIDLenMismatch NOTIFICATION-TYPE
	OBJECTS {
		isisNotificationSysLevelIndex,
		isisPduFieldLen,
		isisNotificationCircIfIndex,
		isisPduFragment}
	STATUS  current
	DESCRIPTION
		"A notification sent when we receive a PDU
		with a different value for the System ID Length.
		This notification includes an index to identify
		the circuit where we saw the PDU and the header of
		the PDU, which may help a network manager identify
		the source of the confusion.

		The agent must throttle the generation of
		consecutive isisIDLenMismatch notifications
		so that there is at least a 5-second gap between
		notifications of this type.  When notifications
		are throttled, they are dropped, not queued for
		sending at a future time."
	-- 1.3.6.1.2.1.138.0.5
	::= { isisNotifications 5 }


isisMaxAreaAddressesMismatch NOTIFICATION-TYPE
	OBJECTS {
		isisNotificationSysLevelIndex,
		isisPduMaxAreaAddress,
		isisNotificationCircIfIndex,
		isisPduFragment}
	STATUS  current
	DESCRIPTION
		"A notification sent when we receive a PDU
		with a different value for the Maximum Area
		Addresses.  This notification includes the
		header of the packet, which may help a
		network manager identify the source of the
		confusion.

		The agent must throttle the generation of
		consecutive isisMaxAreaAddressesMismatch
		notifications so that there is at least a 5-second
		gap between notifications of this type.  When
		notifications are throttled, they are dropped, not
		queued for sending at a future time."
	-- 1.3.6.1.2.1.138.0.6
	::= { isisNotifications 6 }


isisOwnLSPPurge NOTIFICATION-TYPE
	OBJECTS {
		isisNotificationSysLevelIndex,
		isisNotificationCircIfIndex,
		isisPduLspId}
	STATUS  current
	DESCRIPTION
		"A notification sent when we receive a PDU
		with our systemID and zero age.  This
		notification includes the circuit Index
		and router ID from the LSP, if available,
		which may help a network manager
		identify the source of the confusion."
	-- 1.3.6.1.2.1.138.0.7
	::= { isisNotifications 7 }


isisSequenceNumberSkip NOTIFICATION-TYPE
	OBJECTS {
		isisNotificationSysLevelIndex,
		isisNotificationCircIfIndex,
		isisPduLspId}
	STATUS  current
	DESCRIPTION
		"When we receive an LSP with our System ID
		and different contents, we may need to reissue
		the LSP with a higher sequence number.

		We send this notification if we need to increase
		the sequence number by more than one.  If two
		Intermediate Systems are configured with the same
		System ID, this notification will fire."
	-- 1.3.6.1.2.1.138.0.8
	::= { isisNotifications 8 }


isisAuthenticationTypeFailure NOTIFICATION-TYPE
	OBJECTS {
		isisNotificationSysLevelIndex,
		isisNotificationCircIfIndex,
		isisPduFragment}
	STATUS  current
	DESCRIPTION
		"A notification sent when we receive a PDU
		with the wrong authentication type field.
		This notification includes the header of the
		packet, which may help a network manager
		identify the source of the confusion.

		The agent must throttle the generation of
		consecutive isisAuthenticationTypeFailure
		notifications so that there is at least a 5-second
		gap between notifications of this type.  When
		notifications are throttled, they are dropped, not
		queued for sending at a future time."
	-- 1.3.6.1.2.1.138.0.9
	::= { isisNotifications 9 }


isisAuthenticationFailure NOTIFICATION-TYPE
	OBJECTS {
		isisNotificationSysLevelIndex,
		isisNotificationCircIfIndex,
		isisPduFragment}
	STATUS  current
	DESCRIPTION
		"A notification sent when we receive a PDU
		with an incorrect authentication information
		field.  This notification includes the header
		of the packet, which may help a network manager
		identify the source of the confusion.





		The agent must throttle the generation of
		consecutive isisAuthenticationFailure
		notifications so that there is at least a 5-second
		gap between notifications of this type.  When
		notifications are throttled, they are dropped, not
		queued for sending at a future time."
	-- 1.3.6.1.2.1.138.0.10
	::= { isisNotifications 10 }


isisVersionSkew NOTIFICATION-TYPE
	OBJECTS {
		isisNotificationSysLevelIndex,
		isisNotificationCircIfIndex,
		isisPduProtocolVersion,
		isisPduFragment}
	STATUS  current
	DESCRIPTION
		"A notification sent when we receive a Hello
		PDU from an IS running a different version
		of the protocol.  This notification includes
		the header of the packet, which may help a
		network manager identify the source of the
		confusion.

		The agent must throttle the generation of
		consecutive isisVersionSkew notifications
		so that there is at least a 5-second gap
		between notifications of this type.  When
		notifications are throttled, they are dropped, not
		queued for sending at a future time."
	-- 1.3.6.1.2.1.138.0.11
	::= { isisNotifications 11 }


isisAreaMismatch NOTIFICATION-TYPE
	OBJECTS {
		isisNotificationCircIfIndex,
		isisPduFragment}
	STATUS  current
	DESCRIPTION
		"A notification sent when we receive a Hello
		PDU from an IS that does not share any
		area address.  This notification includes
		the header of the packet, which may help a
		network manager identify the source of the
		confusion.






		The agent must throttle the generation of
		consecutive isisAreaMismatch notifications
		so that there is at least a 5-second gap
		between notifications of this type.  When
		notifications are throttled, they are dropped, not
		queued for sending at a future time."
	-- 1.3.6.1.2.1.138.0.12
	::= { isisNotifications 12 }


isisRejectedAdjacency NOTIFICATION-TYPE
	OBJECTS {
		isisNotificationSysLevelIndex,
		isisNotificationCircIfIndex,
		isisPduFragment}
	STATUS  current
	DESCRIPTION
		"A notification sent when we receive a Hello
		PDU from an IS but do not establish an
		adjacency for some reason.

		The agent must throttle the generation of
		consecutive isisRejectedAdjacency notifications
		so that there is at least a 5-second gap
		between notifications of this type.  When
		notifications are throttled, they are dropped, not
		queued for sending at a future time."
	-- 1.3.6.1.2.1.138.0.13
	::= { isisNotifications 13 }


isisLSPTooLargeToPropagate NOTIFICATION-TYPE
	OBJECTS {
		isisNotificationSysLevelIndex,
		isisNotificationCircIfIndex,
		isisPduLspSize,
		isisPduLspId}
	STATUS  current
	DESCRIPTION
		"A notification sent when we attempt to propagate
		an LSP that is larger than the dataLinkBlockSize
		for the circuit.

		The agent must throttle the generation of
		consecutive isisLSPTooLargeToPropagate notifications
		so that there is at least a 5-second gap
		between notifications of this type.  When
		notifications are throttled, they are dropped, not





		queued for sending at a future time."
	-- 1.3.6.1.2.1.138.0.14
	::= { isisNotifications 14 }


isisOrigLSPBuffSizeMismatch NOTIFICATION-TYPE
	OBJECTS {
		isisNotificationSysLevelIndex,
		isisNotificationCircIfIndex,
		isisPduLspId,
		isisPduOriginatingBufferSize,
		isisPduBufferSize}
	STATUS  current
	DESCRIPTION
		"A notification sent when a Level 1 LSP or Level
		2 LSP is received that is larger than the local
		value for isisSysLevelOrigLSPBuffSize, or when an
		LSP is received that contains the supported Buffer Size
		option and the value in the PDU option field does
		not match the local value for isisSysLevelOrigLSPBuffSize.
		We pass up the size from the option field and the
		size of the LSP when one of them exceeds our configuration.

		The agent must throttle the generation of
		consecutive isisOrigLSPBuffSizeMismatch notifications
		so that there is at least a 5-second gap
		between notifications of this type.  When
		notifications are throttled, they are dropped, not
		queued for sending at a future time."
	-- 1.3.6.1.2.1.138.0.15
	::= { isisNotifications 15 }


isisProtocolsSupportedMismatch NOTIFICATION-TYPE
	OBJECTS {
		isisNotificationSysLevelIndex,
		isisNotificationCircIfIndex,
		isisPduProtocolsSupported,
		isisPduLspId,
		isisPduFragment}
	STATUS  current
	DESCRIPTION
		"A notification sent when a non-pseudonode
		segment 0 LSP is received that has no matching
		protocols supported.  This may be because the system
		does not generate the field, or because there are no
		common elements.  The list of protocols supported
		should be included in the notification: it may be





		empty if the TLV is not supported, or if the
		TLV is empty.

		The agent must throttle the generation of
		consecutive isisProtocolsSupportedMismatch
		notifications so that there is at least a 5-second
		gap between notifications of this type.  When
		notifications are throttled, they are dropped, not
		queued for sending at a future time."
	-- 1.3.6.1.2.1.138.0.16
	::= { isisNotifications 16 }


isisAdjacencyChange NOTIFICATION-TYPE
	OBJECTS {
		isisNotificationSysLevelIndex,
		isisNotificationCircIfIndex,
		isisPduLspId,
		isisAdjState}
	STATUS  current
	DESCRIPTION
		"A notification sent when an adjacency changes
		state, entering or leaving state up.
		The first 6 bytes of the isisPduLspId are the
		SystemID of the adjacent IS.
		The isisAdjState is the new state of the adjacency."
	-- 1.3.6.1.2.1.138.0.17
	::= { isisNotifications 17 }


isisLSPErrorDetected NOTIFICATION-TYPE
	OBJECTS {
		isisNotificationSysLevelIndex,
		isisPduLspId,
		isisNotificationCircIfIndex,
		isisPduFragment,
		isisErrorOffset,
		isisErrorTLVType}
	STATUS  current
	DESCRIPTION
		"This notification is generated when we receive
		an LSP with a parse error.  The isisCircIfIndex
		holds an index of the circuit on which the PDU
		arrived.  The isisPduFragment holds the start of the
		LSP, and the isisErrorOffset points to the problem.

		If the problem is a malformed TLV, isisErrorOffset
		points to the start of the TLV, and isisErrorTLVType





		holds the value of the type.

		If the problem is with the LSP header, isisErrorOffset
		points to the suspicious byte.

		The number of such LSPs is accumulated in
		isisSysStatLSPErrors."
	-- 1.3.6.1.2.1.138.0.18
	::= { isisNotifications 18 }

-- Agent Conformance Definitions
-- We define the objects a conformant agent must define

isisCompliances OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.138.2.1
	::= { isisConformance 1 }

isisGroups OBJECT IDENTIFIER 
	-- 1.3.6.1.2.1.138.2.2
	::= { isisConformance 2 }


-- compliance statements

isisCompliance MODULE-COMPLIANCE
	STATUS  current
	DESCRIPTION
		"The compliance statement for agents that support
		the IS-IS MIB.

		There are a number of INDEX objects that cannot be
		represented in the form of OBJECT clauses in SMIv2,
		but for which there are compliance requirements.
		Those requirements and similar requirements for
		related objects are expressed below, in
		pseudo-OBJECT clause form, in this description:

		-- OBJECT isisSummAddressType
		-- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
		--
		-- DESCRIPTION
		--    The MIB requires support for IPv4 Summary
		--    Addresses and anticipates the support of
		--    IPv6 addresses.
		--
		--
		-- OBJECT isisRedistributeAddrType
		-- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
		--
		-- DESCRIPTION
		--    The MIB requires support for IPv4
		--    Redistribution Addresses and anticipates
		--    the support of IPv6 addresses."

	MODULE 
	MANDATORY-GROUPS {
			isisSystemGroup,
			isisCircuitGroup,
			isisISAdjGroup,
			isisNotificationObjectGroup,
			isisNotificationGroup }

	-- 1.3.6.1.2.1.138.2.1.1
	::= { isisCompliances 1 }


-- List of all groups, mandatory and optional

isisAdvancedCompliance MODULE-COMPLIANCE
	STATUS  current
	DESCRIPTION
		"The compliance statement for agents that fully
		support the IS-IS MIB.

		There are a number of INDEX objects that cannot be
		represented in the form of OBJECT clauses in SMIv2,
		but for which there are compliance requirements.
		Those requirements and similar requirements for
		related objects are expressed below, in
		pseudo-OBJECT clause form, in this description:

		-- OBJECT isisSummAddressType
		-- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
		--
		-- DESCRIPTION
		--    The MIB requires support for IPv4 Summary
		--    Addresses and anticipates the support of
		--    IPv6 addresses.
		--
		--
		-- OBJECT isisRedistributeAddrType
		-- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
		--
		-- DESCRIPTION
		--    The MIB requires support for IPv4
		--    Redistribution Addresses and anticipates
		--    the support of IPv6 addresses."

	MODULE 
	MANDATORY-GROUPS {
			isisSystemGroup,
			isisCircuitGroup,
			isisISAdjGroup,
			isisNotificationObjectGroup,
			isisNotificationGroup,
			isisISPDUCounterGroup,
			isisRATableGroup,
			isisISIPRADestGroup,
			isisLSPGroup }

	-- 1.3.6.1.2.1.138.2.1.2
	::= { isisCompliances 2 }


isisReadOnlyCompliance MODULE-COMPLIANCE
	STATUS  current
	DESCRIPTION
		"When this MIB is implemented without support for
		read-create (i.e., in read-only mode), the
		implementation can claim read-only compliance.  Such
		a device can then be monitored but cannot be





		configured with this MIB."

	MODULE 
	MANDATORY-GROUPS {
			isisSystemGroup,
			isisCircuitGroup,
			isisISAdjGroup }

	OBJECT isisSysLevelType
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisSysID
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisSysMaxPathSplits
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisSysMaxLSPGenInt
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisSysPollESHelloRate
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisSysWaitTime
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisSysAdminState
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisSysL2toL1Leaking
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisSysMaxAge
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisManAreaAddrExistState
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisSysLevelOrigLSPBuffSize
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisSysLevelMinLSPGenInt
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisSysLevelSetOverload
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisSysLevelSetOverloadUntil
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisSysLevelMetricStyle
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisSysLevelSPFConsiders
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisSysLevelTEEnabled
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisSysReceiveLSPBufferSize
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisSummAddrExistState
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisSummAddrMetric
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisSummAddrFullMetric
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisRedistributeAddrExistState
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisCircAdminState
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisCircExistState
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisCircType
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisCircExtDomain
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisCircLevelType
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisCircPassiveCircuit
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisCircMeshGroupEnabled
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisCircMeshGroup
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisCircSmallHellos
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisCircExtendedCircID
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisCircIfIndex
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisCirc3WayEnabled
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisCircLevelMetric
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisCircLevelWideMetric
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisCircLevelISPriority
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisCircLevelHelloMultiplier
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisCircLevelHelloTimer
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisCircLevelDRHelloTimer
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisCircLevelLSPThrottle
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisCircLevelMinLSPRetransInt
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisCircLevelCSNPInterval
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	OBJECT isisCircLevelPartSNPInterval
	  MIN-ACCESS read-only
	  DESCRIPTION 
		"Write access is not required."
	-- 1.3.6.1.2.1.138.2.1.3
	::= { isisCompliances 3 }

-- MIB Grouping

isisSystemGroup OBJECT-GROUP
	OBJECTS {
		isisSysVersion,
		isisSysLevelType,
		isisSysID,
		isisSysMaxPathSplits,
		isisSysMaxLSPGenInt,
		isisSysPollESHelloRate,
		isisSysWaitTime,
		isisSysAdminState,
		isisSysL2toL1Leaking,
		isisSysMaxAge,
		isisSysProtSupported,
		isisSysNotificationEnable,
		isisManAreaAddrExistState,
		isisSysLevelOrigLSPBuffSize,
		isisSysLevelMinLSPGenInt,
		isisSysLevelState,
		isisSysLevelSetOverload,
		isisSysLevelSetOverloadUntil,
		isisSysLevelMetricStyle,
		isisSysLevelSPFConsiders,
		isisSysLevelTEEnabled,
		isisSysReceiveLSPBufferSize,
		isisSummAddrExistState,
		isisSummAddrMetric,
		isisAreaAddr,
		isisSummAddrFullMetric,
		isisRedistributeAddrExistState,
		isisRouterHostName,
		isisRouterID,
		isisSysStatCorrLSPs,
		isisSysStatLSPDbaseOloads,
		isisSysStatManAddrDropFromAreas,
		isisSysStatAttmptToExMaxSeqNums,
		isisSysStatSeqNumSkips,
		isisSysStatOwnLSPPurges,
		isisSysStatIDFieldLenMismatches,
		isisSysStatPartChanges,
		isisSysStatSPFRuns,
		isisSysStatAuthTypeFails,
		isisSysStatAuthFails,
		isisSysStatLSPErrors }
	STATUS  current
	DESCRIPTION
		"The collections of objects used to manage an
		IS-IS router."
	-- 1.3.6.1.2.1.138.2.2.1
	::= { isisGroups 1 }

isisCircuitGroup OBJECT-GROUP
	OBJECTS {
		isisNextCircIndex,
		isisCircAdminState,
		isisCircExistState,
		isisCircType,
		isisCircExtDomain,
		isisCircLevelType,
		isisCircAdjChanges,
		isisCircNumAdj,
		isisCircInitFails,
		isisCircRejAdjs,
		isisCircIDFieldLenMismatches,
		isisCircMaxAreaAddrMismatches,
		isisCircAuthTypeFails,
		isisCircAuthFails,
		isisCircLANDesISChanges,
		isisCircPassiveCircuit,
		isisCircMeshGroupEnabled,
		isisCircMeshGroup,
		isisCircSmallHellos,
		isisCircLastUpTime,
		isisCirc3WayEnabled,
		isisCircExtendedCircID,
		isisCircIfIndex,
		isisCircLevelMetric,
		isisCircLevelWideMetric,
		isisCircLevelISPriority,
		isisCircLevelIDOctet,
		isisCircLevelID,
		isisCircLevelDesIS,
		isisCircLevelHelloMultiplier,
		isisCircLevelHelloTimer,
		isisCircLevelDRHelloTimer,
		isisCircLevelLSPThrottle,
		isisCircLevelMinLSPRetransInt,
		isisCircLevelCSNPInterval,
		isisCircLevelPartSNPInterval }
	STATUS  current
	DESCRIPTION
		"The collections of objects used to describe an
		IS-IS Circuit."
	-- 1.3.6.1.2.1.138.2.2.2
	::= { isisGroups 2 }

isisISAdjGroup OBJECT-GROUP
	OBJECTS {
		isisISAdjState,
		isisISAdj3WayState,
		isisISAdjNeighSNPAAddress,
		isisISAdjNeighSysType,
		isisISAdjNeighSysID,
		isisISAdjNbrExtendedCircID,
		isisISAdjUsage,
		isisISAdjHoldTimer,
		isisISAdjNeighPriority,
		isisISAdjLastUpTime,
		isisISAdjAreaAddress,
		isisISAdjIPAddrType,
		isisISAdjIPAddrAddress,
		isisISAdjProtSuppProtocol }
	STATUS  current
	DESCRIPTION
		"The collections of objects used to manage an
		IS-IS Adjacency."
	-- 1.3.6.1.2.1.138.2.2.3
	::= { isisGroups 3 }

isisNotificationObjectGroup OBJECT-GROUP
	OBJECTS {
		isisNotificationSysLevelIndex,
		isisNotificationCircIfIndex,
		isisPduLspId,
		isisPduFragment,
		isisPduFieldLen,
		isisPduMaxAreaAddress,
		isisPduProtocolVersion,
		isisPduLspSize,
		isisPduOriginatingBufferSize,
		isisPduBufferSize,
		isisPduProtocolsSupported,
		isisAdjState,
		isisErrorOffset,
		isisErrorTLVType,
		isisNotificationAreaAddress }
	STATUS  current
	DESCRIPTION
		"The objects used to record notification parameters."
	-- 1.3.6.1.2.1.138.2.2.4
	::= { isisGroups 4 }

isisNotificationGroup NOTIFICATION-GROUP
	NOTIFICATIONS {
		isisDatabaseOverload,
		isisManualAddressDrops,
		isisCorruptedLSPDetected,
		isisAttemptToExceedMaxSequence,
		isisIDLenMismatch,
		isisMaxAreaAddressesMismatch,
		isisOwnLSPPurge,
		isisSequenceNumberSkip,
		isisAuthenticationTypeFailure,
		isisAuthenticationFailure,
		isisVersionSkew,
		isisAreaMismatch,
		isisRejectedAdjacency,
		isisLSPTooLargeToPropagate,
		isisOrigLSPBuffSizeMismatch,
		isisProtocolsSupportedMismatch,
		isisAdjacencyChange,
		isisLSPErrorDetected }
	STATUS  current
	DESCRIPTION
		"The collections of notifications sent by an IS."
	-- 1.3.6.1.2.1.138.2.2.5
	::= { isisGroups 5 }

isisISPDUCounterGroup OBJECT-GROUP
	OBJECTS {
		isisPacketCountIIHello,
		isisPacketCountISHello,
		isisPacketCountESHello,
		isisPacketCountLSP,
		isisPacketCountCSNP,
		isisPacketCountPSNP,
		isisPacketCountUnknown }
	STATUS  current
	DESCRIPTION
		"The collections of objects used to count protocol PDUs."
	-- 1.3.6.1.2.1.138.2.2.6
	::= { isisGroups 6 }

isisRATableGroup OBJECT-GROUP
	OBJECTS {
		isisRAExistState,
		isisRAAdminState,
		isisRAAddrPrefix,
		isisRAMapType,
		isisRAMetric,
		isisRAMetricType,
		isisRASNPAAddress,
		isisRASNPAMask,
		isisRASNPAPrefix,
		isisRAType }
	STATUS  current
	DESCRIPTION
		"The collections of objects used to manage the





		reachable NSAP prefixes."
	-- 1.3.6.1.2.1.138.2.2.7
	::= { isisGroups 7 }

isisISIPRADestGroup OBJECT-GROUP
	OBJECTS {
		isisIPRANextHopType,
		isisIPRANextHop,
		isisIPRAType,
		isisIPRAExistState,
		isisIPRAAdminState,
		isisIPRAMetric,
		isisIPRAFullMetric,
		isisIPRAMetricType,
		isisIPRASNPAAddress,
		isisIPRASourceType }
	STATUS  current
	DESCRIPTION
		"The collections of objects used to manage configured
		IP addresses."
	-- 1.3.6.1.2.1.138.2.2.8
	::= { isisGroups 8 }

isisLSPGroup OBJECT-GROUP
	OBJECTS {
		isisLSPSeq,
		isisLSPZeroLife,
		isisLSPChecksum,
		isisLSPLifetimeRemain,
		isisLSPPDULength,
		isisLSPAttributes,
		isisLSPTLVSeq,
		isisLSPTLVChecksum,
		isisLSPTLVType,
		isisLSPTLVLen,
		isisLSPTLVValue }
	STATUS  current
	DESCRIPTION
		"The collections of objects used to observe the LSP
		Database."
	-- 1.3.6.1.2.1.138.2.2.9
	::= { isisGroups 9 }

END
